Formula To Add Time When Time Exceeded
Oct 28, 2013I need formula (not VB) that will add time (0:30 minutes to each working shift) when these times are exceeded:
11:00
+0:30
19:00
+1:00
35:00
+0:30
[Code] .........
ADVERTISEMENT
Record Cell Value Each Time Value Is Exceeded
Oct 14, 2007What i would like to do is record a cell on sheet1 in sheet2 when it reaches a certain number i.e 2. The cell in sheet1 changes all the time but sheet2 must not refresh. Is this possible with a formula?
View 9 Replies View RelatedDetermine If Time & Another Condition Is Exceeded
Nov 19, 2007I'm trying to calculate when a waiting time falls outside and exceptable time period. This is based on two colums of data. The first column contains a number from 1 to 5 and the second a time period. (see attached example) in column "C" I need a formula that looks at the value in "A" and if it equals (1) and the time period in "B" is > 00:02 it should show "EXCEEDED". If "A" does contain a (1) then the code stops otherwise it does another loop of "A" looking for a (2) and a time in "B" of >00:10 etc.
View 3 Replies View RelatedFormula To Calculate Time Allotted Minus Time Used And Show Difference In Hour And Minutes?
Apr 27, 2014Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedCalculate Time With If And Formula When Time Passing 12am?
Jul 1, 2012I have a problem here:
Eg.
A B C D E F G H I
1 8 pm 9 pm 10 pm 11 pm 12 am 1 am 2 am
2 8 pm 11 pm
3 8 pm 2 am
I typed a formula : =if(and(c$1>=$a2,d$1
Time Formula: Input The Arrival Time Of A Car
Feb 18, 2007when i input the arrival time of A Car, the time he arrives late appears in column D it should read 15 Minutes. how i can get this time to appear automatic after i have registered the arrival time. A Car due at 19:00 arrived at 19:15. 15minutes late. I would be grateful if you could lead me in the right direction.............
View 3 Replies View RelatedDisplay End Time Automatically Upon Entering Start Time And Time Usage
Dec 19, 2008I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedDate/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm
Jun 17, 2006I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
Working Time And Over Time Formula
Oct 7, 2006d9 is where i enter my start time from a drop down menu and
d10 is where i enter my finish time
what i would like to do is have a formula to work out my total hours work then minu 45min and tell me whats is remainig which is over time
example
i start work and 06:00 and finish work at 15:00 which is 9hours i then remove my 45min break which then give me 1/4hour (0.25 of an hour) as over time
the 0.25 is then timesed by a figure of say 13.4481 which would then tell me that i have earnt 3.362025
and so on eg if i have 0.5hour it would tell me what that work out as.
Formula From Time In And Time Out
Sep 1, 2007Time in/Time out Hrs Worked, Rate is 12.82 per 15 minutes and the amount billed and the total amount due shows up in the last cell.
View 9 Replies View RelatedCalculate Time Between Start Time And End Time?
Feb 7, 2014the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
Add This Number To The Start Time, Factor In Break Minutes And Get To The Projected Completion Time
Mar 3, 2009I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies View RelatedFunction To Be Added On Timestamp Macro To Align Time Of Users From Different Time Zones
Mar 28, 2014I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View RelatedLookup Sunset Time Based Onrecord Date - Incorrect Time Calculated
Mar 22, 2012Consider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
Excel 2010 :: Insert Date And Time In Column Upon Data Change For First Time Only
May 3, 2013I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
Table Which Shows Time Started, Time Finished And Then A Total For Hours That Day, Then That Week
Mar 30, 2009i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
Subtract Start Time From Finish Time Return Hours Worked As Number
May 5, 2006I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
Excel 2007 :: Calculate Time By Time Periods Splitting Productivity?
Mar 8, 2014production01.png
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Excel 2007
Excel 2011 :: Making Time Sheet - Converting Numbers To Time
Jul 11, 2014A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
Time Stamp Macro Tell Total Elapsed Time From When I Started To When I Finished
May 22, 2009I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedMacro Button Disabled When Workbook Date / Time Created Different Or More Than Time Set
Mar 7, 2014I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
Automatically Change Cell (With Time) Color After Time Period Has Passed
May 23, 2008I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
Excel 2013 :: Separate Time From Date To Sort Time Frames Over Multiple Days?
Jun 17, 2014I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
Enter Time As 1800 Get Back Date And Time As 9/9/2012 06:00 Pm
Sep 9, 2012I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies View RelatedAverage Values If Associated Time Of Occurrence Falls Within Certain Time Range?
May 2, 2014Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
Subtract Dates And Find Time Taken From Opening And Closing Time
Jul 31, 2014So I have two dates:
Opening Date: 29/07/2014 13:27
Closing Date: 29/07/2014 14:42
These are formatted in DD/MM/YYYY and HH/MM
I need to subtract the dates and find the time taken from the opening and closing time.
Dynamic Sum Function (number Of Sheets Can Vary From Time To Time)
Sep 8, 2009I need a sum function in A1 of a "Total"-sheet that totals cell A1 in every sheet with a certain color on the tab. The number of sheets can vary from time to time.
Any idea about a dynamic sum function that will do this, in combination with VBA?
Count Function :: Vacation, Personal Time, & Sick Time
Nov 17, 2005I am using the count function for attendance tracking of Vacation, Personal Time, & Sick Time. (Example: = COUNTIF($F6:$CQ6, "V")
I need to be able to do half days. I have tried many different formulas/ways to incorporate the half day scenario even without using the count function with no success.
Converting Normal Time To Epoch Time Format Using Excel
May 18, 2003I'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format.
Is there a function or vba code that I can use in excel to convert the normal time format to epoch time?
I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
Split Time Range Into Hours Distributed By Time Ranges
Mar 5, 2014What I need is a formular/vba code that can divide hours into different time ranges. The picture below shows an explanation.
In example 3 there time range analyzed goes from saturday till monday. Here Sunday should get 24 hours and the time range 23-08 for weekdays is at this point 00-08.
I've tried everything I could imagine to get this one working,