Distribute Data In Single Sheet To Multiple Sheets
Sep 23, 2009
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows:
copy 250 rows to tab "450"
copy 250 rows to tab "360"
copy 200 rows to tab "777"
copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
View 5 Replies
ADVERTISEMENT
Feb 5, 2008
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies
View Related
Jan 23, 2009
I recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
View 5 Replies
View Related
Jun 4, 2009
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
View 9 Replies
View Related
Aug 14, 2014
Following is my query:
There are two workbooks , Workbook1 and Workbook2
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
View 1 Replies
View Related
Feb 6, 2012
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
View 9 Replies
View Related
Feb 4, 2014
I am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
View 6 Replies
View Related
Aug 11, 2012
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
View 3 Replies
View Related
Aug 16, 2013
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
View 9 Replies
View Related
Sep 21, 2009
I'm loving these new formulas that i'm learning here and applying them to whatever sheets i come across to make my life easier at work...
So now i've created another worksheet, this one is to help my colleague who wastes atleast an hour everyday to generate a consolidated report of our bank accounts...
Now i've sorted out half of the report where he can give an overview of the position of cash flow on a daily basis.
Theres however 1 more addition i wanted to make to make this workbook absolutely perfect!
On sheet 2 (which is my consolidated report sheet) I want to add all the transactions that occur on a particular date from all the different bank accounts (Each account having a seperate worksheet)
I'm not sure if advanced filters can achieve this or not or even easier/short macros... Any tips/hints as to how i can achieve this would be awsome..
I've attached a sample workbook which has sheet1 for a bank account and sheet2 for report generation...
I want to add all the rows having "Clearing date" (column A) in Sheet1 to report date in Sheet2
..And this for all the account sheets i can add...
View 10 Replies
View Related
Dec 28, 2011
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
View 8 Replies
View Related
Feb 1, 2009
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column.
Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
View 9 Replies
View Related
Jun 19, 2014
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies
View Related
Jan 24, 2014
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
View 14 Replies
View Related
Feb 8, 2014
I've workbook contain Sheets 2716 having same column heading data in each sheet in 1st Row, also having some columns blank in between these heading so can you give me solution on it on the basis of column heading names below data in single sheet of all these sheets data.
Heading names as below
Product Name
Amount
sr no
DS
TS
Description
Qty
View 8 Replies
View Related
May 3, 2007
I have an excel file having different columns. The test data is as under
Email HQ City Product Value
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
The above is sample data and the rows will change depending on data.
Based on email id the range should be picked up and the email should be send as a attchment.
View 9 Replies
View Related
Feb 5, 2014
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
View 5 Replies
View Related
Dec 17, 2013
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
View 2 Replies
View Related
Aug 14, 2014
Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.
I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.
The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.
My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.
For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).
[Code] ......
I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.
I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.
data_extraction2.xls
View 7 Replies
View Related
Feb 13, 2009
I am creating a spreadsheet for mutiple clients, which has around 5 columns. This spreadsheet will have 7 sheets on it. 1 sheet for each client, and the 7th will be to display all of the information together.
Basically I am looking to find out if this is possible?
I will try and explain a bit more, as above is just beifly what I am loking for.
I Have Client.xls
On my Tabs I have
Client1, Client2, Client3, Client4, Client5, Client6, All Clients
In Each individual spreadsheet, I have the following Columns
Incident Reference; Description; PMDB number
Each Day data will be entered into each client sheet, and I would like this information to be populated into the All Clients Tab. I am not sure if this is possible, and if it is, would I then be able to put it into the All Clients tab, and have it auto sort by the incdient reference column? As this is an autogenerated reference for all of our clients.
View 9 Replies
View Related
Aug 24, 2013
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
View 8 Replies
View Related
Jun 16, 2014
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
View 6 Replies
View Related
Jul 29, 2014
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
View 14 Replies
View Related
Nov 3, 2008
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies
View Related
Dec 16, 2011
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
View 3 Replies
View Related
Mar 8, 2013
Currently I have 15 Prepaid schedule sheets that get pulled together as lines in a detail sheet. The way I have the detail sheet set up currently is that I have designated 200 rows for each prepaid schedule sheet, and then I manually changed the sheet reference in the formulas every 200 lines or so, for each prepaid schedule account. One such formula looks like this:
=IF(OR(H11="",H11=0),"",IF(OR(LEFT('Prepaid Gnrl Ins'!A11,8)="Balances",'Prepaid Gnrl Ins'!A11="Variance"),"",CONCATENATE('Prepaid Gnrl Ins'!A11," - ",'Prepaid Gnrl Ins'!B11," - For month ending ",TEXT(Menu!$I$4,"mm/dd/yy"))))
The result of that formula is this: Beecher Carlson - 11/1/11 - 4/1/13 - For month ending 02/28/2013
The detail sheet also includes a formula to find values to be expensed. that formula is:
=IFERROR(IF(HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE)=0,"",IF(F11="","",HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE))),"")
I'm trying to shrink down the over all size of this detail sheet and I would like to be able to write code with the syntax:
IF {HLOOKUP of value in menu sheet, find in column 10 of active sheet and offset by 1 (row 11)} contains a value THEN run all formulas (examples above) and paste into detail page UNTIL value in column A contains "Balances".
After finding the word "Balances" the macro would move on to the next prepaid sheet and do the same thing.
View 1 Replies
View Related
Sep 26, 2013
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
View 8 Replies
View Related
Oct 10, 2013
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
View 1 Replies
View Related
Apr 24, 2008
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
View 9 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
