I've got an Excel document with over 323 entries and I need to search the data to find where ever a certain keyword is mentioned and copy the entire row into a separate sheet within the same workbook. However, I have a list of around 323 keywords and there is AND condition as well.so doing this using Ctrl+F would take some time.
The data is in Sheet "Training Dataset" and the particular column that needs to be searched is Column "A" . "Training Dataset" is the sheet where I would like the found results to be copied to in the column B and C. The list of Keywords that need to be searched for are located in Sheet "Keywords" , starting from Cell C and D.
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
I am trying to lookup two distinct values in two columns (turquoise and green) in 'Cust data' tab and correlate them to the same values in two columns on 'Driver activity' tab, then return a result from column in yellow on 'Driver Activity' tab to populate the driver name in yellow column on 'Cust data' tab.
I have a table in excel with a group of headings. (Serial Number, Model, Description, Repsonsible and a few others) What I would like to do is be able to search every cell within the range of that table. When the user clicks search an inputbox is displayed and you can enter any search term you like. if there is a match within the cell range, i want the entire row (and the heading row always at the top) printed into a new sheet to display results. There may be a match in multiple rows, and id like evrery row displayed.
vba script to convert the text in a cell(split considering "Space" as delimiter) into multiple Rows and Single column & the resultant row's(A1:A7000) values need to be searched in Column(B) of another sheet,if the search result is false then the value in the row need to be highlighted in red.
I am able to split the values in one column into mutiple rows,but need to have all the resultant values in a single column. i,e,.
I am able to split it as below:
Column A Column B Column C
for second situation - search I could search based on the values by using Vlookup() function,but unable to highlight when search result is false.
if the search string "ACB" in Sheet1 is not available in the sheet2, then value "ACB" should be changed into red.
If I have a 'key' value in a cell in one sheet, i want to use that value to find the cell in another sheet containing the 'key' and return the row number of the cell, if more than one value then I would like to be able to loop through all the rows containing that 'key' value returning the row number of each hit, kind of a programmatic version of vlookup?
So basically I have an Excel sheet which has keywords that need to be entered in Google search. I need the URL of the first page of the search result that appears after that keyword is entered. IS there a macro for the same?
I have a spreadsheet that contains data for a fiscal year broken out by month and quarter. I want the formula to return the data from that month and use whatever the latest quarter is. For example in the data below:
If it has only pulled data only thru Q1 it would return Q1 for Jan-Mar, however once I have Q2 data I would want the formula to return Q2 for the months of Jan-Mar.
2013Thru Q1STOLISTOLIJan-2013STOLI BASE 2013Thru Q1STOLISTOLIFeb-2013STOLI BASE 2013Thru Q1STOLISTOLIMar-2013STOLI BASE 2013Thru Q2STOLISTOLIApr-2013STOLI BASE 2013Thru Q2STOLISTOLIMay-2013STOLI BASE 2013Thru Q2STOLISTOLIJun-2013STOLI BASE 2013Thru Q3STOLISTOLIJul-2013STOLI BASE 2013Thru Q3STOLISTOLIAug-2013STOLI BASE 2013Thru Q3STOLISTOLISep-2013STOLI BASE 2013Thru Q4STOLISTOLIOct-2013STOLI BASE 2013Thru Q4STOLISTOLINov-2013STOLI BASE 2013Thru Q4STOLISTOLIDec-2013STOLI BASE 2013Thru Q4STOLISTOLIDec-2013STOLI BASE 2014Thru Q1STOLISTOLIJan-2014STOLI BASE
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
ï»¿ï»¿So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5 and Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
I entered exactly 113,876.92 in cell L16 I entered exactly 113,390.02 in cell L17 I entered =L16-L17 in cell L18 L18 incorrectly shows the result at 486.9000000000009000 (note the extra "9" after the 11 zeros). When I expand the viewable digits on L16 and L17, they have ALL zeros after the cents. (I went out at least 25 digits). I can't be the first one encountering this.
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
I am trying to run a prestored query in a Access database and popuate the result into a Recordset --- through Excel. So far, I have managed to accomplish that using the code below. However, now I need to update some records in the recordset. The code below does not allow me to do so.
The following message prompted when the code tried to update the record: Run-time error '3251' Current Recordset does not support updating. This may be a limitation of the provider, or of the selected locktype.
This is written for other users who only knows how to create a query in Access. And the users prefer not to import the query results to spreadsheet.
*Someone suggested use Recordset.Open however, that seems to work only with SQL statement but not prestored Queries.
Code: Sub RunExistingQuery() 'Execute prestored queries in Access Dim Con As ADODB.Connection
I have a formula that needs some tweaking. This formula is to reference the ACCT and find the “best” contact information and return the result to the Merge sheet. If the ACCT does not have a Parent then you reference the ACCT to the abc_Phonelist sheet. If the ACCT does have a Parent then use the Parent ACCT since it has a more desirable account number to reference against the abc_Phonelist. If the ACCT or the Parent ACCT uses Processors then the ACCT from the Processors sheet has the best reliable account number to reference against the abc_Phonelist. In sum, there are three different possible “number tiers” that can be used. The first, the ACCT phone number. This means that the ACCT has neither a Parent nor a Processor. The second, the parent ACCT phone number. This means that the ACCT has a Parent, but neither the Parent ACCT nor the ACCT has a Processor.The third, the Processor phone number. This means that either the ACCT or the Parent ACCT has a Processor phone number.....
Currently I am using excel 2007. In that I have two sheets (sheet1 as Dashboard & Sheet2 as Database). On sheet1 I need to develop a functionality of searching as per key word (Keyword will be typed on cell B2) and i need to display search data below cell B2 till whatever cells depending as per database.
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
I deal with a rather large excel database (the range is A1:AV168266) that contains customer information. Some of these various customers are affiliated with a group called "ascend" and I need to be able to filter all my list by every customer affilliated with Ascend. The trouble is that the word "ascend" can appear in 8 different columns and usually when it appears in one column it doesn't appear in the others and their can also be more text in the cell beyond the word "ascend". I want to create a formula that will simply look for the word "ascend" in any cell of a row and return a result I can filter by. I will be putting the formula in column AW and put it in all 170,000 rows of that column, that way I can just filter by a single column.
I've played around with combining COUNTIF with SEARCH and MATCH with SEARCH but nothing seems to work.