Someone might find this interesting. Inherited a file that need to total columns but almost 50% of the file has cells w/ the single quote tick infront of the number.
Ex '2257894 or '2234. How can one remove those single quotes out of a cell? NOTE: Cell values are not the same length.
Is there a way to clean all of the single leading quote marks from all cells in a sheet?
'Bob
'Tom
'Jerry
to
Bob
Tom
Jerry
I'm importing data and I have several columns to deal with and will never know how many columns/rows are in a sheet.
I am a SAS programmer and often use SAS Proc Export to dump data to Excel. Sometimes the data is an Excel formula, e.g.
=hyperlink("#Sheet1!r1c1","click here")
Because the data is text, what get's put in the cell is '=HYPERLINK("#Sheet1!r1c1","click here") (note leading single quote).
I cannot use the replace function to edit them out, so must hand edit each one out -tedious at best.
In a large range of cells, how I can remove the single quote at the beginning of the contents of each cell? (without single quote they would be formulas). It didn't work using CTRL + L and trying to replace the single quote by blank applying this to the whole range. I am currently using Excel 2003.
Example:
cell a1 contents: '= IF (I17 = "----------", "----------", E17-C17)
cell a2 contents: '= IF (I18 = "----------", "----------", E18-C18)
cell a3 contents: '= IF (I19 = "----------", "----------", E19-C19)
....
etc., etc., etc.
I would like to display the zero percent (0.00%) value in a single cell on a worksheet. Typically, there will be a positive value input in the cell such as 3.50% but occasionally it will require a zero value. When I type the zero value, the cell is displays a blank. I do not want to show zero values on the remainder of the worksheet.
View 2 Replies View RelatedI am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
See attached file, basically need a formula that will give me the unique resources for each location. I know a pivot table would be easier but i need a formula for my model to work.
View 6 Replies View RelatedI data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
What I require is the macro code to achieve the following:-
Cells A2, B2 and C2 will be completed manually, however, when a new quotation is required the user must enter a new Control Reference Number in cell E2 and then press the Generate button.
Once pressed the Macro behind the button will generate the following :-
(a) Quote number underneath the last one in column 'A'
(b) Change Ref underneath the last one in column 'B' (this was the ref number input above in E2)
(c) today’s date underneath the last one in column 'C'
(d) a blank Quote Tab i.e. labelled the next number in the sequence i.e. Quote 2, Quote 3 etc which should be created copying the Template Tab
N.B. the total number of Quotes in any one work book should be a maximum of 30 so some form of checking would be required.
I need to calculate a quote over 4 years but the first and last years are not full 12 months.
On Row 20 are monthly costs for each year. The start and end date is in Row 3.
I need to find a formula that can calculate ANNUAL TOTAL for the all these year in Row 22 populated automatically, not just manually times the months in each cell.
Here is a sample file.
I have been using Excel for many years but haven't dived much into using VBA. I believe it holds the answer to my question. I have developed a spreadsheet with 10 tabs that is used for billing customers. I'd like to take it a step further and, on a separate tab, have a quote automatically populated and then be able to be printed. I need for the VBA to scan certain areas in each tab to see if data is present or greater that 1. If there is data present, it would need to list the content of 3 cells (description, quantity, and total cost). I know that I can directly link but it needs to be dynamic and only display/show data that is present (as not all cells will be needed for every client).
View 2 Replies View RelatedI work in sales and when under target I need to know how much more i need to sell to hit target. e.g
quotes 10 sold 1 currently at 10%
my target is 50%
at the minute i would have to work this out manually
like i need to quote and sell the next 8 to hit the 50% target.
What can i use on excel putting my current quotes and sales and my target in so it gives me the quotes and sales i need to do?
Any escape characters in Excel. I'm trying to do something like this:
=FIND(""",A1)
Way to create order and quote numbers. I'm currently starting an order number with a "O" in front of the order number and a "Q" in front of the quote number but this presents a problem when trying to create the next consecutive number because the number has a letter at the start of it so I can't use the method plus 1. I'd just simply remove the "O" and "Q" from these numbers but I need the numbers to be unique from each other and putting the "O" or "Q" in front was the only thing I could come up with to avoid the numbers ever being identical. I often need to look up these numbers and return the values in that row so the numbers need to be unique from one another.
The information for quotes and orders is saved on separate workbooks but I'd still like the numbers to be unique from one another.
Having a letter at the start of each number or a work around for using the plus 1 method when you do have a letter at the start of the number?
i want to create a quote worksheet with a type of material validated list, a type of stock validated list, a volume of material sum, a cost per lb of material varible and a typ of stock % markup to quote stock material. i have a pdf of what i want it to look like i just need help formulating it. thanks. Auto Merged Post;here is a link to the pdf. i am not sure what to call what i want to do...
[url] Auto Merged Post;here is the xls file.
I am trying to create a basic stock quote reader.
I recorded what happens when I use the "from web" tool from the data tab. I then tried to modify it by allowing me to manually (with the inbox) put in the ticker that I want. When I run it, it does nothing. When I manually put in the ticker symbol for the company, it works.
For instance, I I were to replace
"URL;http://ca.finance.yahoo.com/q?s=" & TICKER & "&ql=1", Destination:=Range("$A$1"))
with
"URL;http://ca.finance.yahoo.com/q?s=ATVI&ql=1", Destination:=Range("$A$1"))
It would then work, but I would have to manually change it every time.
Here is the code
___________________________________________________________
Sub Macro1()
Dim TICKER As String
InputBox ("enter ticker symbol")
Cells.Clear
With ActiveSheet.QueryTables.Add(Connection:= _
[code]...
I have to create a formated file to test our system every other week, I want to create a File Generator using Excel and the replacement values forumla "& A1 &". However the file is in a CSV format containing a lot of quotes and when I attempt to use a line of the file in a formula with "& < Cell> &" excel reports errors, if you accept excels help it strips out the quotes and commas. Anyway around this? having to have a user save the file is CSV format would be to complicated. Sample file attached.
View 2 Replies View RelatedI want to alert a user that he or she has typed in a text string that begins or ends with an apostrophe ' or begins or ends with a quotation mark " so that they can take corrective action in removing these characters. The reasons for this are superflous to this post but what I thought was a logical answer returns a formula error. Here's the scenario:-
A user enters a string of text in cell A1.
Cell B1 checks if the text, if any, in A1 begins or ends with a ' or a " and if it does, returns an "Error" message
The formula I've tried in B1 is =IF(OR(LEFT(A1,1)="'",LEFT(A1,1)=""",RIGHT(A1,1)="'",RIGHT(A1,1)=""")),"Error","Ok") but Excel will have none of it.
I am using Microsoft 2013 and am looking for 4 formulas in order to split 1 cell in to 4 (across same row). Number of characters varies between each instance of """.
I would like the formulas to start in column B-D (data in A)
I am looking at formulas based on specific instances of a quote mark in cell from data in column A
Formula 1 - Return with characters up to and including the 5th instance of """
Formula 2 - Return with characters after 5th """ and up to and including 6th """
Formula 3 - Return with characters after 6th """ and up to and including 7th """
Formula 4 - Return with characters after the 7th instance of """
Example below...
Cell A1
xxyy","aabb","ee,ff,""gghh"hh,"llmm,mmnbijp"oossww"
Desired results
Cell B1 - Formula 1
xxyy","aabb","ee,ff,"
Cell C1 - Formula 2
"gghh"
Cell D1 - Formula 3
hh,"
Cell E1 - Formula 4
mmnbijp"oossww"
Trying to build array elements from a list
19909
19953
etc
My thought is in helper column to concatenate the quotes and comma "xxxxx", Then I will copy paste special transpose and should have an array list
I tried ="""&A2&"","
Returns
"&A2&",
But I need it to return "19909",
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
This also includes the WHITE sheet.
I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedIf I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I have 2 columns E and F that I am using, in Column E, I enter a time say 22:43:00, column F currently ads 15 minutes to what ever is in there with '=E3+TIME(0,15,0)' which is fine except if column E has no time in it when it automatically puts in 00:15:00, hov can I get the cell not to display anything in there is no value in column E.
View 2 Replies View RelatedI'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies View RelatedI have a macro that determines the last populated row in a region and fills down the formula to the last row. It works awesomely unless there is only ONE row populated, in which case it copies down the row above. Here is the code:
Sub CopyDown()
Dim LastRow As Long
LastRow = Cells(Cells.Rows.Count, "C").End(xlUp).Row
Range("O14").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-1],Key!C[-4]:C[-3],2,FALSE)"
Range("O14").Select
Range("O14:O" & LastRow).FillDown
End Sub
I have this code for multiple columns, etc, but they're all using the same "fill down" information.
I'm one of those "create a macro by recording it, then edit it".