In cells A71:A140 I have the following formula: =IF(A4"";A4;"").
How can I select only the cells in range A71:A140 where the formula has returned a value (number or text) and not the blank cells? When I try ctrl + shift + down arrow, all cells in the range are selected...
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies View RelatedIs there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
Please see attached.
What I would like to do is for each column within range("a1").currentregion that has dates, select the blanks in those columns and put the date 1/1/1900.
The result is in the Result sheet.
I know how to do a standard loop through columns but I'm not sure how to do this for just the current region and just for those columns with dates.
I have data that gets seperated into different cells and what i need is for all the data to line up from left to right with no empty cells in between.. so basically shift delete on each cell and shift the data left.
So i thought i know, ill simply f5, select the blanks, delete and shift left... however that option doesnt come up.. it simple says delete row?
What is the best way to select all the blanks in a range and delete them and have the cells that contain data move to the left so all data is next to each other.
I would like to select the last few cells in a column, however the number of rows is not fixed, it changes. This can only select the fifth last cell:
Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
Ultimately, i want to select the 5 cells from the fifth last to the last:
from this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(-5, 0).Select
to this: Sheets("ABC").Range( 'A1:A150').End(xlDown).Offset(0, 0).Select
If possible, with the cells selected, can i do something similar to this:
Range("B62:B67").Select
Selection.AutoFill Destination:=Range("B62:B114"), Type:=xlFillDefault
Range("B62:B114").Select
The underlined parts is the part which make me headache. How do i solve this?
I have found and selected the very last cell in a column (Say column A). What code do I select all the cells from A1 to that last cell?
View 4 Replies View RelatedI have a huge excel file (who doesn't ) and would like to create a macro to select cells between 2 blanc cells in a column. (Then another macro will continue to select all in the table for that specific range and copy-paste to another sheet. But this part is not relevant)
The details
The table will be like below.
So the macro should select between F2:F6. (then another macro will copy F6:A3 and cut-copy this range to another sheet); and when I re-run this macro this time it will copy the range of Model B..
A
B
C
D
E
F
[Code]...
[Code] .....
The above code works fine when I have information stored in multiple cells (C9, C10, C11, etc.). However, if I only have data stored in C9, my selection is expanded to the last row. I need a way to select all the data up to first empty cell even if the only cell containing data is C9.
i need a macro that will select all the blank cells in a column.
View 5 Replies View RelatedI've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedHow would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedI would like to select the visible cells, and then count down 50 rows in column A - is this possible?
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I have a spreadsheet with two columns - one with names, the other with values. In some cases, the values column alongside a name is blank. Is there a formula-driven method (not a pivot table) that could produce a separate list of only the names that have a value in the value column? The formula needs to be dynamic, not produced via a filter.
View 7 Replies View RelatedI am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
Would like to Condense Column Q to Col S no Blanks no Zero's
Tried formulas on net but won't work for me ? ?
I am trying to find a way to code to replace any cell that is not blank with the text "LOA", then after I replace all blanks with "Active"
The Replace blanks is easy:
Columns("K").Replace What:="", Replacement:="Active", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
but before this I dont really know how to quickly replace all non blank rows. Only way I know is to loop thru all cells in the column checking for not equal to "" then replacing, but the code above for replacing blanks is elegant, and only replaces in the used data section.
I have a colum of up to 5000 possible entries and I need to find the row number with last non blank value. If row 1 = 'A' , row 5 = 'B' and row 10 = 'C' with rows 2-4, 6-9 blank, I need a combination of functions to come to Row(10). The last value is not the largest and I can't use helper cells to get it into a sorted order.
View 4 Replies View RelatedI need a VBA code to do the following:
- The active cell i.e. the selected cell can be anywhere on row 11 (this is a merged cell with row 12 but I can unmerge if causes problems)
- The filter needs to be applied to the rows below the active cell (at most this will be about 10,000 rows below)
- I need to filter for non-blanks only
- Above row 11 there is one blank row and a number of filled rows; these need to be ignored i.e. excluded from the filter
- In this case I will need the filter to work on the cell with 'France Trade Product' in it
- The filter would need to hide rows below this cell except for row 16 where a non blank is found
FilterCapture.JPG
Is there a function to count blanks in a filtered column? That is, if I filter a column to show the rows that are blank, can I use the subtotal function (or some other) to count the number of blanks?
View 14 Replies View RelatedI have a group of data and I want to delete every blank row and the row directly below it and there could be multiple blank rows in the data group.
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
[code]....
I have some trouble to find a solution to sort blocks of data, the blocks have multiple headers and i would like to sort by the user column C.
I have attached a sample to easier understand my ramblings.
I have a spreadsheet where coloumn A contains either a blank cell, or a "X". There may be anywhere from 1 - 10,000+ "x"'s, spaced in col. a, but they are not spaced evenly, for example A1 may have an "X" A3,A4, A25, A28, etc... I need to find a way to merge the cells from the X to the row above the next "X" (so the X, and all blank spaces below it).
View 7 Replies View Related