Create a macros, which sets any checkbox in the next excel file
fist link
http://narod.ru/disk/12388811000/car_test.xls.html
or another link of the same file
http://rapidshare.com/files/271305333/car_test.xls
I can't find the name of any checkbox.
married, widows, single checkbox is selected
macro solution
good work.
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedVBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedOn the attached Dynamic chart I have attached there are 3 checkboxes to display certain data. My issue is this, if I click the outside checkbox and the ISE checkbox at the same time that is OK, it gives me a comparison of the two data sets in a bar chart. Perfect. If I click just the total checkbox it gives me the total info of the outside and ISE, again perfect.
But, If I click all 3, it doubles all the numbers because total is total and outside + ISE also equals the total.
My Question,
-Is there a way to lock out a checkbox if another is active?
if 1 then no 2 or 3. if 2, 3 is OK but 1 is not. if 3 then 2 is ok but 1 is not?
-If it can't be locked can it do something like; If #1 has a check and you try to enter #2 a red error message could come up saying these two choices together the data will be inaccurate. I'm thinking this might be done in conditional formatting.
If option one is doable and easy, is it also possible to have an error message like in my second idea so people will know why they can't click that second box? This would be my preferred fix but I am open to any other option you may have to accomplish this.
I want to turn on (tick) a check box from within a macro.
Checkbox reference. I am using the following code
View 4 Replies View RelatedI have 20 check/tick boxes on my worksheet (CheckBox1-20), each of the 20 tickboxs has its own linked cell A1-A20 - I wish to have another checkbox (checkbox21) that, when ticked will tick all of them.
Also, if unticked it will untick the 20. I'd like this to be a kind of "onclick" command - so that if I wanted to tick 5 of the 20 on their own, the "master" tick box won't interfere with this. If a command button is easier to code than this is just as good.
I've been looking online on on here for the last 2 hours with no joy, not even getting close.
I am using Form Controls rather than ActiveX controls.
I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"
View 6 Replies View RelatedI have a RibbonX checkbox that I have added to my ribbon. I am able to attach code to the OnAction callback and when the user clicks the box, the code executes properly. Now for my issue. How can I change the checkbox from checked to unchecked and vice versa within VBA?
My situation is this:
I store a list of employees with certain elements such as start date, department, title, etc. in a table. One of the fields is Inactive which shows whether they are active or inactive. I may want to see all the employees, or just the active ones. My checkbox will allow the showing of both inactive and active employees. The user may wish to save the default setting for this and so I have created a table that holds a Boolean True or False for whether to show inactive employees or not by default. The checkbox always shows unchecked by default when the workbook loads, and I want to change the textbox's checked state based upon the value in the table.
I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies View RelatedI have a sheet with a number of checkboxes, and I need to conditionally enable/disable some of them.
For example, if the user checks Box1, then the question for Box2 becomes relevant and Box2 becomes available. If Box1 is unchecked, Box2 needs to be unchecked and disabled.
Can it be made in VBA as follows:
I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.
When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.
I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines
i want to create a chart ,the chart have a checkbox beside it.
so i can check which line to display....
example
test1 (group112data,group113data)
test2 (group112data,group113data)
then the chart selection is to select 1 then it will diplay group112 result (test 1 and test2),this is to make comparison
can i do it for normal chart?
or must use pivot chart?
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
View 4 Replies View RelatedI have a sheet that have 100 checkbox. i want to select(not check) all checkbox for change their property.
How can I select all? (by macro or other way)
I have a userform1 with textbox1, checkbox1, checkbox2, checkbox3 and checkbox4. What i want to accomplish is
[Code]....
I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
I have drop-down list in cell C4 and inserted Checkbox next to it. Drop-down list has a blank default value. I want Checkbox to be ticked If value in C4 is not blank. My code so far is:
[Code] ......
I attached sample spreadsheet : EF989727_re.xlsm‎
I have a command button and ten checkboxes - one for each row of a list. I need a macro that will delete the rows of every checked checkbox when I press the command button.
The list starts in row 3 and continues to row 12. Checkboxes are checkbox1 for row 3 to checkbox10 for row 12.
I need to get the state (xlon or xloff) of check boxes on a worksheet. i have tried the following but unable to get it to work.
View 3 Replies View RelatedNot sure if this can be done. Here is a example of my project
View 11 Replies View RelatedNot sure if this can be done, when I enter data for a journal only the data with the box checked is entered? I hope my example shows what I mean.
View 9 Replies View RelatedI have a checkbox with a userform. I can get it so that if I enable it and add data then it correctly shows as "Yes" or "No" within excel. However if I open the data using offset the checkbox is greyed out with neither Yes or No. Is there a way to make the checkbox allow and show a value of Yes/No?
View 7 Replies View RelatedI am trying to do is develop a electronic visitors log in excel that has three statements visitors must read and accept before they can enter. I have a userform with date/time, name etc, then the three buttons that open another user form with the statements for them to read and 2 command buttons (Accept and Decline), Accept takes them back to the log-in userform and Decline closes all forms.
The problem I am having is I can’t get the checkbox on the log-in form next to each statement to go true when the accept button is clicked for said statement. I would like to disable the checkbox on the visitorsignin form so the only way it goes true is from the statement form.
I hope I explained myself well enough for someone to understand what I’m trying to do, the code is not finished yet either, still waiting for signature pad to come in so I can paly with it and figure out how to incorporate it into the file.
I've a userform with 5 checkboxes and 1 botton
I need that every checkbox has a number associated so when i click in botton1
those values sum
e.g.: associate value 5 to checkbox1, 3 to checkbox2 and 10 to checkbox3, 4 to checkbox4, 13 to checkbox5
If I enable checkbox1 and checkbox2 in sheet("auxiliar").range("E5")=(5+10) after click botton1.
I am trying to create a workbook where the first worksheet has a list of Checkboxes and each checkbox 'unhides' or 'hides' subsequent worksheets within the workbook, depending on whether the box is checked. I can make the checkbox, I can record the macro.
Sub Test_checkbox()
' Test_checkbox Macro
Sheets("Dist").Visible = True
End Sub
How do I link them together? Ideally, I'd like to have my boss be able to 'play' with which sheets are visible (check, uncheck, check, uncheck, etc) .
I want a macro to be activate ONLY when I check the checkbox. Right now, it activate the macro each time I checked the box.
I want the macro to be activate ONLY when I put the check sign in the checkbox. Is that possible?
