I need 15 minutes removed from a difference in time, if the time span falls over 9:00 am through 9:15 am.
I'm inputting time like 8:30:00 in A1 and 10:30:00 in A2, then calculating the difference in A3 (2:00:00). Is there a way to remove 15 minutes from that 2:00:00, since it falls over 9 to 9:15?
Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
I have a formula that calculates only seconds and frames. The frame rate is 75 fps (0-74).
e.g., 49.50 is 49 seconds 50 frames. It will not parse Minutes.Seconds.Frames, e.g., 1.49.50 is 1 minute 49 seconds 50 frames.
What my existing formula does is converts the number to all frames then converts the answer back to seconds and frames.
I need this formula to include minutes in its calculation.
A copy of the spreadsheet is here: ...
How to create repeated time frame within a column like example stated as below:
Time 9:45AM
10:00AM
10:15AM
9:45 AM
10:00AM
10:15AM
9:45 AM
10:00AM
10:15AM
I need to be able to calculate the actual number of days worked for an employee over a specific date range. I have a data sheet containing employee, transactions, and date of transaction (date only, does not include time). The actual number of days worked may fluctuate due to time off or holidays, so I need to be able to calculate this individually by employee. For example, with columns Employee, Transaction, & Transaction Date:
123 ABC 07/01/2009
123 ABC 07/02/2009
123 DEF 07/02/2009
123 GHI 07/02/2009
123 ABC 07/03/2009
123 ABC 07/07/2009
123 DEF 07/07/2009
123 ABC 07/08/2009
123 ABC 07/09/2009
etc....
Should return 4 work days for employee 123 over the date range 07/01/2009-07/07/2009
I am trying to do a timesheet spreadsheets that lists employees clockin and clockout times
Name Start End num hours worked
Cory 02:00 04:00 2
Jack 23:00 05:00 6
Fred 10:00 17:00 7
and then go through the list and and count the number of employees in a certain range.
time range number of employees working
05:00-06:00 1
06:00-07:00 2
07:00-08:00 6
08:00-09:00 5
09:00-10:00
10:00-11:00
11:00-12:00
12:00-13:00..............
I have three cells... A1= entry time & H1 exit time...both are formated as such Custom #0":"00 so i don't have to enter the colon with every entry and exit time... my issue is that i want the third cell to count the minutes in cell A1 & H1...
View 9 Replies View RelatedI saw this answered somewhere on here but really didn't understand.
I'm trying to set up a sheet for my hours worked for the week.
I have the total per day in H2 through H6 In I2 through I6 I have an accumulative total for the days, so assuming I work 8 hours a day, I2 would be 8:00 I3 would be 16:00 I4 would be 24:00.
In J2 through J5, I'd like to have the weekly accululative worked hours subtracted from 40 so that the total is what I have left work until I hit 40.
Here's a simple one guys. How do I subtract 7:30 AM from 4:00 PM to give me 8.5 hours? At the moment it returns either 8:30 AM or (formatted Number - General):
0.3541667
I am trying to pull a specific time frame of data from worksheet, in a large file, into another active workbook. A fiscal month. I don't know how to at all. I figure it should be a And IF and Vlookup but do not know how to execute it all.
View 1 Replies View RelatedIm trying to count people working during times of the day. They work shifts from 8am to 9pm. I need to know at each 30 minute interval of the day how many are working. IE at 12:00 or say 13:30 I need to know how many are working. I also need to be able to account for people that are sick. IE If a person works during the day I wouldnt count them as sick at night.
Im data is set up like
Column A agent name
Column B agents start time
Column C agents end time
Column D holds two variables either sick or support.
I have found a thread that counts the people working but doesnt account for the sick or support variables. I didnt link that thread as I thought it went against the rule "STATE WHAT YOU WANT TO DO, NOT WHAT YOU THINK YOU NEED TO ACHIEVE IT "
I am trying to subtract 45min from the time 00:05, but the result i am getting is 0:40 which is wrong.
I am using below formula.
=TEXT(ABS(B3-$A$3),"-h:mm")
Actual timeTime minusResults00:0500:45-0:40
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55
In E1 will be the arrival time, 23:59
In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
=IF(E1="NA",0,IF(E1="n/a",0,E1-C1))
I have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
Rather than manually typing the time in 5 min increments across a range of cells, i want to have a start time, then the next cell add 5 mins. EG: 09:00 next cell 09:05 and so on.
View 7 Replies View RelatedIn cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
View 5 Replies View RelatedI have a working week that starts at 07:00 on a Monday morning and finishes at 14:30 on a Friday afternoon.
For planning purposes I need to know at any given point how many working hours are left. The reason for this is so that I can multiply that figure by the amount of Engineers available which will give me the amount of Man Hrs left in the week.
For example - if it is 11:00am on the Tuesday, how many working hours are left ....
How can I add/subtract time entered as 1830 to give a decimal value?
Start=1830
Finish=2000
Time between = 1.5
Also, how can I convert time as 1830 (24hr) to 12hr time? ie. 0630.
I've tried a number of examples but I can't seem to get it to work. the desired results in column C.
10/17/11 12:00 PM10/17/11 1:00 PM1:0010/17/11 12:00 PM10/17/11 9:00 AM(3:00)10/17/11 12:00 PM10/16/11 9:00 AM(27:00)
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
2012 02 17 11:18:59.050|081,999999999999~999999999999
2012 02 17 11:18:59.550|082,MCTO05222CZ0~999999999999
2012 02 17 11:18:59.566|082,1
2012 02 17 11:19:00.144|083,MCTO05246CK0~999999999999
2012 02 17 11:19:00.160|083,3
I am trying to subtract 12 business hours from a date/time stamp. It has to be during working hours however which are 8AM - 5PM, Monday-Friday.
For example if my value is 6/23/2008 9AM
Subtracting 12 business hours would give me 6/19/2008 3PM.
formula to work out a variance between two times
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1
i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
I'm using excel 2010 on a pc. I need to create a calender. So far I have been using the tutorial for the pop up calender. The result I'm looking for is to set up a specific time frame and have the calender provide the "due" date. I would like the due date to exclude weekends and holidays. Would I be able to do this with the pop up calender?
View 3 Replies View RelatedI got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View Relatedthe vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies View RelatedI am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View Related