Subtract Set Value From Cell When Another Cell Records A Value Of 1
Dec 6, 2013
I have a problem with a spreadsheet that im putting togeather, and that is , i want to subtract a set value of 7.6 from cell I4 when a value of 1 is counted in cell F10. So if cell F10 counts 2 then another value of 7.6 is subtracted from cell I4. im using a countif function in cell F10 which is counting from a dropdown list which populates cells E22:E418.
I don't want any formula in cell I4 because this cell is required to enter values as required.
View 14 Replies
ADVERTISEMENT
Apr 28, 2012
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
View 6 Replies
View Related
Feb 27, 2013
formula which uses 4 cells
the 4 cells are
Cell B2 - this is a set figure which is the initial base figure - currently set to 43
Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)]
Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total.
Cell D2 is a set figure of 49
The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.
View 5 Replies
View Related
Sep 3, 2007
I am trying to create a formula that will compute a variance between the numeric value in a given cell with the value in one of 3 other cells depending on the condition of the 1st cell. Example: If the Value in cell F4 has a condition defined as "PMR" in cell C4, subtract the value in cell F19 from F4. If the condition is defined as "DBR" in cell C4, subtract the value in F20 from F4. And if the condition is "OTH", subtarct the value in F21 from F4.
View 4 Replies
View Related
Apr 15, 2014
I have been trying for hours now to write a macro that would do the following:
I have a worksheet that looks like this:
15:10:06.3671B56221
15:10:07.1770B56221
15:10:09.3021B56221
15:10:10.1320B56221
15:10:11.3811B56221
15:10:12.1810B56221
15:10:14.6421B56221
15:10:14.6420B56221
15:10:16.2721B56221
15:10:17.5220B56221
with many more rows
I would like to subtract (for column A) line 1 from line 2, then line 2 from line 3....etc the data in column A represents time I would like to have the result in milliseconds and in a new column (D for example)
View 6 Replies
View Related
Mar 11, 2014
I'm trying to subtract the value of a textbox in a userform from a value in a cell, and display this new value in another textbox. An added complexity is this takes place in Visio but communicates to excel to find certain values. I have the following code:
[Code]......
which displays the value of a cell in excel, in a textbox in a visio userform. The excel cell value then changes and I thought that it would work if I were to duplicate this code and run a new sub changing the last line to:
[Code] ....
But I get a type mismatch error on the line.
View 6 Replies
View Related
Oct 26, 2008
I need a formula that will subtract a value entered in A3 from a valued entered in A2 to be displayed in A1.
Also...the Value displayed in A1 must be the value of A2 minus the running total in A3.
Ex...If I type '10' in A2 and type '3' in A3 the value shown in A1 must equal '7'. If I then type '2' in A3 the new value in A1 must equal '5' (this being the value in A2 of '3+2' minus from the original value in A2 of 10)
So..A2 = inputted value , A3 running total of inputed value, A1 differnce of A3 from A2.
Is this even possible? The whole idea is this....if you type a number into a calculator, and then subtract a number from the first number, the calculator then displays the new total. If you then subtract an number from that NEW total, the calculator then displays that NEW total. Thats what I'm trying to re-create in excel.
View 9 Replies
View Related
Jun 29, 2006
would like a very small macro for the following:
Units units remain day 1 day 2 day 3 ... day 13
MACRO
The units are the total number of units that can be bought ( in a game) and these are purchased on a daily basis.
I would like a column " units remain" as units are purchased to just count down auotomatically as numbers are entered into the daily row.
Thus:
11 xx day 1 day 2
Where xx would chage as numbers are entered into day 1-13 ( these will be either 1 or 2).
View 4 Replies
View Related
Feb 3, 2014
I'm building a work effort tracker for employees to record what they do throughout the day and submit it via email, and I've got everything but the "Undo" button working. Right now I have 13 buttons that add +1 to cells C9:C21, and a submit button that copies those cells into an email. What I'm trying to find a solution for is if someone clicks the wrong button, say clicks Inbound Call instead of Outbound Call, which would +1 to C9 instead of C10.
I've read that coding an undo macro button is pretty much impossible, but is there a way to locate the last cell modified by a macro and subtract 1 from it? Or possibly identify the cell contained in the last macro run and -1 from it that way?
View 1 Replies
View Related
Mar 19, 2007
in Cell J32 I want it so when i type in a number it would subtract the number from Cell C32. Is there a formula in which all you have to do is type the number without editing the formula?
View 3 Replies
View Related
May 30, 2014
EX:
1200
1205
1210
1215
Cell with total should contain 15
These are mileage numbers. At the end I need to know the total miles driven as miles are added. I need to be able to see the total miles driven as mileage is added. At the end of the week, I need to see total miles driven.
View 7 Replies
View Related
Jun 27, 2014
I am setting up a workbook for our absence reporting for work and have everything figure out except one thing. I have it where it subtracts points if the points were given over a year ago and also have it to subtract one point for every 90 days of perfect attendance. The problem however is if someone gets 5 points for a no show on January 1, 2013 and then don't have another reportable until June 01, 2014, it subtracts the five points and then an additional 1 since they had over 90 days of perfect attendence and it also goes into negative when employees cannot have negative attendence points. Is there a way to keep the extra point from being deducted and keep it from going into negative? Below is my workbook and the formulas used.
Absence Reporting.xlsx
View 4 Replies
View Related
Mar 22, 2013
Is it possible to subtract a year from a cell that has 2012/2013 in it? For example, if A1 says 2012/2013, how can I get 2011/2012 to display in A2?
View 3 Replies
View Related
Dec 1, 2013
I have a row A through N. In cell A1, have a dollar amount. In cells C1 through N1, I have different dollar amounts. In cell O1, I want to have a formula that will take the dollar figure in A1 and subtract from that amount the total of all the amounts in cells C1 thorugh N1. But I don't know how to write that formula.
Let's say I've got $100 in A1, and then in C1 through N1, I have $2, $3, $4, etc. for a total amount of $94 in cells C1 through N1. I'd like to have a formula in O1 that would show $6.
How to write up that formula in cell O1.
View 1 Replies
View Related
Oct 2, 2006
I wish to have a column with say 100 in it as that will be the initial stock levels
I would then like the next column to be blank so that when you enter say 25 (the number of stock taken away) the third column will show the new number of 75.
Simple? well here is the tricky part
I just want those three columns so the blank one in the middle will remain blank after it has been used so for example
on monday we sell 25 pencils and type 25 in the field and the new total is 70
on tuesday we sell 40 pencils and type (in the same field the 25 was put in the day before) 40 and the total will show up as 35.
View 4 Replies
View Related
Jul 13, 2009
I have is a cell with a begining balance and a cell witha current balance.
I also have a column in which each expenditure will be placed ina cell in that column in sequential order.
What i want to do is take the value in the first cell of the expenditure column and subtract it from the begining balance and the place the result in the current balance.
But after the first cell i will need to subtract each value from its previous value to continue counting down so to speak.
I am at a loss on how to move the last value which will also be the lowest value in the column to the cueent balance cell.
View 13 Replies
View Related
Feb 18, 2014
I need a macro to identify the largest value across columns I2 - AS2. Once found, I need to replace the value with value found minus the value in BQ. The final step would be to highlight the cell that was changed across columns I2 - AS2, then move to the next row and do same until I reach the last row in the worksheet. The number of rows vary each day but the columns do not.
I have written the attached code, which identifies the largest value in the first row, but I don't know how to replace the value found with the new value and then move to the next row until it reaches the final row for the day.
In the attached file, my largest value sits in AC2. That value needs to be replaced with 486.17 (1,175.37 - the value in BQ2 of 689.20). The cell should then be highlighted so I can quickly identified what cells have been changed.
View 3 Replies
View Related
Oct 31, 2008
I d like to find a method with which I can delete records from E starting from E2 that have 0 or even blanks with a macro.
View 9 Replies
View Related
Oct 31, 2008
I d like to find a method with which I can delete records from E starting from E2 that have 0 or even blanks with a macro.
View 9 Replies
View Related
Jan 8, 2010
I have an excel file that gets records from access database. I have a field named "Class" in column C which starts at row 4. I want to filter the records in such a way that only those records with Class equal to whatever value I put in cell B2 will be shown.
For example:
A B C
REPORT
Filter Class: _______
ProjID Name Class
001 Project A 4
002 Project B 4
003 Project C 4
004 Project D 8............
View 9 Replies
View Related
Jun 5, 2008
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View 4 Replies
View Related
Mar 2, 2014
I need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
View 2 Replies
View Related
Aug 10, 2014
I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).
Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.
View 7 Replies
View Related
Apr 25, 2014
Book1 and Book2 are workbooks that I have modified in order to protect private information.
Book1 will have 11,000 records (my example Book1 has only 100). I need to rearrange Book1 such that it looks like Book2. Book2 has 20 complete records from Book1 combined into one single row, and my example Book2 has populated 3 rows only (3 rows x 20 records, making 60 records now appear on 3 rows only).
Macro for getting Book1 to Book2? 11,000 records in Book1 will take a lot of hours to transform into Book2 unless a macro can do the job for me.
Book1.xls
Book2.xls
View 5 Replies
View Related
May 7, 2006
example of a database user form that will allow me to list records in a sheet as well as search for records in a sheet. I know excel has a built in feature for this but it is menu driven and I need something that is button driven and will allow me to resize the form layout. I was not able to figure out how to do that with the built in form.
View 7 Replies
View Related
Jan 26, 2006
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies
View Related
Aug 16, 2013
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
View 4 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Apr 18, 2013
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
View 1 Replies
View Related
May 6, 2013
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
View 4 Replies
View Related
