I have a worksheet with two distinctly different tables of data. Is it possible to apply autofiltering to a column in both tables? Applying to one is fine but when I try to apply a filter to the second table the filter on the first one is canceled.
Aligning the tables so that the same column in both tables is the filtered column is not possible with the worksheet setup.
I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.
However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.
So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.
i have a pivot table report filter that i cannot sort a-z. i've tried sorting the source data and also right clicking on the first value then choosing display a-z - neither work.
View 5 Replies View Relatedmany times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
View 9 Replies View RelatedI want to create multiple pivot tables each performing its own tasks. When i want to filter a particular category in all first pivot tables i have to do this one by one.
This is time consuming and i think it can be done faster. Is it possible when i filter a category in pivot table 1 that this filter is automatically filtered in the other pivot tables?
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies View RelatedI am trying to update multiple pivot tables from different OLAP cubes based on the same cell value that an user defines,
namely one country for which he/she wants the create the report for. The code I recorded goes like this:
VB:
Sub TUR()
Sheets("Pivot").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
ClearAllFilters
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
CurrentPageName = "[Geography].&[TUR]"
End Sub
In this example, TUR stands for Turkey.
Basically, I have over 20 countries and at least 3 different OLAP cube-based pivot tables in my report, I can do it with 3 x 20 different macros but that seems like taking the long way.
I have a table that contains all my data and would like to filter it by company into their own tables that will stay up to date with the main table and then hopefully somehow calculate their investment returns (future stage). I thought Microsoft Query would work but I came across a problem see my other post MS Query returning data to excel some columns I cant sum looks like text
Excel 2010
By using this function I have managed to do a 1000 sheet report, 1 for every customer.
However, my problem is that I don't know a way of globally setting the print area for every single sheet.
Also, the reports are not exactly the same size, they will vary from 5 to 12 columns.
I am using a pivot table to explore the relationship between the two variables in a survey. Question 1 is a "choose all that apply" question, while Question 2 is more "if you said yes to any in question 1, choose all that apply".
So, I have about 10 filters for question 1, where each combination will give me a different number for the responses for question 2. My question is this: How do I get excel to automatically find the # of individuals with the particular combination of filters in question 1?
Ie. if said yes to 3/10 options in question 1, how do I get excel to find out how many actually said yes to the 3/10 questions.
The purpose of this data is for reference to question #2, so that i can utilize some percentages.
I need to count the unique items in a range that don't contain the string "option". I would like not to use VBA for that but I can't make it work with a simple formula.
For now, I have :
[Code] ......
That doesn't count the cell with the content "option" and count correctly the other unique items. However I need to ignore any cell that contains the string "option" (with wildcards).
I have a spreadsheet with multiple columns. The first column defines a "route", and the next two list "start" and "end" cities for that route. The fourth column lists the length of each route. There are only a limited number of cities, so the same entries appear in both "start" and "end" several times. I would like to use Autofilter to sort the list for every appearance of a given entry in either "start" or "end". Is there a way to make Autofilter sort mutiple columns simultaneously?
I could achieve the desired end result with Advanced Filter, but I want something with the ease-of-use and immediate update/response of Autofilter. Advanced Filter requires explanation (as well as lots of clicking and typing) whereas Autofilter is self-evident. I also want to avoid VBA Macros as they are not well-understood by the users who will use this spreadsheet (and any VBA Macro will require very specific input to work properly.) Is it possible to do what I want? Or is Advanced Filter / VBA the only way to do it?
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
I have a workbook with a lot of commercialy sensitive data. I have created various pivot tables from that data which I want to copy to a new workbook without retaining the link to the original data, so I can send it to a number of suppliers.
View 8 Replies View Relatedin finding duplication within different worksheet tables using excel VBA.
Sheet 1 has the following table below:
A
B
C
D
E
F
G
[Code]..
The format of both tables is different within both of the sheets.
The desired output should be shown in sheet 2 table:
A
B
C
D
E
F
G
[Code]..
The above table (sheet 2) shows duplicate rows (bold) from comparing table in sheet 1.
I was using this function below, however this does not give me the desired output i am looking for.
=IF(AND($F2=Sheet1!$F2,$H2=Sheet1!$H2,$E2=Sheet1!$E2,$G2=Sheet1!$G2),Sheet1!I1,"").
The shared worksheet resides on a secure network drive, so I can access it from anywhere. For years, I've had my secretary cut and paste out separate reports on individual salesman booking/commission performance. I thought taking advantage of Excel's native Pivot Table features, would save an awful lot of work, and probably lessen the chance of errors. Then I discovered that Pivot tables don't work with shared workbooks.
So I tried un-sharing the file. I discovered that the Pivot tables worked fine, but that I had to
re-create them ( seven sales guys, 4 independent geographical territories) each reporting period. The Pivot tables weren't dynamically updated each time additional orders were added to the main list (entry worksheet). I was very careful in laying out a new version of the "entry worksheet", and eliminating any unecessary column and rows. My immediate thought is that for the Pivot tables to work dynamically, I have to have dynamic ranges in the entry worksheet.
I have a dashboard that I created that is driven off one source of data. I have several lists and pivots created from that single source. I have two cells that are driven off of lists that then drive the pivot table. When a user selects an item from the drop down list I would like the pivot table to update. I have two tables like this on the main dashboard. Once the user selects the first data point, the table refreshs as does the second drop down list. After they select the second data point, the second privot table will refesh. Manually everything works prefectly, but when I attempt to automate it with VBA, it will only update the initial pivot and the secondary list, but not the second pivot.
I have posted the current code below.
"SelDept1" and "Wave" are the two cells that contain the drop down lists.
Private Sub Worksheet_Change(ByVal Target As Range)
Application. ScreenUpdating = False
Sheet4. Unprotect "lcssdi"
Sheet2.Unprotect "lcssdi"
If Target.Address = Range("SelDept1").Address Then
Me.PivotTables(1).PivotCache.Refresh
End If
I need, I do not know Visual Basic, so I need something in simple Excel format that I can use before I am able to take the training (upon reading more threads, looks like VBA is just the editor used to create a macro where I can copy and paste in code text from your suggestions? I think I can handle that).
I need to condense multiple tables into one master table, and then perform calculations on those entries. Each table contains three columns, but after being manually pasted -- as I am doing currently -- into the condensed worksheet, there'll be two or three additional columns based on calculations from the entries. The Workbook does currently contain 2 worksheets that do not contain data in this format, so please share code that could exclude those? I am fine with every so often manually applying a formula on the last worksheet that says something like,
look in SH1 A2:C300. If entire row is not blank copy over contents, if blank move on to SH2, etc etc. Since I'm a newbie I imagine there are much more efficient ways to do this. I may be a little shaky on the VBA but surely I can copy and paste.
The first sheet is the row data given to me, the second one is where I want my data to be analysed automatically by macros.
I managed to create a pivot table manually to give me the info I want but then I still have to copy all the results from the pivot table sheet to my analysis sheet.
How can I create a macro able to do all that by it self? I tried to record a macro using the recorder but then when I try to play it it gives me an error straight at the beginning in the definition of the pivot table I think.
An example of what I want the pivot table to do is:
in the first sheet, go in the small table in column K and L, take the value of L1, then in the row data in column A to J, in column C look for the value in L1, once found, look for the value 1 in column J then do the average on the values in column E and put the result in my second sheet in cell F5
then do the same but look for 2 in column J and put it in F8, then 3 in F11, ... until 7 found (the data is in ss.000 and so the results in the second sheet should be formated the same way)
then do the same all over again for value in L2
etc etc etc
this should be done for the 6 values in column L, each having values up to 7 in the J column.
Then I need to do the same for other columns and not only averages but minimums as well but I can adapt the code I think.
I am trying to take multiple tables from a Word document and import them into an Excel worksheet. Currently I have found two versions that when combined, could yield what I am looking for. The first one imports the table's data from Word, but does not maintain formatting of the table (font, colors, rows/columns etc.):
The next code maintains formatting, but only imports/pastes one table:
[Code] .........
For the second one, I do not like the fact that it is calling a specific Workbook to paste into. If I could somehow maintain the ability to import/past multiple tables while keeping formatting that would be perfect. An extra bonus would be to import each table within the Word document into individual Worksheets in Excel. I am also using Office 2010.
References: [URL] .........
VBA - How to preserve source formatting while copying data from word table to excel sheet using VB macro? - Stack Overflow
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
I have a excel spreadsheet database that I do data entry on, and I do all kinds of filters for all kinds of situation.
I report everything from pass discharge dates, pass deadlines dates. So of them I would have to filter anywhere from one cell up to three or four more other cell. Insted of having to remeber which cells I have to filter every time I need to print a report.
I do have a status or stat sheet, but as you know this only report # or %... Is there away that I can display on a diffrent worksheet the same view as if I was to filter the first sheet that I work off? Most of the time I need to see names and dates of these entry to display.
how to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
How do I change the print settings of individual pages within a worksheet. Specifically, I'd like my worksheet to print out 4 pages, the first as portrait and the remaining as landscape.
View 2 Replies View RelatedI need a code to be applied to a VB button that will email out a selected worksheet within the workbook, lets say i need to email out sheet5. Is it possible when the button is clicked to bring up my email client, (it's not Outlook) with the file already attached so i just need to add the email address/adresses?
View 9 Replies View RelatedIs there a way that I can set a single worksheet in a workbook to always be on manual calculation, but keep all other sheet in the workbook set to automatic?
I want to be able to open the workbook, any calculations to perform automatically and then i will select the 'manual' sheet and perform these calculations manually. I also need to these settings to always apply each time i open the workbook.
I've finally figured out the correct code to allow multiple selections from one of my drop down lists. Now, when I try selecting an item from a separate list (which I only want to be able to choose one thing), it's accepting multiple items. How do I have both working properly?
This is the code I have for my multiple selection list (which is only in column M):
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
Dim newVal As String
If Target.Count > 1 Then GoTo exitHandler
On Error Resume Next
[code]...
I have a worksheet in excel that has financial data for several departments and schools. The data is across 2 columns and 948 rows. I need to break the data down into multiple workbooks so I can use and existing email macro to send them to managers. There is a unique character that separates the data and I was able to use a previously written macro to enter page breaks which is below, but I'm having trouble using the same unique character (or page break) to put the data into separate workbooks.
Dim PBRange As Range, PB As Range
With ActiveSheet
Set PBRange = .Range("A1:A1000")
For Each PB In PBRange
If PB.Value = "***********" Then
.HPageBreaks.Add before:=PB
End If
Next
End With