I'm having problems with a formula. Here is what I would like to do:
I have a named range named "J46DATA".
If B5 returns "N/A" when matching to "J46DATA" and S5<>0 then return "DELETE" or IF B5 returns "N/A when matching to "J46DATA" and S5 = 0 then return " ALERT". anthing else can return false.
I started of with
=IF(AND(ISNA(MATCH(B5,J46DATA,0))
But it wouldn't let me put the S5<>0 after that lat parantheses.
I want to return a result IF a certain value is found in another cell. I've attached a sample workbook, but here's a description:
On the "Inventory" worksheet, in column H, I want to lookup the quantity in column B from the "Warehouse Response" worksheet. If the Part # in column E of the response sheet is NI1088106, I want THAT value to show under the NI1088106 part number, and I want the quantities for the NI1089106 to show under that part number. Ideally, the result of the formula would show a "0" if no data is found.
Here's the formula I tried beside the NI1088106 data, but it's not giving the desired results: =IF('Warehouse Response'!E:E="NI1088106", VLOOKUP(LEFT(A3,3),data,2,0))
What formula can I use to return the value in column A if the value is found.
Something like:
=LOOKUP($M$1,$B$18:$O$31,give the value in Column A of the row of where the result is)
I am trying to compare a single cell's Value in 1 worksheet to try to find a match in another column (or a range of cells). If I find a match I want the result to be a 1 and if it is not found then a 0.
Is this the Lookup function?
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
I have a cell in which numbers are displayed. The next cell is a calculation to display percentage. Lets say Cell A1 = 12,45. Cell B = 12%. What I would like is for cell C1 to sometimes display the "12,45" and other times the "12%". I imagine I have to get excel to see the % sign as text, but I do not know how.
View 2 Replies View RelatedWhen an exact match to the lookup value is not found, the function goes to the highest value that is less than the lookup value.
What do I do if I want to return the closest value, but not less than the lookup value?
For exampe, in my screenshot, if my lookup value is 6 horsepower, I want to return the efficiency for the next highest value (if no exact match) for 7.5 HP. Function would return 89.5
VLOOKUP.jpg
I am using a For Each statement to loop through a range to look for the match to a predefined variable. I have that part successfully set up.
But - I was it to STOP looping once it finds the first match.
Can I do this with a For Each statement? If so, how? if not, how to loop until a match is found?
I know I can do this by nesting a load of if statements but I was wondering if there is an easier way.
If in cell A2 I have the value 12 and I want cell A1 to return a value FOUND if any cell from A6 to A24 has the value 12 in it.
I need to pull data from Column C by looking at Column A. However it's not as simple as that. Under Column A, there are various fields, the first number represents a type of product and under what year it is currently in. So "300100" would represent a 3 yr product that is in it's third year, "210000" would be a 2 yr product in it's first year and so on. The problem is that when I pull data from the DB, some 3 yr products are flagged as products that are in their 4th or 5th years, which isn't possible. So I created an IF statement that takes this into account and ignores illogical combinations.
=If(A2="300100",C2,If(A2="301000",C2,If(A2="310000",C2,If(A2="210000",C2,If(A2="201000",C2,If(A2="510000",C2,If(A2="501000",C2,If(A2="500100",C2,))))))))
As you can see, I don't have the conditions "500010" and "500001" because it won't fit into the IF statement. Is there another way to go about doing this task? I've searched up the forums and someone recommended using the IF statement with VLOOKUP but I don't think it works in this particular case since I have 10 conditions.
A have a table like this:
X 1 2
A 9 5
B 8 4
I would like to have a condition that when is equal to B and 2, return the corresponding paragraph in the matrix (in this case 4)
I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.
I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.
The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx
I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.
i have weights entered in A1 , B1 , C1 and I manually enter almost same weight in D1, E1, F1 . Now I need the result as " OK " in G1 if the weights A1,B1,C1 match with D1,E1,F1 if it doesn't match then result should give "Please check again".
I'm having trouble with the attached example. An earlier member solved the odd-even problem, but I'd only like it to calculate if there is data in columns B to G.
View 7 Replies View RelatedI am struggling with a formula, that will display a certain cell only if a match is found, else produce a sum. It will be easier to look inside the document rather than explaining it on here. Described as well as I can inside the document
(None of the data used is factual. I created it myself to replicate)
Overtime for Payroll.xls
I have a spreadsheet (range A1:P5000). B2:B5000 would contain cheque numbers. Many of the cheque numbers would be repeated and would have common data in columns C, D, E, F, G, H, L and N.
I am trying to get VB code to copy and paste the common data when a user enters a cheque number.
For example:
When a user enters a cheque number in B3, VB would check B2 for a match. If a match is found, then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C3, D3, E3, F3, G3, H3, L3 and N3. If no match is found, then the user would have to manually enter the data in C3, D3, E3, F3, G3, H3, L3 and N3.
When a user enters a cheque number in B4, VB would check the B2:B3 for a match. If a match is found (in B2 for example), then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C4, D4, E4, F4, G4, H4, L4 and N4. If no match is found, then the user would have to manually enter the data in C4, D4, E4, F4, G4, H4, L4 and N4.
When a user enters a cheque number in B100, VB would check the B2:B99 for a match. If a match is found (in B90 for example), then VB would copy C90, D90, E90, F90, G90, H90, L90 and N90 and paste them in C100, D100, E100, F100, G100, H100, L100 and N100. If no match is found, then the user would have to manually enter the data in C100, D100, E100, F100, G100, H100, L100 and N100.
If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
I have at the top of a table the titles and then 3 rows under it. the titles are text..whereas the rows filled with number.
What i want in a cell is to display the text(of the title) of a corresponding value in the same column!..[simply 'look for a specific number in a table,and display the title of that column).. i input all info but returns #value error!does it not work with text?
I run a match formula which returns the row numbers of items i need to delete - at the moment, when a match is found, it will say "Match found, delete row 4" for example. Since multiple matches, potentially into the hundreds could be found - is there a way that i could run a script to delete the rows automatically when a match is found? So instead of putting the above "match found, please delete row 4" into an adjacent cell, could we just delete row 4? & then move onto the next row where a match is found?
View 9 Replies View RelatedI have a huge worksheet that contains four character payer code in column D for example: 9081, M897, 0235. I am looking for a function that will show the result in column AD
IF payer code in column D starts with a 9 (9???) - GOVT
IF payer code in column D starts with a 7 (7???) or M (M???) - MNGD
IF payer code in column D starts with a 2 or 0 (zero) COMM
IF payer code in column D starts with either Z, I, C - PTR
I tried IF function, but it didnt work for me.
Column A = program which could be 100%, 90/10 or 80/20
Column B = Dollar amount submitted
Column C = results
I need a formula in C1 that says:
if A1=100% then B1*100%, if A1=90/10 then B1*90%, if A1=80/20 then B1*80%.
With 2 programs my if statement worked fine, but now that there's a 3rd I can't get my if statement to work properly.
=IF(LEN(I3),I3,J3)
at the moment if there is no result it equals 0
I thought this might work..
=IF(ISNA(LEN(I3),I3,J3)),"",LEN(I3),I3,J3))
Is there a way to have a formula return only positive numbers? basically if the result is of this calucation (B4-(B3*B6)-(B6/2)*0.125) is >0, then return the result, if not return "" (or 0).
View 6 Replies View RelatedIn cell b2 I have a formula =text(today(),"yyyy") which daisplays todays date as a year, in cell b3 I have =text(today(),"mmmm") which displays todays date current month.
I have a column of Months and Years
January 2014
February 2014 etc
I need todays (current) month and year to indicate in a helper column next to the relevent month and year as a number 1 to use as a reference to return date from the row where the 1 is displayed, I have tried =if(and(b2=a10,b3=b10),1,"")) and it dosent like the fact that the year in the colmuns is entered as standard text, is there any whay to do this?
My issue concerns going down rows in a data set. Due to the fact that the data set I am pulling from is not standardized, and roughly 10% of the data set has two extra rows of extraneous data below the reference cell (foreign currency balances which I don't need). The point in my formula is the "+2" (down two rows) condition. I needed it so that the "+2" is replaced with a condition inwhich after the reference cell in the INDEX( and MATCH( function is found the command goes down rows until the term "USD" is found. My formula is as follows:
{=IFERROR(INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C7,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11),INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C8,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11))}
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
Attached is a sample file.
I can't figure out a formula that will match either 1,2,or0 in column K and offset to corrosponding value in column B. Then average of all values that came up.
how to accomplish this. VBA is acceptable, but formula is prefered.
0.644
0.627
0.641
[Code]....
The list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim a, i As Long, ii As Long, b(), n As Long
ListBox6.Clear
With TextBox2
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "No Entry !"
TextBox2 = ("")
Exit Sub..........
I am trying to make a column show the result of a formula as positive number only. Right now the column subtracts two other cells and displays the result. I am trying to make it show all the results, positive or negative as positive.
View 3 Replies View RelatedWhat i would like to do is Hide Rows Based on Cell Value in Multiple Sheets & Multiple Columns
and i need the macro to be fast
Sheet1
If the value in Range BE11:BE160 equals 1 dont hide the row
If the value is 0 or then hide the row
Sheet2
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet3
If the value in Range BE11:BE160 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range O1:O150 equals 1 dont hide the row
if the value is 0 or then hide the row
Sheet4
If the value in Range B1:B150 equals 1 dont hide the row
if the value is 0 or then hide the row