I'm having a problem getting this macro to work with the variants that have a letter in them. "A0220" and the like. All of the number only variants are found and highlighted just fine. What do I need to do to get the macro to find the letter ones? Here is the macro I'm working with currently.
View 11 RepliesI have a worksheet with multiple sheets.
Users and Data
In users column A has email contacts from people that accessed a recoding on line. I need to be able to cross reference with another sheet called data where I will have their full name.
Basically I would like a macro that will check column A in users sheet and check in data the name column . If it finds last name or partial name in the mail it will highlight it in the users sheet and in the name column in data
User sheet
Column A is raw 1 is heading username
data sheet
column B is raw 1 Last Name
That way I am able to quickly identify a group of people if they did not watch the recording as user gives me indication on what they did.
I am attempting to search a row of data and highlight the cell that has MAX value.
How am I able to do this? I would also like to run this in a loop so I can perform this function over multiple rows
I have a data base sheet...now i want to find the text,string,word into the database sheet and want the results to search-engine sheet..i can do this with the help of advanced filter but now i m not able to highlit that text what i find in the search criteria cell...
View 15 Replies View RelatedI have 3 worksheets A, B and C. Worksheet A and B have numbers in three columns. In worksheet C, column D, I would like a formula or conditional formatting which will search worksheet A for the number in column D and if it finds the same number as the one in the cell, it highlights the cell Green. I would also like it to search worksheet B and if the number is in worksheet B, highlight the cell Red. In no cases will the number be in both worksheets (A and B).
View 9 Replies View RelatedI've got a large Excel table that's full of names and e-mail addresses - it's a report of e-mails that merges some data from two systems we use; a registration form and a database. We want to clean up the data so it only lists folks who 'registered' (it's not always BOTH people listed - sometimes it's only one!) - and the best way to do that is to take the information from a specific column in each row, see if it exists elsewhere in the row and clear the information that doesn't match.
For example:
-A----------------B------------------C--------------------D--------------E------------------F-------------------G-
John ---------- Smith -------- js@email.com -------- Jane -------- Smith --------- js@email.com ------ John
Richard ------ McGee ---------j@email.com-----------Jim----------Samename ----jsn@email.com-------Rich
Mary-----------Ladyface ------ms@email.com--------Steve -------Smith ----------ss@email.com-------Steve
Ideally, for each row I'd like to search A and D for the string from column G. If it finds it, the cell and the two cells to the right are fine - but everything else is 'cleared' (not deleted).
So the above table would look like:
-A----------------B------------------C--------------------D--------------E------------------F-------------------G-
John ---------- Smith -------- js@email.com --------------------------------------------------------------- John
Richard ------ McGee ---------j@email.com-----------------------------------------------------------------Rich
-------------------------- -------------------------------Steve -------Smith ----------ss@email.com-------Steve
Within conditional formatting I use =COUNTIF(Task,I4)=0 and it highlights the non-matches. Task is a named range which works fine, but how could I actually just use a string instead of the named range? The named range only consists of Major and Sub. My first guess would be =COUNTIF({"Major";"Sub"},I4)=0 but this is not working.
View 4 Replies View RelatedI'm trying to create a leave calendar for staff. I would like to paste in the staff members sick and annual leave dates.
I would then like a conditional format that would highlight the leave dates onto the calendar, so i can visually track attendance and check for any sick leave patterns. My calendar looks like below for each month, and although it shows just the date in excel, i have formatted it so its actually the full date (ie instead of 1 it is 1/7/2013, but just displaying 1)
Jul-13
MTWTFSS
1234567
891011121314
15161718192021
22232425262728
293031
Whilst i can easily track and input the public holidays (on an individual basis) i'm looking to highlight the whole calendar area, say cells (c5:i10) as the search area and then have the leave data as a whole search area (at2:at150)
Above is part A of my question. To further complicate it, if it can even be done. The leave data i get from my system only has the start date of the leave, in another column it has the end date, and in another column it has days absent, if we can do it so it adds the days after (total leave days) to highlight in the calendar that would be amazing, if not, i'll just amend the data to have every date of the leave listed
Leave Type Start Date End Date Days Taken
In an Excel 2010 worksheet I use three columns. I need a user to be able to input a word or phrase into a cell or input box, and have Excel highlight that word or phrase every place it occurs only in column C.
Can I do that with conditional formatting? Or do I need to use a function? Or do I need a macro?
When I do a SEARCH operation to find the number 10 among hundreds of cells containing data, I'm often finding the way Excel highlights the cell that meets the search result is not easy enough to see.
Is there anyway I could setup Excel so that the resulting cell that meets the search result is highlighted in a RED border or RED Fill? I would like the cell that meets the search result to scream at me with a color highlight that is not easy to miss.
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I am trying to compile a staff duty rota which has 3 separate columns of names. I would like to type in name in a cell eg A1 and have all instances of that name in the columns highlighted in red. I would also need an option to remove the highlights as and when required. I am using excel 2007 and I only have a very basic understanding of code.
View 4 Replies View RelatedCan this be automated?
I have an excel sheet called "Summary Tab" where I highlight specific rows that has the largest variances for the month. And, then within the same workbook I have about 10 different sheets which has more info regarding the accounts hightlighted in the "Summary Tabs".
For example, the following accounts were hightlighted in grey in the summary tab.
-------- Column A
Row 1 -- Training
Row 5 -- Printing Expense
Row 9 -- Travel Expense
Row 12 -- Telephone Expense
Now, i have to highlight the same accounts in Prior Yr, Current Yr, Detail tab...etc (all of the sheets in the workbook has different row for training, printing...etc
I tried recording this but it doesn't work like it should because each month the variance could be different.
i have a loop which runs through column A and column B and if the value of column A is less than the corresponding value(same row index) of column B, then i need to highlight both the cells...
View 9 Replies View RelatedHere's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View Relatedi have all countries in column A in sheet 1 and some countries in column A in sheet 2. how can i highlight same countries between two sheets from column A to Z in sheet 1
for example in sheet 1 column A is:
Albania
Algeria
Bangladesh
Belarus
Belgium
Belize
Benin
Bhutan
Bolivia
Botswana
Brazil
Bulgaria
Burundi
...
and in sheet 2 column A is
Algeria
Belarus
Belgium
Benin
Bhutan
Bolivia
...
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
abcxyzzyz
1009080zyz
506070abc
Have a formula that quotes the supplier at cell D2 , is there a macro that will highlight the minimum value each line that is 80 and 50 to be highlighted
Yes I know =min(a2:d2) will do the work
Macro copy & paste highlight. I HAVE THIS CODE
View 4 Replies View RelatedI have a large spread sheet. I need to find 38 accounts in the spreadsheet, highlight them across the span of the spread sheet and then do a sum if to the side. I need to use this Macro monthly on a new ageing and some months some of the accounts may not be in the ageing.
View 14 Replies View RelatedHow to create a macro that would highlight a row that has the following condition :
name
ref num
sam
123456
sam
123456
alice
342333
In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"
I would like a macro to highlight duplicate numbers in Col A in Sheet1.
View 4 Replies View RelatedI have a spreadsheet with month names in column A10 and down and want to highlight the row based off a cell(which will be A3) so if cell A3 = Nov it would highlight all rows that have Nov in column A. I don't want to highlight the entire row just columns A.
View 5 Replies View RelatedI have a macro that displays a calendar with code to highlight the current date, but this part of the code does not work and the current date is not highlighted.
View 14 Replies View RelatedI have created a macro to open a workbook from another workbook and do a vlookup against the data in the source workbook. I then wanted to highlight the cells in the in the workbook that I'm doing the vlookup from, and to unhighlight any empty cells. I did this all without code using the macro recorder so that I could then study the code and learn something.
View 2 Replies View RelatedIs there a way i can have a macro find the unique values in these 3 columns and highlight them yellow.
They should find uniques using all 3 columns, not find them within each column.
I included a file which shows what i start off with and what it needs to look like. Also if it matters the contents in the cells are from links. ( i know that matters because you have to put look in values in the code ).
I need a macro to highlight a cell based on other cells.
For example:-
1. I wants to highlight A3 in red if all the cells from I3 to Y3 are empty.
2. I wants to highlight A3 in yellow if I3 is filled and J3 is empty
3. I wants to highlight A3 in green if if I3 is filled and J3 is also filled.
Actually I am having a grid which shows all the components of watch like KIt, case, dial , strap,hands.
The A row is purchase order no and then I3 and J3 belongs to KIt means if a po is not then I3 and J3 are empty so A3 is high Lighted in REd and if a po is placed then we put supplier name in I3 and it changes the color to yellow and when a po is confirmed we put confirmation date in J3 so A3 turns to green.
So in this way we can see if any Po is not yet placed or not yet confirmed based on cell color.
I would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
I have 1 workbook contains 2 Sheet with Name and Address in Column A,B,C,D. Sheet1 always contains New Data of Name and Address and its import from another software.
I need a macro to Compare these 2 sheets, Highlight the rows which is not in sheet2
If two parrallel cells in column D & G equal "0" then highlight that row with ======== (Thin Horizontal stripe)
Example:
D2 and G2 both = "0" ( Macro Applies. Row 2 is highlighted with Thin Horizontal Stripe).
D2 and G3 both = "0" (Macro does not apply since they are in different rows)
D2= 1 G2=0 (Macro does not apply since they both dont meet condition.)