i have a large table and i need separate x and y coordinates(to plot on a graph) of a particular repeated value that is known to me in a large table of numbers. how can i do this?
View 4 Replies
I have a sheet named formula the column highlighted in orange will be used in searching to the other sheet which is the table, I try to used the formula VLOOKUP but it didnt work.
View 5 Replies View RelatedI have a cell in F2 that looks like this...
513 BLUE RIDGE
Kansas City, MO
(39.104810141000485, -94.47983043799968)
I need to isolate the coordinates in separate cells. IE "39.10481014000485" in cell J2 & "-94.47983043999968" in cell K2. The problem is that some of the cells don't have 14 numbers behind the decimal, and my formula will sometimes grab either the comma ( "," ) or the end parenthesis ( ")" ). Is there a formula I can use to isolate the two coordinate plots?
The good thing is every cell is formatted exactly like this. I had been using a formula that looks like this.
=MID(F2,FIND("(",F2)+1,18)
I think it's close. I just cant figure out how to tell the formula to stop at the first comma, and to stop at the end parenthesis for the second set of coordinates.
If the could be longer I would have included "when multiple cells can contain the same value"
I have a very large dataset that I would like to apply the following searches to, but I will include a smaller sample that gets at the point.
For example; in the following sheet:
Cat Dog Lizard
Red 1 2 3
Yellow 4 5 6
Green 7 8 1
If I search for "2", I would like to get back "Red" and "Dog". I was able (by looking at other posts) come up with a series of formula that allow me to obtain the sheet coordinates and convert them into column and row headers (using SUMPRODUCT Row/Column); however, when multiple cells contain the same value, the output becomes the sum of that coordinate and is no longer a reference to a specific header, so a search for "1" would not give me "Red" and "Cat". Ideally, if I searched for "1" I would get back "Red" & "Cat" as well as "Green" & "Lizard", but I would be satisfied with a formula that even just gave me back one of the two header pairs.
JordanSample Workbook.xlsx
0000AAAAABBBBBCCCCCDDDDD
1111SugarRaisinDirt
2222MilkWaterWaterFlour
3333FlourSugarDirt
4444EggsWaterFlourSugar
5555WaterMilkDirt
I looked for a way to represent my data in a cleaner way than this but couldn't find any tools....a point in the right direction would be helpful. I guess the old plug-in that converted Excel->HTML isn't available?
Column A is a finished product and B-D are the ingredients to make it however values in Column A are also ingredients (sometimes multiple times). I want a formula that searches for values in Column A within the table B1:D5 and returns an array, if possible, of the finished products where Column A was used.
For example, searching for Sugar would return "Flour, Water". Searching for Water would return "Milk, Eggs" (I'd rather not have Milk listed twice but beggars can't be choosers).
I have two worksheets that Data might be present,
Holdtickets and "another sheet"
Here is my code:
Code:
Dim i As Long
Dim LastRow As Long
Dim wsEachSheet As Worksheet
Const strDestSheetName As String = "Hold Tickets"
Const strDestSheetName2 As String = "Enter Order"
[Code] ........
I don't want to show the location as being the worksheet "Hold Tickets" so i had to remove it from the search, But the data is still important
I need a macro code that will locate the data in "another sheet" and return the values from there, but if it is also present in the worksheet "Hold tickets" then
This part of the code will need to look like this:
Code:
Sheet1.Range("B7").Value = wsEachSheet.Name & "Hold Tickets"
I have been working on a variation of this for a long time and I cannot get it to work.
I am trying to depending on the textbox selection get the proper ROW from DEALLIST to show up.
In a large spreadsheet that receives external data, I have codes (U, N or V) allocated at various times to different rows as shown in sample worksheet attached. Elsewhere in the spreadsheet, I need to display (for later export) these codes along with their respective number in a sorted list. Please review the attached:
In the spreadsheet you'll see a column of codes, the next column is the data reference number, then to the right is three columns, one for each code. As displayed in the sample book attached, each Code column is to display the data reference number (from column 2)that matches that column's code.
What formula can I use to list these numbers in the appropriate columns?
I'm looking for a formula to search for a value in the SECOND (instead of first) column of a table array and return a value in the same row from FIRST (instead of the same or another) column in the table array. Formula would be searching for the unique production order number in the column B and return production line id from the column A.
A1 production line_id
B1 poduction_order_number
A2 L1
A3 L2
A4 L1
B2 505212
B3 504234
B4 505663
I was trying vlookup(504234;B2:A4;2;0) to make formula go search from right columns to the left but then excel is switching the search table to A2:B4 and gives #N/D!
One remark-there is no possibility to switch these 2 columns to simplify. I have to leave them as they are.
I have a complex list of text (a chart of accounts) with various roll ups for subtotals on one worksheet, and monthly download on another worksheet showing the name of the account and the value. I wish to use match the text to return the value in the front sheet and avoid taking the simple route of linking the cells in case additions are added during the year.
I've tried using IF and VLOOKUP formulas without success - i guess becasue I cannot sort the table in descending order?
What would be the best sort of formula to search using the text, and return a value on the same row?
I have my data arranged in a table on sheet1 as shown below.
Columns B to H contain the hours each person normally works on the days of the week Sun to Sat. In columns I to O are the hours that each person has booked as holiday for that week.
On sheet2 I would like to be able to enter a holiday day in C1. In A3 to A15 I would then have a list of all the people who will be working on that day and in C3 to C15 have a list of the people who are on holiday so the output on sheet 2 would look like this.
Basically I'm after the formulas for A3 and C3 that can be copied down the column depending on how big my table gets. I am using Excel 2010.
I have sheet 1 that in cells V5:V20 is a data validation drop down box. In cells W5:W20 I have another data validation drop down box. On sheet 2 I have a table that in column A matches the data in the drop down box's in column V on sheet 1. Row 1 on sheet 2 data matches the data in the drop down boxes in sheet 1 cells W5:W20. What I'd like to do is on sheet 1 Cells Y5:Y20 have a VBA code to lookup the data in columns V and W from sheet 2 and return the value.
Windows 7
Excel 2010
I have a table with list of equipments and asset number assigned as primary key, I wanted to have a history movement of these equipments but my idea is somehow not logical and very primitive to update every time 2 excel sheets:
ie:
asset no
description
received by
day
[Code].....
I have been working on this 2 weeks and have finally come to the conclusion. I am trying to use index/match to find an article number in any 1 of 3 attribute files workbooks. I have been am using Vlookup, but the Master attribute file workbooks DO NOT list the article number in column A (but list them in F) and therefore I have been creating an altered copy every month to place the article numbers in column A so VLOOKUP would work. Index/Match would be a more efficient look up formula as I could link directly to the Master Attribute files without altering the workbooks.
Below is the formula I have been using that looks in 2 attribute files workbooks
=IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)),
IF(ISNA(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE)),"",
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[PartAttributes.xls]PartAttributes'!A:D,2,FALSE))),
(VLOOKUP(A8,'C:Recon Workbook FilesService FilesAttributeFiles[TireAttributes.xlsx]TireAttributes'!A:C,2,FALSE)))
Below are the three (the new formula would incorporate a 3rd attributes workbook "Other" to the search criteria) Index/Match formulas I would like to "Tie" together to find the article number in any of the 3 attribute files workbooks and return column A if the article number is present or nothing if the article number is not present in any of the 3.
=INDEX('C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!A:A,MATCH(A8,
'C:JDAAttributeFiles[OtherAttributes.xls]OtherAttributes'!F:F,0))
=INDEX('C:JDAAttributeFiles[PartAttributes.xls]PartAttributes
[Code] .....
I'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
I am trying to get the lookup function to return the corresponding value in a separate worksheet where it occurs more than once in the lookup range.
At the moment it is only finding the first match. i.e. in
=VLOOKUP(A2,'Appointment Tracker'!A2:B9999,2,0)
If this has been requested already, I apologize, please direct me to the right thread and flog me with USB cable. I've been searching the forum for an answer for a couple of hours now for the answer to this:
I have a list of words in column A on a sheet and I'm trying to write a formula on another sheet that will check all cells on a pre-populated row and return a value if any of the words from the list on are contained in any of the cells in the row. I've attached an example spreadsheet
I am attempting to do a search on a 2 dimensional table, based on Product Code/Month. Is there a function, addin or a macro that will allow me to do this? All I can come up with is a messy combination of VLOOKUP/HLOOKUP/COLUMN.
View 2 Replies View RelatedSheet2:
col A = contains the style#
col B = contains the color of the style
col C = contains the size of the style
col D = contains the qty of the style,color, size
Sheet1:
I would like to do the following:
A1 = input the style #
B1 = input the color of that style
C1 = input the size of that style
then D1 should automatically contain the qty of the mentioned style, color, and size.
I'm using a formula to lookup names within text and return that name to a separate column if it's found.
The formula is =INDEX($E$1024:$E$1026,MATCH(FALSE,ISERROR(FIND($E$1024:$E$1026,E1010)),0))
I understand index and match functions, but I'm confused regarding the use of FALSE as the lookup value and the iserror(find( usage.
I would like a formula that will take the info from 2 cells (not adjacent to each other or in the same row) and then look these up in a table giving the answer in the 3rd column somewhere else on the worksheet.
View 5 Replies View RelatedI've got an excel worksheet that contains a list of buildings and their associated control valves for water supply (subset of table attached).
I'd like the user to be able to search by building name to display its associated valves and control information. I realize I could use the list function on the worksheet, but would prefer to set it up as front page to the workbook where data is displayed in a nicer format.
I guess my question is if there any way I can set up another worksheet with a drop down box that allows the user to select a building or type in the building name and have its corresponding data display?
Im using a table so I can sort diffrent catagories and I'm trying to put other functions to the right of the table I noticed as I change the sort on the table is moves the information outside the table as well is there a way to seperate that information or do I just need to move it above my table?
View 2 Replies View RelatedTable1 (TeamA)
Table 2 (TeamB)
Name
Date
Name
Date
Table 3 (TeamC)
Table 4 (TeamD)
Name
Date
Name
Date
Given above is a single Sheet in excel with Four Different Tables for each team. I would like to scroll and enter data separately in each Table.
Say for Example Table 1 Team A
Scroll through the rows (1-100)
Enter Data (in any row)
Freeze panes at header
Likewise for all the tables separately. I had tried using split panes, but that is not what i am looking for.
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedHow can i count "how many "A" for period date in table and date out table in this case"
Date inDate outresult Count
05-Mar08-MarA ?
05-Mar09-MarB ?
06-Mar07-MarA ?
07-Mar08-MarB ?
07-Mar08-MarB ?
08-Mar09-MarC ?
05-Mar08-MarA ?
05-Mar08-MarA ?
I have a worksheet with 10000 records. For example, entire data in ColA-ColZ. In that, ColA-ColF - Personal Information; ColG-J Group1; ColK-N Group2; ColO-R Group3; ColS-U Group4; ColW-Z Group5. I this case, the data to be copied into another sheet as follows:
1) the personal data should be copied repeatedly.
2) Each Group data should be copied next to personal data.
3) The group's name is mentioned at the top of the datasheet.
I have attached a sample workbook for your kind reference.
I have a data input sheet on a spreadsheet with a pick list where we can select an option, but I need another 'flat file friendly' option to appear on a second sheet where the data will be pulled from. For example
If on the front sheet Flat Roof Insulation is selected, it needs to return FRI into the other sheet, there are 45 options in the list.
I am sure the answer to this is out there somewhere but I haven't been able to find it. Thank you in advance for the help - I just can't figure it out.
I have several identically formatted worksheets (for different departments) with macros that reorganize the data in each sheet. I also have a list of managers with their respective departments in this same workbook.
I want a macro that will save these department sheets (values and formats only) in new workbooks - the manager's name - according to the list. I also need the macros that reorganize the data to work without referencing the original file.
I'm having an issue and I've tried thinking of all the work arounds and haven't come up with a usable method. I built a form that pulls info from a Pipeline table. I wanted to keep track of all the people that make edits on a separate table. Is there a way to take the original info and paste it on to another table by way of a click() and allow the others to make edits on the fly afterwards? This has been bugging me all week.
View 3 Replies View Related
