I need of some way to capture a screen shot of a program on screen and send it to a specified email address at a certain time of the day. I would not think its impossible, could it be done using vba code?
View 10 RepliesI am trying to write a macro to compose an email in outlook without sending it. Ideally the macro would compose the email and the email would be left open for me to inspect before sending. Below are the details.
Column A contains the addresses
Column B contains the CC addresses
Cell C2 contains the message
I can change where the above info is located/arranged if need be.
My spreadsheet automatically generates the email addresses, which are dynamic. For control purposes my employer does not want me to have the email automatically sent, being the reason for me to want to inspect the email before sending it.
i have the following code in my Excel worksheet. This code successfully send out email to our customers when if the criteria is true. I have tested this at home and it works perfectly as I use Outlook at home. However when I take this code to work I couldn't get this working as at work we use Outlook 365 and we use web Outlook, OWA.
Is there a setting I can specify to use OWA as I don't think I am allowed to install outlook at work.
[Code] .....
I have an excel spreadsheet of 500 users which contains these details:
A1 = Email Address
B1 = Mobile Number
C1 = User Name
D1 = Department
E1 = Manager
F1 = Handset
What i am after is something which will let me be able to use outlook to email each user their own details. So the "TO" filed in outlook to be A1 Email Address
Subject to be - Company Mobile Phones Then in the body of the email to have the users details, so something like.
Mobile Number - 0123456789
User Name - Stewart Layzell
Department - IT
Manager - The Boss
Handset - Iphone
Is there a way to include my Outlook email signature when using the following macro to send an email?
Code:
Sub EmailReport()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
Determining the problem with my settings for the failure of this line of code executing.
Set OutlookApp = New Outlook.Application
I was expecting the statement to create a new outlook instance, but got this message
Run-time error '-2147319779 (8002801d)':
Automation error Library not registered.
I've seen a few posts recently asking about sending either sending a range or a worksheet in an Outlook email as the body of the message through code. I've been looking at this and think I've come up with something that might work. I'd appreciate it if any of you XL kings and queens would take a look and see if the code works OK on your machine. I've sent a few messages to myself (sad I know ) and they seem to work well.
Here's the code. You need to set a reference to the Outlook object Library AND the Microsoft Scripting Runtime in order for this code to work.
Option Explicit
Sub SendRange()
'Sends a specified range in an Outlook message and retains Excel formatting
'Code written by Daniel Klann 2002
'References needed :
'Microsoft Outlook Object Library
'Microsoft Scripting Runtime...........
I have an excel sheet on which to address, cc address, subject , attachement location and file name is mapped. Can some one help me out but executing the macro it will pick the file from the location and send to the Recipient with cc and subject and attach the file accordingly. The excel sheet is attached for your reference.
View 3 Replies View RelatedI need to send 25 mails on daily basis to my client. All fields in mail are common except recipient and attachments. Every mail has 3 excel attchments. So i created a macro in excel which sends mail as per my requirement but picks up only one attachment from the path i have mentioned in the vb code. Whole macro is running perfectly. I just want to know what modification i should do in that code to attach more than one excel file to the mail from the path i have given. Below is the code:
Sub macro1()
Dim sFolder As String
Dim Folder As Object
Dim file As Object
Dim fso As Object
[Code]....
I am trying to send outlook E-mail messages from excel but at the last I am receiving allow and deny message...How can I avoid this message.
Sub Button2_Click()
'Microsoft outlook 14.0 object lib (library name)
Dim olapp As Object
Dim msg As Outlook.MailItem
Set olapp = Outlook.Application
[Code] ..........
I find out a code to create a PDF (with opening the Save As dialog box) from an active worksheet, but I can't find out how to send this PDF by e-mail (Outlook). The code is working till the words 'Set OutApp'.
Just what I want is to send the active worksheet as PDF (as attachment) by email (Outlook). Here the present code.
Code:
Sub SendPDF()
'
' SendPDF Macro
'
Dim OutApp As Object
Dim OutMail As Object
Dim v As Variant
v = Application.GetSaveAsFilename(Range("E2").Value, "PDF Files (*.pdf), *.pdf")
[code]....
I have created a spreadsheet that displays new dates in column D based on provided dates in Column B and recurrence intervals selected in column C. The dates in column D are when a training deadline occurs. I have been trying to get a macros written so that when a cell in column d is updated, an outlook appointment message is sent to the person doing the updating. The idea here is that anyone can use this without future coding (so their address would be placed in cell say A1)
So far all i have gotten is excel to send an email to me with the excel spreadsheet as an attachment, not really what I want. Again, I dont want somethign specific to my computer settings, I want to be able to send the spreadsheet out with simple instructions for the user to change their email in cell A1 and then every time a cell changes in column D, it automatically generate an appointment reminder for the new date.
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies View RelatedI am using the code below that I got off of these forums to email a particular sheet in my workbook, but I need to strip all of the VBA code and the command button from the sheet being sent.
View 14 Replies View RelatedI am trying to get this to sort out to a new workbook instead of a worksheet. There are only two components in C column, so there should only be 2 new workbooks created. I am a little unfamiliar with the terminology for the workbooks.
View 4 Replies View RelatedHere's a screenshot of my worksheet in Excel 2007:
What I would like to do, is highlight the row in the table for the current week, and then match the names from that row to the phone list.
I am trying to use the AVERAGEIF function on the below screenshot. I have a mix of text cells (ignored by default), 0s, and whole numbers from 25-100. For some reason, the value in Q16 is incorrectly averaged. The interesting thing is, I have similar data and function in R16 and it is working as expected.
Q16 =AVERAGEIF(B16:B16:D16:D16:F16:F16:H16:H16:J16:J16:L16:L16:N16:N16,">0") --> expected value of 275/3 (decimal rounding 0 places) is 92[code]....
below is the code i use to create a lotus note email.
i would like it to display my email and send it manually instead of sending out automatically.
' Open and locate current LOTUS NOTES User
Set Session = CreateObject("Notes.NotesSession")
UserName = Session.UserName
[Code].....
Please check this sample file. Say for example; I am sending this file via mail to different agencies. See in this file sheet named base & column title Agency , filters concerned agency wise and send via outlook to the concerned agencies mail id from mailinfo sheet. What my concern is since these are different agencies, I wanted to bring the agency name in the mail subject.
Link below:- [URL] ............
I am using Microsoft outlook to get my all official emails. I have lot many emails in outlook express & there are some common things which i want to get in an excel sheet. Details of data are as under.
Column A Column B
1) Company Name Xyz Ltd.
2) Sales 1500$
3) Commission 150$
4) Total Sales 2500$
how can i get particular these data from outlook express to excel sheet ?
i was able to setup a email code, which will automatically extract the unique row reference data and sends the email. However, i am struggling to add couple of things, i searched most of the web portals .. wasn't lucky.
1. while email drafting i need to use the data from Column B onwards
2. i need to insert the default email signature during email draft ...
I need to send a mail on a daily basis from outlook at 6.00 pm.
Containing a shared link to particular mail I'd.
I have the following code from Ron De Bruin's website (http://www.rondebruin.nl/mail/folder3/message.htm) for emailing a small message from a range.
View 14 Replies View RelatedGetting attachments from outlook subfolders.
My attachments are in Inbox > First subfolder (sales) > second subfolder(Sales 1)
I need to save attachments from second subfolder (Sales 1) to my drive.
Currently i got macro which picks up attachments from first subfolder (Sales). The macro code is
Sub SaveAttachmentsToFolder()
On Error GoTo SaveAttachmentsToFolder_err
Dim ns As NameSpace
Dim Inbox As MAPIFolder
Dim SubFolder As MAPIFolder
[Code] ...........
when sending an email in code from Excel through Outlook, the following Microsoft Office Outlook dialog appears during code execution in Office releases since 2002:
A Program is trying to automatically send e-mail on your behalf.
Do you want to allow this?
If this is unexpected, it may be a virus and you should choose "No".
Two buttons: [Yes] [No]
Question
Has anyone used or developed code that bypasses this prompt, and if so, would you please post an example of your code here. What I would like is a macro in VBA and / or API that you know from your own first-hand experience has worked for you, that emails an Excel attachment from Excel, using Outlook (not Outlook Express) as the email client, which bypasses the above prompt.....................
I want to search for a specific text in body of an outlook mail attachment,I am able to search for the string in the body of the mail,I also get mails with mail as an attachment i want to search for the string in the attachment as well.
View 6 Replies View RelatedMy company recently upgraded everyone to Microsoft 2010 from 2007 version. I have no substantial VBA skill and left with a VBA code which is supposed to extract a list of outlook emails sitting in a shared mailbox into Excel.
I was using that VBA code in Outlook 2007 and it worked fine but shows the following error when run in Outlook 2010: 'Run-time error '-2147221233 (8004010f)': The attempted operation failed. An object could not be found. Here is part of the code:
[Code] .....
It worked after one of the members suggested to "click on any line of this code and press F8 repeatedly until the yellow focus moves to the error line, don't press F8 anymore. Now in immediate window, copy paste each of below lines, press enter after each line. Let us know where the error occur." However, it stop working the next day.
? olNS.Folders("Mailbox - Market Intelligence").Folders.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Items.Count
? olNS.Folders("Mailbox - Market Intelligence").Folders("Inbox").Folders("MI").Items.Count
the code always opens a new instance of Outlook even though one may already be open. If left unchecked I may have like 30 instances open if I leave the computer for a few hours. So I was wondering is there some snippet of code I can add in here to check if excel is open first and if so do not open a new instance?
Code:
Dim OutApp As Object
Dim OutMail As Object
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
' Change the mail address and subject in the macro before you run it.
With OutMail
.To = "xxxx@live.com"
[code].....
I need to send through VBA emails to GMAIL accounts.
The code below is the shortest I've encountered. It returns:
"The "SendUsing" configuration value is invalid"
[Code].....
I have an excel sheet that our sales staff enters data on and I'm wondering if there is a way to send an E-Mail to certain people if they answer yes in cell S44? I want this to send an E-Mail telling the intended person that they need to perform a "First Article Inspection" on an item that sales has just finished with. The excel is 2003 and everything runs through our network.
View 9 Replies View Related