I have 2 sheets having name DB and Limit. In DB sheet i enter data and in Limit sheet I check each ID avalable Limit I want to ask if it is possible that a macro checks available limit in Limit sheet when I enter values in DB Sheet in Columns C & D and gives me warning message if entered values in DB sheet exceed from available limit in Limit sheet ....
View 9 RepliesI'm struggling with an alternative method of suppressing the # DIV/0 in my worksheet. I'm familiar with the ISERROR function and it's use as well as using =IF(A2=0,"",A1/A2), however I'm still getting #DIV/0 errors and I can't use ISERROR because
I have exceeded the number of nested IF's.
I've attached an example. In the example, the only time the #DIV/0 appears is when "Y" appears in the Commit and In-House column for all rows. This is the condition I'm trying to suppress the #DIV/0 error for.
All the formula's I'm using are Array Formula, as are all my attempts to suppress the error....
I hope the title makes sense. I have a spreadsheet that I'm trying to use to calculate volumes of liquid. For each liquid there is a minimum and maximum amount that can be included in a vial, and a checkbox to indicate if it should be included or not. What I'm having trouble with is some logic (other than a million if= statements) to determine the amount of each needed.
If only a few are selected, using the max value for each is fine as it is below the volume of the vial, so I want to use the max. But if enough are selected, the max for each would exceed the volume of the vial, and I want to pick a percentage of each component's range until we get a volume that will fit in the vial (ie, it figures out that 84% of the max for each will fit, but knows never to drop below the min).
I am trying to find a way to identify the nmber of periods where a particular value is exceeded.
Basically I have daily data on sales for 40 years and I would like to define a level of sales i.e. 23 units per day and a period i.e. 10 days and then output the number of times where the recorded sales level is greater than 23 units per day for 10 or more days.
Ideally I would like it so the sales level and period can be set in reference cells and the formula can adapt to different sales levels and periods.
The data is formatted as follows: ...
From G13:G33 I have an array of values of which I have computed.
E36 is where I have set my threshold value.
What is the excel formula to use, to count the PERIODS (not number of times), which this threshold value has been exceeded?
I have been trying to do an if statement but need to choose between 10 options:
In Column AA I could have any one of the following 10 text entries - In column AB I need to return 8, 4, 2, 1 or 0.5 depending on which is in AA (this column AA cannot be sorted nor are people willing to cut back to 5 options )
"Very High" returns 8
"Very High (>50)" returns 8
"High" returns 4
"High (>20)"returns 4
"Medium" returns 2
"Medium (>10)" returns2
"Low" returns 1
"Low (>5)" returns 1
"Very Low" returns 0.5
"Very Low (<1)" returns 0.5
naturally the following IF statement won't work as I have exceeded the limits
What i would like to do is record a cell on sheet1 in sheet2 when it reaches a certain number i.e 2. The cell in sheet1 changes all the time but sheet2 must not refresh. Is this possible with a formula?
View 9 Replies View RelatedI'm trying to calculate when a waiting time falls outside and exceptable time period. This is based on two colums of data. The first column contains a number from 1 to 5 and the second a time period. (see attached example) in column "C" I need a formula that looks at the value in "A" and if it equals (1) and the time period in "B" is > 00:02 it should show "EXCEEDED". If "A" does contain a (1) then the code stops otherwise it does another loop of "A" looking for a (2) and a time in "B" of >00:10 etc.
View 3 Replies View RelatedWhich exceeds the level of nesting allowed.
My formula is as follows:
=IF($J$55=C73,O73,IF($J$56=C73,O73,IF($J$57=C73,O73,IF($J$58=C73,O73,IF($J$59=C73,O73,
IF($J$60=C73,O73,IF($J$61=C73,O73, IF($J$62=C73,O73,IF($J$63=C73,O73,IF($J$64=C73,O73,""))))))))))
I am on Excel 2010.
i really frustrated to my excel file already . every time when i open it and it will appear a error box '' some text formatting may have changed in this file because the maximum number of font was exceeded'' .
View 9 Replies View RelatedI have an Excel macro which works well in comparing two columns A and B. It populates column C with unique values in A and not in B, populates column D with unique values in column B and not in A and puts the values found in both A and B in the fifth column (E).
Data in the columns A and B of Sheet 1 has exceeded 1,048,576 (the maximum allowable in Excel 2007) and i will copy the overflow data in Sheet 2's column A and B and i will like the comparison to continue in the next worksheet.
I need the macro to treat the second worksheet as a continuation of the first sheet and not as a separate data. (The values i am comparing have exceeded 1million).
Sub twocols()
Dim d As Object, na&, nb&, a, b
Dim e, p&, q&, r&, m
Set d = CreateObject("scripting.dictionary")
[Code] .......
I would like to highlight (conditional format) the "response required by" (Row A) cells / dates if the "current date" (cell $B$2) is exceeded AND if the "response provided By" (Row B) remains BLANK:
Current Date
=Today()
Response Required By
Response Provided By
29-10-2013
23-10-2013
[Code] .......
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI want to enter the word 'Closed' in cell B1 when the due date in cell A1 is exceeded by 272 days. I have tried using conditional formatting and excel accepts the formula but nothing seems to happen. Here is what I have tried;
B1=IF(A1<=NOW()-272,"Closed")
I would like to get number of cells since the cell value exceeded a given number in a given range of numbers.
example
cell address cell value
a1 1
a2 1.9
a3 -1.2
a4 4
a5 3
I would like to know number of cells since value was less than 1 : the answer is 3 (a5,a4,a3)
Number of cells since number has exceeded 3: the answer is 2 cells back ie a5,a4
I need formula (not VB) that will add time (0:30 minutes to each working shift) when these times are exceeded:
11:00
+0:30
19:00
+1:00
35:00
+0:30
[Code] .........
I copied the macro and it works on text files, but will this work if you have
a .csv file or does it have to be text? What I have is an extra large .csv
file that needs to be broken up into a couple of sheets.
I am running a formula on a large data set and need the returned value to never be less than zero or more than 100. using the MIN and MAX functions, but how do I use them both at the same time?
View 4 Replies View RelatedHi All,
Why is
1-NORMSDIST(7.8) = 3.10862e-15
while
1-NORMSDIST(7.9) = 0
Is there a limit to how far out the Gaussian PDF curve you can go before Excel rounds to zero?
I'm adding some necessary code to the beginning and end of some cell contents in Format | Cells | Custom and I seem to be coming up against a character limit.
I'm using the phrase "!!<"@">!!" to add the code, but with some cell contents the result is ########### (but much longer), and I'm having to remove some of the text to make it work. The limit seems to be around 255 characters.
I have a formula that adds two numbers. Here it is:
=IF(E10="","",(E10+$C$8))
I don't want the numbers to be more than 360 when added up. When it reaches 360, I want it to start over from zero. Instead of, say, E10 = 200 and C8 = 200 ... I don't want the answer to be 400, I want it to be 40.
I have a workbook with 3 sheets. Sheet 1 contains a month of data with Customer Name and Product Code, and quantity shipped (columns A, B, and C). Sheet 2 contains Product Code and quantity produced (Column A and B). In Sheet 3, I have the customer name listed once by running a pivot table against the data in Sheet 1. I need to show the quantity produced for each customer in Sheet 3 but not exceed the quantity produced for that Product Code in Sheet 2 even if the quantity shipped was greater. For example:
Sheet 1
Customer A - 100 shipped of Product Code X
Customer B - 200 shipped of Product Code X
Sheet 2
Product Code X - 150 produced
Sheet 3
Customer A - 100 total
Customer B - 50 total
Customer B would only be allocated 50 as there was only 150 produced and Customer A was allocated 100 of the total 150 produced, leaving 50 to allocate to Customer B.
how to make a summation formula in excel (not simply adding 2 numbers together)? I have one cell that I would enter a number into, and another cell which would specify the limit. So if the first cell A1 = 1, and cell A2 = 50, then the 3rd cell would automatically add up every number "n" plus 1 until n=50. ie: (1+1)+(2+1)+(3+1)+...+(50+1)=result. The limit would have to be flexible, so if I change the 3rd cell to 70 then it would calculate to 70.
View 9 Replies View RelatedI have a MAX formula that searchs a range of cells and then gives the largest number.
How can I set a limit so that even if the MAX number is 200 I want the return to be only 150 maximum.
Example:
A11002005075
I want to be able to search for the largest number but even if the largest number is >150 limit the return to 150.
I have a bunch of city and state data in a range that I am referencing in
VB.
Example: ...
I've spent a fair amount of time creating a financial planning spreadsheet that I'd like to try to sell. My biggest problem is selling it to people and allowing them to use it without them being able to email it to anyone else. My first thought was to code it where a macro will run when the spreadsheet opens that checks if the spreadsheet is being opened on a specific computer and will close down if it is opened on an unauthorized computer. I'm not sure if this will work or how to code it
View 2 Replies View Related have a set of numbers ranging from 1-25 in column A1-A25 in descending order. I want to have a column B1-B25 which outputs numbers in column A up to a maximum of 5.
Eg.
column A
25, 6, 5, 3, 1, 0
I want in column B
5, 5, 5, 3, 1, 0
I have constructed an inventory formula, subtracting Current Inventory (CI) from Required Inventory (RI), to generate a number of how many new products must be Ordered: RI-CI=O. The problem is that if CI exceeds RI, I get a negative number for "O".
Question: How can I structure the formula to give a zero for any sum less than 1?
For example in this formula I typed in WWW as the max:
=SUMPRODUCT(($F$5:$WWW$5>=C2)*1,($F$5:$WWW$5<=C3)*1,ABS($F$6:$WWW$6))
If I try to type in a value higher than WWW it will give me an error. I was just trying to put in an amount that I would never hit within the row.
in the attached spreadsheet I have multiple sheets. On the tab "Tech IDS", column A is named "Name" and column B is the tech ID that is associated with the name in column A. Column B is validated as List=Name. Now under the tab "CAL Form" under Column A I need to type the tech's name. Now under the tab "CAL SHEET TEMPLATE" the name that I typed corresponds with a given cell (i.e. B2='CAL Form'!A2). Notice though that I2 does not give a tech id b/c of DV dropdown list meeting its limit. Look at I68, Bob's id appears b/c he fits within the limits. My question is... how can I still use the list with more names or can I modify the formula (=INDEX(ID,MATCH(B68,Name,0))) to include another Match search?
View 4 Replies View Related