Select Last X Used Cells In Column
Oct 30, 2006
I would like to select the last few cells in a column, however the number of rows is not fixed, it changes. This can only select the fifth last cell:
Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
Ultimately, i want to select the 5 cells from the fifth last to the last:
from this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
to this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(0, 0).Select
If possible, with the cells selected, can i do something similar to this:
Range("B62:B67").Select
Selection.AutoFill Destination:=Range("B62:B114"), Type:=xlFillDefault
Range("B62:B114").Select
The underlined parts is the part which make me headache. How do i solve this?
View 2 Replies
ADVERTISEMENT
Nov 14, 2006
I have found and selected the very last cell in a column (Say column A). What code do I select all the cells from A1 to that last cell?
View 4 Replies
View Related
Mar 29, 2013
I have a huge excel file (who doesn't ) and would like to create a macro to select cells between 2 blanc cells in a column. (Then another macro will continue to select all in the table for that specific range and copy-paste to another sheet. But this part is not relevant)
The details
The table will be like below.
So the macro should select between F2:F6. (then another macro will copy F6:A3 and cut-copy this range to another sheet); and when I re-run this macro this time it will copy the range of Model B..
A
B
C
D
E
F
[Code]...
View 2 Replies
View Related
Aug 6, 2014
[Code] .....
The above code works fine when I have information stored in multiple cells (C9, C10, C11, etc.). However, if I only have data stored in C9, my selection is expanded to the last row. I need a way to select all the data up to first empty cell even if the only cell containing data is C9.
View 4 Replies
View Related
Jan 9, 2014
In cells A71:A140 I have the following formula: =IF(A4"";A4;"").
How can I select only the cells in range A71:A140 where the formula has returned a value (number or text) and not the blank cells? When I try ctrl + shift + down arrow, all cells in the range are selected...
View 2 Replies
View Related
Aug 19, 2006
i need a macro that will select all the blank cells in a column.
View 5 Replies
View Related
May 19, 2014
I've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
View 2 Replies
View Related
Jul 2, 2014
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies
View Related
May 7, 2009
I'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies
View Related
Jan 4, 2008
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies
View Related
Oct 14, 2008
I would like to select the visible cells, and then count down 50 rows in column A - is this possible?
View 9 Replies
View Related
Aug 19, 2009
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
View 9 Replies
View Related
Jul 13, 2012
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
View 3 Replies
View Related
Jul 19, 2009
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies
View Related
May 28, 2014
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
View 7 Replies
View Related
Mar 18, 2014
I have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
View 1 Replies
View Related
Mar 25, 2013
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies
View Related
Jul 24, 2014
I know that this could be a stupid question, but was wondering if it could be possible. I would like to select a column by a keyboard shortcut. If I would press a key combination adding the letter of a column as example F, it would select the whole column. I was trying to search for this in google, but no luck.
View 10 Replies
View Related
Jan 30, 2012
I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
View 6 Replies
View Related
May 27, 2014
In the attachment is a file, which allows me to specific a Column and hide. For Example enter "H" in the InputBox and Submit the Column "H" is hide.
What do i have to change in the code if i want to hide the "H" and the Column two columns next to "H". In this case "J".
HideColumn.xlsm
View 3 Replies
View Related
Feb 11, 2013
I have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
View 1 Replies
View Related
Apr 19, 2007
I seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
View 10 Replies
View Related
Jul 2, 2009
i am trying to select column A and column B and apply a filter. however, I don't want the filter to be applied to row 1...
View 2 Replies
View Related
Sep 5, 2009
I am trying to select a reference cell value from a column that is LESS THAN.
1. My reference cell value is 22.
2. I look at first row and since 22 < 30, I want to pick values in column 3 (30)
3. Question, how would I get the output below my reference output 22, like i have below?
View 2 Replies
View Related
Jul 21, 2008
I want the entire row and column of the active cell to be selected - now only column "A:A" gets selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
ActiveCell.EntireRow.Select
ActiveCell.EntireColumn.Select
End Sub
View 9 Replies
View Related
Mar 1, 2010
how can I just select every other (nth) column based on a selection?
So say I have data in columns A-G. I want to select the data block from A1-G100 and then run this macro so that it keeps just every other (or nth) column selected. So the process would be to highlight the data block, then run the macro and I would be left with the data block every other (nth) column selected so I could format all those cells the same way (column width adjustment so I can't use conditional formatting with =mod(),2).
To take it to another slightly more complicated step- I'd like to ultimately include a box that pops up and asks for how many columns I'd like in between.
So that I could select a data block, then hit a button for the macro, type in a 3 to indicate I want to select every 3rd column and then hit go, and then be left with excel having every 3rd column selected.
View 9 Replies
View Related
Apr 14, 2014
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies
View Related
Aug 15, 2014
I am using EXCEL VBA and SQL statement to try to select some data in worksheet
Below is my worksheet sample
datee name product_name product_code
2014/6/1 Eric Toy_A C0001
2014/6/3 Stephen Toy_B C0003
2014/6/16 Calvin Toy_C C0003
2014/6/19 Perry Toy_D C0001
2014/6/23 Calvin Toy_E C0002
Here is my code segment for select data
strQuery = "SELECT * FROM[List$] where promoter_name = 'Calvin' and promoter_code = 'C0003'"
Set rs = cn.Execute(strQuery)
This is success to select data with no error
============================
But when I changed the condition to use datee column
strQuery = "SELECT * FROM[List$] where promoter_name = 'Calvin' and datee = '2014/6/23'"
It cannot work The error message said data type incorrect
Do I need to set any thing before run the sql?
View 5 Replies
View Related
Jan 29, 2013
The first code is on the top of the module.
Code:
Private Const OPEN_TIME_COL = 3
Private Const CLOSE_TIME_COL = 4
Code:
RowNum = .Cells(.Rows.Count, CLOSE_TIME_COL).End(xlUp).Row + 1
.Cells(RowNum, CLOSE_TIME_COL).Value = Now
So according to the second code, it records the closing time(now), in the CLOSE_TIME_COL(Which is D)
in the next availabe cell, from the CLOSE_TIME_COL....
But here is the part i am trying to change
Code:
RowNum = .Cells(.Rows.Count, CLOSE_TIME_COL).End(xlUp).Row + 1
So that, what it should do is find the last cell used in column C, (OPEN_TIME_COL) and shift right.
if the last cell used in C is C1, CLOSE_TIME.Value should be in D1
for example somthing like this... but this code doesnt work
Code:
RowNum = .Cells(.Rows.Count, OPEN_TIME_COL).End(xlUp).column + 1
View 2 Replies
View Related
Sep 11, 2008
First although it returns the correct column, it always returns Row 1. Beyond me! Secondly I could really use some help in a line or two of code to select the cell at the intersection of the column and row.
Sub test()
Dim name As String
Dim number As String
Dim col As Integer
Dim row As Integer
Dim RowNumber As Integer
Dim ColNumber As Integer
Dim rng As Range
ActiveWorkbook.Sheets("Sheet1").Activate
name = InputBox("type a name from Column A")...........
View 9 Replies
View Related