I have a series of rows and columns. Each intersection has a formula. I want to be able to manually enter text in the cells that contain formulas but then click a button next to the row if I want the formulas back. Here's what I have written so far. Is there an easier way to write these OR is there a more streamlined way of accomplishing what I'm after? There will be about 39 rows and 39 associated buttons.
(The screenupdating lines are there just because I don't want the screen to flash in any way when I click the button)
I'm using Excel 2003. I have been using SUMPRODUCT to look at too compare columns and data that is contained in both. Column L11:L52 contains the numbers 1 to 4 and Column K11:K52 contains the word YES in some cells. I just want to look and see if text is contained in a row in column L is it contained in that row in column K. This is the formula I'm using but it seems over complicated and I'm sure there is a way of just looking if the cell contains information without worrying what it is.
simplifying a formula which gathers data from about 50 worksheets from within the same work book.
The data to be gathered is in the same cell on each worksheet and is simply a number but i want the SUM of theses numbers carried forward to another worksheet. Each worksheet is named by date i.e. sheet 1 is named "16 June 2014" and sheet 2 is named "23 June 2014" and so on until "30 March 2015" (Each sheet represents one full week Monday - Sunday).
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
I have the following code which works but is slow. All the code is the same except the address part and the destination range. Any help simplifying would be great. Also, every time I run the sub it asks me if I want to replace the destination cells. Is there any code to circumvent that? Lastly, although the second and third query requests have a different destination range, excel shifts the previous query to the right, hence first command after final query request.
I have a macro which builds a report to be sent out daily, however some days there are no updates in certain categories.
The macro copies over certain template lines from a template report, then filters the formatted data sheet and copies the rows over to a report the problem is that certain days the filter returns no rows, so I put in a lengthy if statement
Here is the code I am currently using, I would like to simplify it (the entire macro would run this about 20 times over for different sections).
I have a workbook with 20 worksheets. Sixteen of them represent the months and quarters of the year. On those 16 sheets, I would like to have two buttons (32 buttons in all). One button is to print (and does quite a bit of formatting) the report for that month and the other submits the report (formats, saves, and e-mails notifications) after the user completes it.
Rather than having to maintain 32 buttons, I would prefer to have two buttons that are available to each of the 16 sheets. Is there a way to do this?
I have approximately 20 sheets that all have 4 toggle buttons on them. Coded as below (with different ranges for each button). So when I wrote them I took the easy (for me anyway) way and copied all the code for all the buttons in each sheet. (Buttons are named Zoom1, Zoom2 etc.) Private Sub Zoom1_Click() If Zoom1.Value = True Then ActiveWindow.Zoom = 143 Range("A1").Select ActiveWindow.LargeScroll ToRight:=-10, Down:=-10 Else ActiveWindow.Zoom = 75 ActiveWindow.LargeScroll ToRight:=-10, Down:=-10 End If End Sub.........
There are 10 rows of data, and would like to assign value at the end of each row as "initiated" "In the process" "Needs to be Reviewed" "Completed", by using Buttons with different macros.
I've searched through the forums for this information, and I have found a couple of similar issues that have been solved, but copy+pasting the code into my form has not had favorable results.
Basically, here is what I am after:
I have a sheet that already has 4 buttons active, with a handful of other subs that they are calling. I am wanting to be able to add new buttons and have them call a universal macro that will forward them to my existing subs. However, I'm wanting a variable to be set based on the Caption of the button that was clicked. For example:
I'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.
I tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
My problem is I cannot copy from a Form Control drop down box, and I need to do this for ~10 drop down boxes in about 200 xls files. The files follow a template so the drop down button Inputs are uniform. Here is some more detail:
I’m building an Access Database so that our data (currently in many, many Excel Spreadsheets) can be efficiently queried. The old system was that when asset data was collected, the data would be entered into an Excel spreadsheet, using a Template. So for example:
Project A1234
Name Main Street Pipe High Street Pipe
Ref No. 12345 12346
Installation date 22/08/13 19/07/12
X Coordinate 55667 99212
Y Coordinate 77889 12364
We have hundreds of these files, but I managed to get all the files in one folder and Paste and Transpose the data from the relevant Cell Ranges in each file (using a VB sub) into ONE summary sheet. Success; or so I thought.
Unfortunately for one generation of the template (people changed them slightly every year), the template had people enter information into Drop Down Menus. Not a problem when they’re associated with a cell, but these were free floating Form Controls.. so you can’t actually click and copy from them, or call them in VB as you would a specific cell.. afaik.
So my issue is how can I extract the data from those Form Buttons? I’ll try and provide as much info as I can:
Firstly I tried to find some sort of identifier for each Form Button. The dropdowns are called Combo Boxes, (Developer tab > Insert > Combo Box (Form Control) ), and when you select them (by right clicking) and hit the View Code button in Developer Tab > Controls the following shows up in VB.
Sub DropDown44_Change()
End Sub
I’m guessing that the number is related to the button so that’s one useful thing, an identifier of sorts. There’s no actual code there though really from what I can see.. My problem is I have no idea how to extract from DropDown44!
The range of values in the drop down comes from a separate sheet where there’s just a list of the values. There aren’t any cells linked to the drop downs though. If I enter a cell in (Right Click) Format Control > Cell link: then it prints the number (e.g. 4) of the value in the range. So if the drop down options are “Monday”, “Tuesday”, “Wednesday”, “Thursday” and “Thursday” is selected, the linked cell says: “4”.
They didn’t link a cell, then I could call that cell in a VB sub and the job would be done. Unfortunately they didn’t, so I tried Recording a Macro and selecting the drop down form control.. That didn’t really work, except if I right clicked it, I got some more info from the macro VB:
ActiveSheet.Shapes.Range(Array("Drop Down 19")).Select
So is my drop down an Array? My understanding of an Array is that it’s a list of arguments.. all I get there is the name of the button. I am not experienced in VB so this is as far as I’ve got. Perhaps I can get a sub to select the button using the above line, but I need the info from it, i.e. which value is currently selected in the Drop Down.
(Using Excel 2010 but the .xls files are from ~2005)
I have several option groups (Y & N in each) linked to cells to display TRUE / FALSE depending on which option is selected in each group. I have another cell which I want to apply conditional formatting to if EITHER Y or N is selected in all groups. At present I use COUNTIF to check for FALSE=0 in the linked cells which works if all the answers are Y. How do I apply CF if there is a mixture of Y & N (TRUE / FALSE) in all groups (I'm not sure if I've explained that well or not).
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I am trying to create a formula which looks in 1 cell to determine 'IF' it states either "BUTT CUT" or "DIE CUT" and then does a VLOOKUP in a table array for each which ever column relates to asnwer to 'IF statement.
This is as far as I have got but even this won't work:
How do I get the data above, into a spreadsheet like the one below? I have tried If/Than Statements with no luck. I need to total the amount of invoices during a specific month for a specific customer.
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
I'm trying to make a macro that creates a button (to run another macro). I'm also trying to make sure this has a specific name, instead of just "Button#". The code I get from recording this is:
i want to filter the sheets on click of a button .
like in this sheet i want to filter the column E in column E their are many reasons of non delivry of my products i want to find out which department is accountable for how much loss so on click of a button it filters with 2 reasons
RTM department
1)Ko Cannister stock Out 2) Outlet Need fresh stock
Dear sirs,with best regards,i have in attached example file some cells i have protected them by ( tools-protect ) which is the general way for protection,for special purpose i ask you kindly to help me by:
creating a buttons with macros to protect and unprotect the ( cells,columns,rows,and all the sheet) that i need to protect them, when i want to (protect or unprotect) i have to click these buttons.
If possible I would like to create using vba a button at the end of my rows of data allowing a user to copy and insert the row next to the button, i.e. duplicate.
I am using the following code to create the button but am not clear how to link a button to a row or cell. The button would be within a cell in a row at the end of the data.