when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Cells.Count = 1 Then If Target.Column = 1 And Target.Value "" Then Range("b1").Value = Target.Value End If End If End Sub
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range) Dim sht As Worksheet Dim shtChild As Worksheet Dim lngRow As Long Dim intCol As Integer Dim strValue As String Dim Target As Range Dim rng As Range Application.ScreenUpdating = True Application.StatusBar = False Set sht = Sh............
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
Private Sub Worksheet_Change(ByVal Target As Range) If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then 'do something End If End Sub
Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.
But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = Range("XYZ") Then ..... End If End Sub
The above script obviously doesn't work. The only thing I can get to work is:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$A$1" Then ..... End If End Sub
I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) **** ****'_____Works_____ ****If Target.Address = "$B$2" Then ********Application.StatusBar = "To Be" ****Else ********Application.StatusBar = "Not to be" ****End If **** ****'_____This fails_____ ****If Target Is Range("A1") Then ********Application.StatusBar = "A1 sauce anyone?" ******** ****'____But this works_____ ****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then ********Application.StatusBar = "żAlguien quiere salsa A1?" ****End If
End Sub
Again - this is just me wondering why... Am I missing something terribly obvious here?
(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next Application.EnableEvents = False
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row. Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)
Can you have more then one worksheet_change event for the same worksheet and if not what is a work around. I have two that I want to use but only the first one works. Both work if they are the only one, but when they are both present the second one does not work.
I have a problem with the vba script attached. RoyUk very kindly helped me with this code a few weeks ago.
What I have is an example of some worksheets. I want the person to input into the first sheet their name & period and Y for whether they have checked the balance or not.
The problem I have is that if I fill in all those three details straight away it copies through wrightie, 5 and Y through all the pages. I don't want Y (balance check to copy through) as I need the user to manually input that.
It does work though if I put in wrightie, 5 and then check the other pages to see if it's copied through and then go back to the first sheet and put Y, it seems to work then.
I have two workbooks that have the following Private Sub Worksheet_Change(ByVal Target As Range) Dim myColor As Integer With Target If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub Select Case Month(.Value) Case 1: myColor = 3 Case 2: myColor = 17 Case 3: myColor = 19 Case 4: myColor = 22 Case 5: myColor = 26 Case 6: myColor = 33 Case 7: myColor = 36 Case 8: myColor = 38 Case 9: myColor = 40 Case 10: myColor = 42 Case 11: myColor = 44 Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question, Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.
Option Compare Text Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 12 Then Exit Sub
If Target.Value = "Daniel Amaya" Then Target.EntireRow.Cut Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert Target.EntireRow.Delete
I'm trying to find code (I can't write my own yet) that will highlight any cells that have been changed with fill color and bold font. I've searched around the forum and come up with the code below so far. It's not working - when I make a change to a cell and hit enter, it highlights and bolds the cell BELOW the one that changed!
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False With Selection.Font .Name = "Calibri" .FontStyle = "Bold" .Size = 11 .Strikethrough = False .Superscript = False .Subscript = False .OutlineFont = False .Shadow = False .Underline = xlUnderlineStyleNone .ThemeColor = xlThemeColorLight1 .TintAndShade = 0 .ThemeFont = xlThemeFontMinor End With
