Cycle Through Cells In Worksheet_Change Target Range Selection

May 26, 2009

I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.

View 2 Replies


ADVERTISEMENT

Worksheet_Change Event Wont Fire When Target Changed By ListBox Selection

Dec 5, 2008

Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then
'do something
End If
End Sub

Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.

But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.

View 4 Replies View Related

Worksheet_Change(ByVal Target As Range)

May 15, 2009

when I use worksheet_change for something so simple to do, it prevents me from deleting cells.

When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).

Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub

View 9 Replies View Related

Displaying Cell Values With Worksheet_Change By Value If Target Is In Certain Range

Nov 15, 2008

I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now

View 3 Replies View Related

Deleting / Clearing Multiple Cells In Target Range

Jun 2, 2014

I have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.

View 2 Replies View Related

Counting Rows/Columns In Selection Target

Sep 12, 2006

I have a data set with rows of data, with a header row along the top. I want to sort my rows of data by column when the cell above the appropriate column is pressed. I know this seems cumbersome - but it fits in with the sheet. The sheet is protected, and we only want the user to be able to sort in this fashion. My problem is, with my code, I get an error when you select a range of two of the header cells. The case selection on the target.column gets confused. How can I check to see if it's just one cell? Is there a property of a range that reflects how many rows or columns it contains? I tried the following (marked with the ' )just from picking out of the pop-up list of properties of the Target range in SelectionChange, but obviously it doesn't work. My original code is the un-'-ed code.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
' If Target.Rows = 1 And Target.Columns = 1 Then
If Target.Row = SortRow Then
Select Case Target.Column
Case PriorityColumn
SortData PriorityColumn
Case JobColumn
SortData JobColumn
Case NotesColumn
SortData NotesColumn
Case SupervisorColumn
SortData SupervisorColumn
Case ShutdownColumn
SortData ShutdownColumn............................

View 2 Replies View Related

Populate Range - Cycle Though Until Complete

May 11, 2007

I have a defined range "Values" within my worksheet, which have no content. Within an existing sheet formatting macro I'd like to force the user to enter values into the cells until all the cells in the range are populated. The values must be whole numbers.

I can get a simple msgbox to appear saying that the range must be populated, but can't add any data whilst this is displayed.

Ideally I'd like the message to be displayed all the time the range contains an empty value, enter the values in the background, then have the message disappear and the formatting macro continue when all the values are populated with correct data.

I reckon I need some kind of ‘loop’ procedure but could do with some pointers.

View 9 Replies View Related

Cycle Through Whole Numbers For Three Variables Whose Range I Can Define

Dec 1, 2006

I need it to cycle through whole numbers for three variables whose range I can define. I need this macro to test the result of all possible combinations of A, B and C, as is shown in the attached file. The initial range boundaries for each variable are as follows:

VariableABC
Minimum1408
Maximum510012

So the macro should start with the following combination (1,40,8) then (2,40,8) then (3,40,8) etc until it reaches (5,100,12). I need the results for each combination to be posted at a separate sheet next to the corresponding combination.

View 9 Replies View Related

Cycle Through Combining Cells

May 9, 2007

I want to combine cells from two adjacent columns in this way: a1 is combined with everything in column b, then a2 is combined with everything in column b, etc. So that I have a1b1, a1b2, a1b3, a1b4, a2b1, a2b2, a2b3, etc.

View 9 Replies View Related

Can A Worksheet_Change Range Permanently Adjusts Itself

Dec 15, 2008

Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?

Anyway, here is the code original

View 11 Replies View Related

Worksheet_Change Event With Named Range

Aug 17, 2006

Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("XYZ") Then
.....
End If
End Sub

The above script obviously doesn't work. The only thing I can get to work is:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
.....
End If
End Sub

I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.

View 6 Replies View Related

Range With (Center Across Selection) Cells In It

Jan 30, 2012

I am trying to use Range.Find in a named range that has some areas where two cells are merged using the format "Center Across Selection"

Set rngTemp = wbMaster.Range("PnLDateRow").Find(what:=dDate)

I get a run time error 438 "Object doesn't support this property or method"

Is it not possible to use this method to find the cell in this range? I tried iterating through the range but that errors also.

View 1 Replies View Related

Worksheet_Change Macro (run Any Time There Is A Change In Any Of The Cells On The Worksheet)

Jun 24, 2009

determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.

View 4 Replies View Related

Populate Cells Based On Date And Time Range Selection?

Mar 10, 2014

Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.

View 3 Replies View Related

Formula In Cell To Display No Of Cells In Selection (in A Range) Anywhere In Sheet

Feb 10, 2012

Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient

View 4 Replies View Related

Command For Target: Send A Target Link To A File

Sep 1, 2007

i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.

View 2 Replies View Related

Completing Range Of Cells Based On Data On Another Sheet Prompted By Dropdown Selection

Mar 23, 2014

First sheet has a client name and several cells of data along the same line. All of the data on this sheet is kept long term.

The second sheet is completed copied and deleted. In completing the second sheet the client name is selected of a drop down list and pulled from sheet one.

What I want to do and not sure if there is a way is that when I select a client and populate it on sheet two I would like the related data on that clients line from sheet one to populate to same named lines on sheet two.

if this is possible and if so provide a brief description of how it would work

View 3 Replies View Related

Target With Range Shorthand

Dec 17, 2007

Basically, I'm trying to do this:

View 11 Replies View Related

ByVal Target As Range

Aug 29, 2007

The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...

way I can adjust this code to stop it from continuously calculating? ...

View 9 Replies View Related

Ref Target Range Column To Sum

Sep 21, 2006

look at the attached workbook for an example of what i am trying to acheive and if possible modify or add another macro

in d7 i need a formula that equates to =C7-J7 where the column 'J' is known only by the 'TargetRange'.

Formula = "=c7-" & ccc & "7"

but what is required to reference the 'ccc' (TargetRange) column?

View 9 Replies View Related

ByVal Target As Range Code

Jan 16, 2008

This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A

How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?


Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub

View 9 Replies View Related

Select Range In Target.address

Feb 10, 2010

I have this simple requirement

Business ProcessBp1Bp2Bp3Bs. Consulting

The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...

for this i have written validation macro

If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then

do the validation;

end if;

this works fine, but i need to use or condition , is there any better way to write this, a more compact way,

View 9 Replies View Related

Percentage Of Points Within Range Of Target

Nov 4, 2006

I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.

View 4 Replies View Related

Match Description Which Might Be Because Of ByVal Target As Range

Oct 22, 2008

I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address

Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Worksheet
Dim shtChild As Worksheet
Dim lngRow As Long
Dim intCol As Integer
Dim strValue As String
Dim Target As Range
Dim rng As Range
Application.ScreenUpdating = True
Application.StatusBar = False
Set sht = Sh............

View 9 Replies View Related

Return True When Comparing Target To A Range In VB

Nov 12, 2003

Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
****
****'_____Works_____
****If Target.Address = "$B$2" Then
********Application.StatusBar = "To Be"
****Else
********Application.StatusBar = "Not to be"
****End If
****
****'_____This fails_____
****If Target Is Range("A1") Then
********Application.StatusBar = "A1 sauce anyone?"
********
****'____But this works_____
****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then
********Application.StatusBar = "¿Alguien quiere salsa A1?"
****End If

End Sub

Again - this is just me wondering why... Am I missing something terribly obvious here?

(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)

View 9 Replies View Related

Worksheet_change: Macro In One Worksheet To Run When Any Cell (in A Given Range)on A Different Worksheet (dataentry) Is Updated

Mar 27, 2007

I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub

If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then

On Error Resume Next
Application.EnableEvents = False

View 7 Replies View Related

Code To Target 2 Cells G10 And N536

Nov 27, 2008

I require the following part of the code to target 2 cells G10 and N536

i guess this is simple but just not sure how it will work

Case Target.Address = "$G$10"
If Not IsDate(Target.Value) Then Exit Sub
Dim DateSuffix As String
Select Case Day(Target.Value)
Case 1, 21, 31
DateSuffix = "st"
Case 2, 22
DateSuffix = "nd"
Case 3, 23
DateSuffix = "rd"
Case 4 To 30
DateSuffix = "th"
End Select
Application.EnableEvents = False
Target.Value = Format(Target.Value, "d") & DateSuffix & Format(Target.Value, " mmmm, yyyy")
Application.EnableEvents = True

End Select

View 9 Replies View Related

If Target Equals To 0 Then Delete Specific Cells On Same Row?

Mar 14, 2014

I'm Trying to write a code to delete Value in Column E & F If value in Column A = 0. (same row)

I've tried a few methods but none of them work.

View 2 Replies View Related

Worksheet Change Event For Multiple Target Cells?

Jan 20, 2014

I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.

Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?

Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.

Code:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then
Rows("5:5").Select

[Code]....

View 3 Replies View Related

Target.Cells Is Counting In Worksheet Change Event

Nov 6, 2006

Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?

Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
If Target.Address = "$A$1" Then
'Ensure target is a number before multiplying by 2
If IsNumeric(Target) Then
'Stop any possible runtime errors and halting code
On Error Resume Next
'Turn off ALL events so the Target * 2 does not _
put the code into a loop.
Application.EnableEvents = False
Target = Target * 2
'Turn events back on
Application.EnableEvents = True
'Allow run time errors again
On Error Goto 0
End If
End If
End Sub

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved