In the attached file, i want to select the range from cell B8 (which is fixed), to used range i.e. till Cell F18 (but the problem is, cell F18 is not fixed). Last used row or column can change. I want to do it by using VBA.
Here is the sample file Select Range.xlsm
Range Macro - looking to create a simple macro to highlight a colum range from any location in column A that the cursor has landed on to the fixed location "A3". Example: If I am on A34, then the macro would highlight A34:A3. I can then edit the format in that range. Idealy, I could search on Column A first for a given text, then run the above macro to highlight every cell between that given text and "A3".
View 3 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I am still trying to develop a macro that will copy and paste a set of formulas into a dynamic destination range. I have included a worksheet that shows what I am trying to do. Basically when using AutoFill I need the columns of the destination range to be dynamic based on the number of rows in another sheet.
View 13 Replies View RelatedHow do I define a " Range Name" that is fixed? So if I insert a row above the range it has no effect on the orginal range.
IE: Range Name "MyRange" = A10:A100
I insert a new row at A4 then "MyRange" = A11:A101
I want it to stay at A10:A100.
How can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
View 4 Replies View RelatedSee attached the example worksheet. I am wondering if there is a way to write a macro that will change data from individual strings within a cell row to merged and centre data for that set of data. The issue is the data in the row will be varied i.e. sometimes there will be 20 x 2013 other times there may be 22 X 2013 etc. however, the data will always be fixed in the same row on the worksheet.
At the moment the best I have is a recorded macro, which really doesn't work too great and I end up fixing it constantly.
The code below is part of a larger script which I'm having difficulties in amending.
[Code]....
In it's current form, this row.
selects cell C7 and expands the range until the cell is blank.
I'd now like to amend this so that I can select the first cell in the range within an offset rather than C7
I can set the offset within the script as below, but I'm a little unsure how to select the first cell in the range.
I need a code to select the last cell which is having value in the range of A1:a200. if I use below, it is selecting cell beyond a200.
lr = Sheets(1).Range("A" & Rows.Count).End(xlUp).Row
how to select a cell in opposite (i.e right side of a range) while using a macro. My macro selects a certain range based on user input. The active cell is the left most upper cell. I need to move the active cell within the range to the right upper most cell. I tried the short cut key - tab, while recording a macro, but the macro just selcted a that certain cell.
View 4 Replies View RelatedI am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
I have a worksheet with a block of data. The size of this block changes.
I am calculating and storing the upperleft and lower right cell position of the block in say cells AA3 and AB3 on the same worksheet.
So far I have everything working fine.
Now I want to create a button to trigger a macro to sort that block.
I can figure out the button and make it trigger a macro.
One of the lines in the macro is
I am trying to select range of unlocked cells and clear it's contents? How can i do that?
Right now I have a code to select ALL cells.
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
View 2 Replies View Relatedi need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
Is it possible, through VBA, to select the top right cell in a non-contiguous range? For example, I have defined A1, A3, and A5 as a range. How could I tell Excel to select A5 from within that range?
I am using Excel 2007.
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedI’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI have a column with rows from 41:254, the first cell contains a word, and the next is blank, and this repeats the whole way down.
a previous macro i run changes one of the cells in the range (one of the ones containing a word) to a number value, i want to write a further macro to select this cell that has now changed. when it changes it will be the only cell in the range with a number in.
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View RelatedI'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
I need to change multiple conditional formats which apply to cell ranges 1 row x 17 columns wide. The specific change I am making is able to be acrried out with the code
With Selection.FormatConditions(1).Font
.ColorIndex = xlAutomatic
End With
However, I dont want the user to have to manually select each 17 cell area. I WANT THE USER TO JUST MANUALLY SELECT THE FIRST OF THE 17 CELL AREA. I want to write a macro that will THEN select a row of cells, 17 cells long, from the MANUALLY SELECTED position as at the moment of running the macro. Unfortunately the cells are not always on the same row in each sheet. On one sheet they may be on row 5, on another row 8 and on another, row 15 etc. I was wanting to be able to select a 17 cell range 'relative' to where the cursor is. How do I write the code to select the relative cell range? Is there an answer in an R[1]C[1]:R[1]C[17] sort of code?
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies View Related