Separately Printing Multiple Tables From A Single Sheet
Mar 24, 2013
many times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.
However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.
So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I'am trying to create a document which automatically prints the next page on the same sheet.
I have created a spread sheet which prints the first 5 rows in the top of every page, but I can't figure out how to make excel print two A4's on one A3 side-by-side.
I have an issue with printing a worksheet with a pivot table. When refreshing the table, depending on the filter choices, the table length with expand and contract. When the pivot table contracts, it leaves a light blue shaded area. If you try to print the worksheet it includes the blue section. Is there a print macro that can be written that will only print the sections with values or perhaps a print setting that would exclude the shaded area?
I have 199 tabs in which i have, for example, sales data month by month. I want to consolidate into one tab the total sales per tab. I.e. so that i have a list of tabs 1 to 199 with the sales for the year for each tab. I don't want to sum the same cell across each tab.
Is there a way of doing this without having to do 'sum(tab1...)' for my tab 1 sales and then 'sum(tab2...)' for my tab 2 sales etc?
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well. - once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table. - once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table. - once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table. - and so on, the same with other 3 remains sheet.
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6. this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have B6=OFFSET(Data!$A$1,A6,1) B7=OFFSET(Data!$A$1,A6,2) B8=OFFSET(Data!$A$1,A6,3) and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats" 2, it comes up with multile .. irrelevent results.
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
I have a worksheet that contains multiple task lists, each having two columns, a "Priority" field and a "Description" field. The data should be sorted by Priority first and by Description second. The header row is 5 and the data is in rows 6 through 50. The first list is in A5:B50, the second C5:D50, and so on until the sixth list in K5:L50. I have a macro that works for one task list, but cannot get it to function for multiple task lists. Below is the macro that functions for the first task list. It is in the code for the sheet tab.
Option Explicit Private Sub Worksheet_Change(ByVal Target1 As Range) If Target1.Column = 1 Then
I've workbook contain Sheets 2716 having same column heading data in each sheet in 1st Row, also having some columns blank in between these heading so can you give me solution on it on the basis of column heading names below data in single sheet of all these sheets data.
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code: Sub Auto_Open() ' Dim sht As Worksheet If Range("A1") = 1 Then
The code below enables entire workbook protect/unprotect, however ultimately it refreshes a particular sheet (sheet 8 in this instance) when the relevant data table is edited.
I have 7 sheets (one is the data table and the other 6 house pivots that work off this data table). What I want to happen is for the code to enable the unprotect, refresh and protect of all the sheets exactly like it does for the current sheet 8 (I am simply new to this an am unsure of how to write the code to make the refresh happen for all sheets).
[Code] .....
I have inserted the following code in the 'ThisWorkbook' section to allow for to sheet protection macro to work:
[Code] ......
Along with the following code in the sheet 8 section to enable the refresh macro to work:
I can find tons of examples to merge many worbooks into one workbook(retaining all sheets) but I would like to merge to one continuous sheet.
example:
Folder c:excel containes 5-10 workbooks. Merge sheet2 of all workbooks in that directory to sheet1 of new workbook.
All sheet2's have same name of "Sheet2" and all have same fields. Also there are no blank rows but each contains different # of rows and plz dont say JFGI (just __ google it) I have been.
Can a single(or multiple) column be shown on sheet but not printed? I have a list with a bunch of vlookups in column C-H, a numbered column in A, the code used for the vlookup in B. I do not want to print the code(column B) but do want to print A,C-H. I do need to see the column B in sheet. How do I do this?
I am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
I have a My.xlsx file that has data for single month and I want to make a single file in which I can have contents for whole year by copying this file 11 more times in the same excel work book. Finally I would have 12 sheet in a single workbook.
E.g. Jan-14, Feb-14, .... ,Dec-14
I don't need any calender data just 11 more copies of my original sheet in a single work book.
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows: copy 250 rows to tab "450" copy 250 rows to tab "360" copy 200 rows to tab "777" copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
I have a data set where the rows contain monthly sales data (from January to December) and the columns contain the names of employees (joe, bob, sue, etc.) and a single "group average" column:
I would like to create a chart for each employee showing the employee's monthly sales vs. group average. For example, the first chart would be for joe...
Then the next chart will be for bob and so forth...
The above is sample data and the rows will change depending on data. Based on email id the range should be picked up and the email should be send as a attchment.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
This is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
I have a workbook that has a single sheet in it, in cell G2 I want to insert a page number where if I print of multiple copies on the first sheet it will say 1, the second 2, the third 3 and so on and so forth.
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
I have a worksheet with two distinctly different tables of data. Is it possible to apply autofiltering to a column in both tables? Applying to one is fine but when I try to apply a filter to the second table the filter on the first one is canceled. Aligning the tables so that the same column in both tables is the filtered column is not possible with the worksheet setup.
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
