I have a working week that starts at 07:00 on a Monday morning and finishes at 14:30 on a Friday afternoon.
For planning purposes I need to know at any given point how many working hours are left. The reason for this is so that I can multiply that figure by the amount of Engineers available which will give me the amount of Man Hrs left in the week.
For example - if it is 11:00am on the Tuesday, how many working hours are left ....
I've tried a number of examples but I can't seem to get it to work. the desired results in column C.
10/17/11 12:00 PM10/17/11 1:00 PM1:0010/17/11 12:00 PM10/17/11 9:00 AM(3:00)10/17/11 12:00 PM10/16/11 9:00 AM(27:00)
Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
I have three cells... A1= entry time & H1 exit time...both are formated as such Custom #0":"00 so i don't have to enter the colon with every entry and exit time... my issue is that i want the third cell to count the minutes in cell A1 & H1...
View 9 Replies View RelatedI saw this answered somewhere on here but really didn't understand.
I'm trying to set up a sheet for my hours worked for the week.
I have the total per day in H2 through H6 In I2 through I6 I have an accumulative total for the days, so assuming I work 8 hours a day, I2 would be 8:00 I3 would be 16:00 I4 would be 24:00.
In J2 through J5, I'd like to have the weekly accululative worked hours subtracted from 40 so that the total is what I have left work until I hit 40.
Here's a simple one guys. How do I subtract 7:30 AM from 4:00 PM to give me 8.5 hours? At the moment it returns either 8:30 AM or (formatted Number - General):
0.3541667
I need 15 minutes removed from a difference in time, if the time span falls over 9:00 am through 9:15 am.
I'm inputting time like 8:30:00 in A1 and 10:30:00 in A2, then calculating the difference in A3 (2:00:00). Is there a way to remove 15 minutes from that 2:00:00, since it falls over 9 to 9:15?
I am trying to subtract 45min from the time 00:05, but the result i am getting is 0:40 which is wrong.
I am using below formula.
=TEXT(ABS(B3-$A$3),"-h:mm")
Actual timeTime minusResults00:0500:45-0:40
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55
In E1 will be the arrival time, 23:59
In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
=IF(E1="NA",0,IF(E1="n/a",0,E1-C1))
I have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
I am trying to calculate the length of time of employment. I am looking for a formula to subtract the date of hire from the date of termination.
My current example is:
5/24/12 - 11/3/10 = 568
There is a problem with my formula as the answer of 568 is currently meaningless. How do I convert this?
Using Excel 2007
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
View 5 Replies View RelatedHow can I add/subtract time entered as 1830 to give a decimal value?
Start=1830
Finish=2000
Time between = 1.5
Also, how can I convert time as 1830 (24hr) to 12hr time? ie. 0630.
I am trying to take the year from today's date then subtract away a date from a referenced date in a separate workbook. Then I want to put this result into an IF statement. For example if the result is between the number 1 and 4, display 1, if the result is between 5 and 9, display 2, etc. Right now, I'm simply trying to reference the separate workbook for the date and subtract that from today's date, but I'm stuck because I only get the date's serial number back.
View 1 Replies View RelatedI am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
2012 02 17 11:18:59.050|081,999999999999~999999999999
2012 02 17 11:18:59.550|082,MCTO05222CZ0~999999999999
2012 02 17 11:18:59.566|082,1
2012 02 17 11:19:00.144|083,MCTO05246CK0~999999999999
2012 02 17 11:19:00.160|083,3
I am trying to subtract 12 business hours from a date/time stamp. It has to be during working hours however which are 8AM - 5PM, Monday-Friday.
For example if my value is 6/23/2008 9AM
Subtracting 12 business hours would give me 6/19/2008 3PM.
formula to work out a variance between two times
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1
i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
I have two worksheets which talk together and one of them gives a time stamp using some VBA code
=format(Now(),"dd/mm/yyyy AM/PM"
in the other spreadsheet I have the Now() function which has been working fine. However, when another user went into the spreadsheet went in it, my calculations between the two dates now error. I am presuming its because of the now function not having some formatting defined so is there anyway of changing this value? The cells-formatting will not obviously work as excel is getting confused between the two time types even though the format looks fine. To help the calculation that is messing up is
=IF($L7="","N",IF(DATEDIF($L7,$J$1,"d")>10,"N","Y"))
whereby L7 is the imported timestamp and J1 is now(). The calculation is to show which accounts become inactive after 10 days.
After reading up on the internet I know that to get round the problem I have to make sure that everyone is using the same regional settings. But I just have a couple of questions:-
1. I can understand the date calculation not working on the other persons machine, but when I went back to look at it I was getting the same error. Even though the file is shared, how come my settings didnt 'overwrite' and how come i was affected?
2. Is there a way to make the code work regardless of who opens it in whatever region? Im not sure if there is a fundamental problem but I cant rely on everyone having the same settings because I know that this will cause problems in the longterm.
3. Using the formuale Now(), is there no way of forcing that to a uk date format to stop the errors?
I m Trying to add some features to it and run into an issue. Here are the fields we are working with!
A1= 13:30:00 17/12/2008
(in other words 1:30pm on date given) - Need to know proper cell number format!!
B1= 23:00:00
(this represents 23 hours) - format for cell is [h]:mm:ss
C1= Unknown function
(This field is my problem!!)
Answer here SHOULD be "14:30:00 16/12/2008"
I need a function for C1 (using A1 and B1) that will give me the time and date 23 hours earlier or however many hours:mins:secs is specified in B1! Also need to know what number format to use for both A1 and C1
Using the attached doc, and its legend tab, I need the following columns corrected as I am seriously tripping up on formats vs inputs for outputs.
1.) Column "N's" result based on the duration output of the preceding column "M" is:
<=4 = 40
5 = 30
6 = 20
>=7 = 10
2.) Column "Q's" result based on the duration output of the preceding column "P" is:
<=18 == 40
>=19<=24 == 30
>=25<=48 == 20
>=49 == 10
The legend tab shows the info as well.
I am using excel 2003 and I am trying to subtract 20 days from the date in cell A3 in order to give me a date for me to order materials. However all I get is #NAME? in the cell.
View 4 Replies View RelatedIf I have a date in Cell A1, what formula do I need to put in cell B1 to subtract 6 months.
eg If A1 = 14/08/2007 I want B1 to read 14/02/2007 and not 12/02/2007 which it reads when subtracting half a ywears worth of days
Ihave this exel sheet i nedd function to write the starting date and time immediatly after i enter the name in the last colume ineed from exel to write the date and time emmideatly if the case is (done, cancelled ,or rejecteted)if the case is (select status )i want the cell empty but if the case is (pending)iwant to the program to calculte the deffirence between the ClosingDatetimee(which written by the program)and the delivering date(which entered manually by user)
View 9 Replies View RelatedHere is what I have:
A B C D
Date ReceivedApproved DateDenied DateTurn Time
1/1/14 1/13/14 9
Turntime is calculated with this formula:
=IF(A4<>"",IF(COUNT(B3,C3),NETWORKDAYS(A3,IF(B3<>"",B3,C3)),""),"")
What I need is to not count the first day it is received in the calculation for the Turn Time. So in this instance I need the Turn Time to say 8 instead of 9. If I just subtract a 1 then I get an error if the Approved Date or the Denied Date are not filled in yet.
How can I change the ....
View 14 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?