i have 6 columns representing people B6:B500 C D E F G all the same in each row a date as worked will be entered for each person say from b6 to g6 2,6,1,3,5,4
in A1 i want to show the earliest date worked which is 1 then say 7 is entered into d7 i need A1 to show 2 as the next earliest and the same to happen as each date is entered i am using 2007 at work and 2003 at home.
I have two columns in a table; Plan and Date.
Plan Date
A 01/02/03
B 12/08/05
C 02/04/06
C 06/04/07
C 06/04/07
Now I want the third column, also a date, so that it returns the earliest date for the repeating plan type.
Plan Date New Date
A 01/02/03 01/02/03
B 12/08/05 12/08/05
C 02/04/06 02/04/06
C 06/04/07 02/04/06
C 06/04/07 02/04/06
a formula to pick a first and last date from two lists of dates.
I have attached a spreadsheet to show the exact problem.
remove duplicate.PNG
is there a way to remove the duplicates in column ICAP ID... but only remove the icap id that has the earliest completed date(completion_dt).
I attached an example excell...
I'm working through a large database on sheet 1 that has multiple transactions for each person, what i am trying to do is find the earliest date and the first amount that each person deposited money. The findings will go into a table on sheet 2
This is a dummy data of what i have: Sheet 1 - database....
I'm trying to find a formula that will return the earliest date in a cell looking at the six columns to the left of the earliest date column.
See below for example.
Employee Date1 Date2 Date3 Date4 Date5 Date6 EARLIEST DATE
Long Johns 7/1/2012 7/1/2012 7/1/2012 7/1/2012 7/1/2010 7/1/2012 7/1/2010
I have a column of dates listed at the bottom of this post. I am looking to have a formula in a cell that gives me the earliest date from the column. I have tried Min() and Small() with no success. Is it perhaps the "AM" and "PM" that is throwing things off? A small example of the data:
11/21/2008 AM11/09/2008 AM11/09/2008 PM11/09/2008 PM11/10/2008 PM11/11/2008 AM11/11/2008 AM
and it should return 11/09/2008. Thanks in advance any and all.
Ed
What I understand is that balls are drawn in each dated lotto draw and the numbers of the balls thus drawn are entered into a spreadsheet against the actual date of the drawing - and so forth and so forth for each successive drawing.
Here is my version of the question:
If I want to look up the LAST date that a specific ball was drawn, the array formula that daddylonglegs provided works 100%, but when I replace the MAX in that formula with MIN (to get the earliest date??), it ALWAYS responds with 00/01/1900 with the cell formatted as a date, or simply 0 if it is formatted as a number.
I made sure that the ranges did not include empty cells and still it gives me that answer.
I attach the same workbook with daddylonglegs' formula in column D and my "tries" in column F.
We have multiple work orders per opportunity, and each work order has a date. I have a sheet of these work orders which shows the work order #, work order date, and opportunity date. What I want to do is add a column which reports the work order date if it is the earliest instance of a work order for the opportunity (said differently, the first work order for the opportunity). Is there a way to write a formula to report whether the date of the row is the earliest date for a given opportunity, all in the same table?
View 1 Replies View RelatedOn the attached sample file, I used this array formula to lookup fo the
"First purchase date" - {=MIN(IF((Sheet2!A:A=Sheet1!A2),Sheet2!B:B))}
However, for the "Second purchase" and "Third purchase", i'm stuck and can't think on how to return the dates.
There is a speadsheet at work with a column which has a range of dates (from 18/05/2003 - date) which information gets drawn from every Friday. The information needed from the column is pretty simple but lengthy to expalin. For example...
[url]
As you can the dates are in no order...and need to stay that way. The information needed every week is shown here...
[url]
I have got the formula for the number of enteries between each date but strugling with the earliest date within the dates. I can do it manually by auto filtering the column and looking for the date closest to the earliest date but this is long.
The dates change on a weekly basis...just to throw a spanner in the works.
I need an excel function to return the earliest and latest date for a particular/unique ID.
For example: In my sample workbook, the earliest date for all the columns with ID = 1 should return 11/1/2001 and the latest date should be 12/2/2011. If all the dates for a particular ID are the same, it should just return that date. For example, for ID = 2, all dates are 5/5/2010 so the earliest and latest dates should equal 5/5/2010. The earliest and latest dates have to be for each unique ID.
Ok so let me set this up. I have 2 columns: .....
View 14 Replies View RelatedI tried searching through the forums, but I don't exactly know how to word my question!
I have a workbook with two sheets: Meetings and MasterStatus
On the both sheets I have taskID for a specific task.
On the MasterStatus sheet, I want to use an array to look up the next meeting date for each taskID (Column C), referencing the Meetings sheet (Column E) to do so.
The formula I have so far doesn't work:
=MIN(
IF(
AND(
Meetings!$A$2:$A$3000>TODAY()-1,
NOT(ISBLANK(Meetings!$A$2:$A$3000)),
Meetings!$E$2:$E$3000=$C$7),
Meetings!$A$2:$A$3000,
0
)
)
I have a date range, containing blanks and values. I need a function to show the earliest date that contains a non-blank value. The function should be robust enough that I can sort by date and still show the correct data.
Example...(correct answer would be 10/26/2006)
Date ... Value
10/23/2006
10/24/2006
10/25/2006 0.08
10/26/2006 0.10
10/27/2006
10/28/2006
10/29/2006 0.18
10/30/2006 0.20
10/31/2006
11/01/2006
11/02/2006
11/03/2006 (0.18)
11/04/2006 (0.15)
I am having issues with a min if formula, even though i enter it as an array (ctrl +shift+enter), it only returns a zero.
The formula is supposed to return the earliest date from Raw data if the name of the company matches the one from the data validation ('Company lookup'!D3).
Dates are in column D and company name in column M
I checked, the dates are all formatted as dates
=MIN(IF(RAW!$M:$M,'Company lookup'!D3,RAW!$D:$D))
Using online examples I am usually capable to reconstruct whatever I need. However, it's the combination of things I need to do now, which has left me banging my head on the keyboard for days now
Here's the data I am working with:
Sheet 1:
Sheet 2:
And here's what I need to get done:
From sheet 1, select first ID entry from Column A.Find matching ID in Column A of sheet 2On match, find in Column B the earliest date belonging to the concerned IDCopy that earliest date next to the corressponding ID in Column B back on sheet 1Return to step 1 and repeat for next ID entry. Do until end of list (sheet1)
So the result should look as following on sheet 1:
The major issue I am having is the combination of step 3 and 5. Because it probably means something like moving through an array that's within an array through which one is moving. And I am just missing that bit of experience that allows me to make that thinking step. I just keep falling off if you know what I mean...
I have a column of figures in a file sent to me recently which are dates but for some reason have been reversed eg 20140321. This is 21st march 2014. However I have tried formatting the number as a date (as we would normally see it in UK eg 21/03/14 or similar) and I cannot get Excel to recognise it as a date - I just get a long row of asterisks. How do I get a recognisable date sequence?
View 6 Replies View RelatedI have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI'm trying to set up an auto sequence number(col A) based on a date entry (col B) as in the example below. The sequence number should reset to 0001 each time the date in Col B changes.
Col A Col B
072306-0001 07/23/06
072306-0002 07/23/06
072306-0003 07/23/06
072406-0001 07/24/06
Find below the data sequence. 1st is the customer code, next are the date we have recd. the orders. In one excel command i want to find out the when was the order recd. date.
Code
17.11.2013
18.11.2013
19.11.2013
20.11.2013
11310
178
1235
1235
176
[Code] ......
If I give code and order qty then the formula should go to the code row and find out if any order of that qty had come if yes then date has to be returned as a result.
I am trying to create a calculator which will show start date and end date based on the specific date provided.
EX: column A has January 1, 2013, column B has Wednesday, Column C should have a start date which supposed to be 4 days ago (December 28).
is it possible to display the week number of todays date (today()) from a physically entered start date (which would obviously be week one), the start date would be november 4th 2013.
View 3 Replies View RelatedI have a spread sheet for 12 months. I am wondering if there is a way to format to show in the cell only day of the month.
View 4 Replies View RelatedHow do I get cell B1 to show only the date that corresponds with the current date?
ex.
A1
15-Nov
26-Nov
29-Nov
2-Dec
4-Dec
4-Dec
5-Dec
6-Dec
If I enter 12/2, in one of the rows in column A it will display today dates in cell B1 since today is 12/2, but when tomorrows comes, since there is not a 12/3 date in column A, B1 cell will be empty, but when 12/4 comes, cell B1 will show 12/4 since that is a 12/4 date
Basically, what I want is to find the earliest EPSI1MN and its associated EPSI1YR and EPSI1NE, within the same period of EPSI1YR and then store the results in a separate sheet. This process is to be repeated for 12 years of data, covering more than 4000 companies.
View 3 Replies View RelatedI have a workbook with two sheets.
Sheet1 contains details of all of the jobs I do.
Sheet2 is my customer list.
Customers appear only once in sheet2, but may appear mutiple times in sheet1.
In sheet1 I have customer name, lead date, job date et al.
In sheet2 I have customer name, first date, last date et al
I am trying to populate first and last date in sheet2 from the lead date and job date in sheet1.
Sheet1 has a range of 500 jobs
I'm trying to pull out the earliest and latest dates associated with a text string in a workbook.
Min Max dates example.xlsx
i.e. in this example, I want one column to display the earliest date associated with DU 145, and the next column to display the latest.
From what I understand, I need an array formula to do this and have written the following, which works:
=MIN(IF($A$2:$A$6=A2,$B$2:$B$6))
(confirmed with CSE) - and the same for MAX.
Where I'm struggling is that DU 145 may be entered in the workbook as DU145, DU 145 or DU-145 and I need to take all of them into account. I tried:
=MIN(IF($A$2:$A$6="du*145",$B$2:$B$6))
As this works in a COUNTIF formula in the same sheet. But this just returns a date of 00/01/1900. I'm new to array formulae & haven't really worked them out yet. Is there a way to do this? I assume it's something to do with the way I'm entering text as removing the wildcard * makes no difference.
Below is an example of an Excel sheet I'm working with: [URL]
Basically, I'm trying to delete the duplicate rows by matching ID, Date and Type. If ID, Date and Type are the same, then, I want to only keep the record with the earliest Time in case of Type = In and the latest Time in case of Type = Out.
So, for example, in the case of ID = 1, there are 3 records for In, I only want to keep the one where Time is: 8:01 as this is the earliest. The other 2 records should be deleted.
Similarly, in the case of ID 3, I want to keep the record where Time = 18:05 as this is the later time out of the 2.
Can this be achieved by Conditional Formatting or Macro or VBA?
I'm trying to pull the earliest and lasted times out of a list of time stamps. Say I have a column full of clock in and clock out times and wanted to find the first clock in time and the last clock out time (just an example). My lookup_value would be a Store number. I can't post it here due to legality reasons, but I have a column a store numbers that will be my lookup values and I need to find the earliest and lastest time in a list of data on another tab.
View 9 Replies View Related
