Can a single(or multiple) column be shown on sheet but not printed? I have a list with a bunch of vlookups in column C-H, a numbered column in A, the code used for the vlookup in B. I do not want to print the code(column B) but do want to print A,C-H. I do need to see the column B in sheet. How do I do this?
View 2 RepliesThe col B is a list and col A is a list of Col B + some other. My requirement is to find col C which does not contain the terms that are not mentioned in col B. ie: A-B to give C. I am attaching sheet for your use.
View 2 Replies View Relatedmany times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
View 9 Replies View RelatedI have the following formula.
=SUMIF(hfx!A:A,"123456789",hfx!J:J)
very simple.
for the totals in J, if there is a (-) negative number, i would like that excluided from the equation.
I have two Columns
AC Tm%T%
DOMEQ25%26.5000%
INTEQ17%18.0200%
DOMPR10%10.6000%
INTPR 0%0.0000%
ALTIN 0%0.0000%
DOMFI29%30.7400%
INTFI 6%0.0000%
DOMFR10%10.6000%
CASH 3%3.1800%
Total 100.00%99.64%
The Tm column is the original model percentages for each class. Class INTFI is to be excluded (6%) so I need to adjust each of the other % accordingly and still add up to 100. I thought you simply increase all other % by the excluded amount but I end up with 99.64.
The equation I am using fot T is =C15+($C$21*C15) where C21 is the 6% cell in Tm.
How to select all sheets except the 4 sheets to be excluded using macro. i want to select worksheet with a macro except sheet name
"sheet1"~"sheet4",
What I want to do is return the oldest date to another sheet, but I only want to return the oldest date if the backlog value is higher than 0. So example below has oldest date with 0 as backlog value, I don't want to return that date, but go to the oldest one with an actual backlog value.
So I have the following raw data in Sheet1
[Code] .....
Now I want to put this raw data in Sheet 2
I use this formula to pull the data =SMALL(Sheet1!C3:C5,1)) but this returns the B4 value to me, which I don't want as A4 is 0.
I've been thinking about somehow using VLOOKUP or IF to sort this out but I am stuck.
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI am after a code that will sort out the below printing problem
I want excel to hide ALL OF column E from the printer, i want to see the information myself but when i press print, column E will not show on my printed page
i have found this
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.Name = "Sheet1" Then
Cancel = True
Application.EnableEvents = False
Application.ScreenUpdating = False
With ActiveSheet
.Range("e1").EntireColumn.Hidden = True
.PrintOut
.Range("e1").EntireColumn.Hidden = False
End With
Application.EnableEvents = True
Application.ScreenUpdating = True
End If
End Sub
but am not sure how to enter it, also if the code is correct. I have entered it using the alt+f11 then clicked on this sheet, and put it in there but it still dont work
I have a form that i use and i need to show some column wend on screen but i don't what them to print out. Is there a way?????
View 2 Replies View RelatedI've got a report that is filled out every day and submitted to the VIP's within the company.
They normally just open the file, press print and read the hard-copy.
Quite often the text of the column is larger than the cell size and the text is cut off.
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
View 2 Replies View RelatedI have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
NomActDevLoTolUpTolOutTol
Y-0.956-0.9480.008-0.0030.0030.005
Z-1.413-1.4130.000-0.0030.003---*|++++
DIA0.4220.4240.002-0.0030.006----|+*++
POS0.0160.0110.005
Need a bit of help with a dynamic column resize.
This is the scene. Imagine 2 lists of data, each list 2 columns wide (like 2 lists of names and phone numbers). List 1 covers column A and B, List 2 covers column D and E. I want it so that on the push of a button, columns A-E are automatically resized to be just big enough for their longest content, and column C resizes so that column D is on the next page.
The general idea is that you can print the sheet, and put together the pages relating to the seperate lists.
In the column marked SA I have some numbers. These are Sub-Accounts. I am looking to run off a report that prints off all rows with the respective SA number. I have only included a "4" and a "5" in my example but there is going to be more than one row "assigned" to Sub Account 4, Sub Account 5 etc. Ultimately it provides a break down of the accounts.
View 7 Replies View RelatedHow to select the value from each cell/row from excel sheet and transfer it to notepad and print it.
View 1 Replies View RelatedI'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies View RelatedI have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies View RelatedI am using Excel 2010
I have over 800+ pages of chart that only takes up 6 columns and around like 9000+ rows.
I wanted to print this chart on paper and need hardcopies. However, the chart in its current setup prints only on the left half of the page leaving the right half empty.
How do i make use of the full space properly? Each chart has a "page number" on it so I want the chart to print continuously from one half of the page onto the next half and then the second page, third, etc.
Here is a visual demonstration of how things currently are and how i'd like to get them to be:
As you can see, This is the first of many charts and its numbered Page 9 and next one is page 10.
Pic1
How this looks when i try to print, it's only on the left side. right is all blank
Pic2
How i want it to look like upon printing
Pic3
As you can see in the last picture, once page 14 chart has no space it automatically continues chart on right side of page and then moves on to print rest.
[URL]
I have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
I am looking for a formula to return the lowest value (MIN) in a range only IF it is the single lowest number. It's to determine a "skins" winner in golf, so I am looking for the best score on a hole that is not a tie, all other values can be zero.
View 5 Replies View RelatedThis is a simple question but I have been playing around with the syntax(unsuccesssfully) for a while. I want to do is sort a column (not the whole sheet). the column selection being determined by the activecell. I know I can use
View 5 Replies View RelatedI have an array of data with column headings and changeable row "item names"
in the left most column. The intersecting matrix of data contains quantity
values at the intersection cells of column and row headings. I need to
automatically reorganize the data as a list in a column with the row "Item
Names" at the left but and repeated as necessary but instead of the
additional columns of quantity values, I need to have this data listed in a
single vertical column along with an additional column with the original
column header that corresponds to the quantity value. I think there must be
some kind of lookup function to do this but I can't find the right way to do
it.
I have a matrix that looks like this:
1
2
3
4
5
6
7
8
9
10
11
12
And would like to rearrange this data to:
1
2
3
4
5
6
7
8
9
10
11
12
In actuality it's a 110000 x 3 matrix that should become a 330000 x 1 column.