My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
I have three cells... A1= entry time & H1 exit time...both are formated as such Custom #0":"00 so i don't have to enter the colon with every entry and exit time... my issue is that i want the third cell to count the minutes in cell A1 & H1...
I saw this answered somewhere on here but really didn't understand.
I'm trying to set up a sheet for my hours worked for the week.
I have the total per day in H2 through H6 In I2 through I6 I have an accumulative total for the days, so assuming I work 8 hours a day, I2 would be 8:00 I3 would be 16:00 I4 would be 24:00.
In J2 through J5, I'd like to have the weekly accululative worked hours subtracted from 40 so that the total is what I have left work until I hit 40.
Here's a simple one guys. How do I subtract 7:30 AM from 4:00 PM to give me 8.5 hours? At the moment it returns either 8:30 AM or (formatted Number - General):
I need 15 minutes removed from a difference in time, if the time span falls over 9:00 am through 9:15 am.
I'm inputting time like 8:30:00 in A1 and 10:30:00 in A2, then calculating the difference in A3 (2:00:00). Is there a way to remove 15 minutes from that 2:00:00, since it falls over 9 to 9:15?
I am trying to work out the response times to an event that my staff attend ( such as a fire alarm)
In C1 will be the time the event was called in, 23:55 In E1 will be the arrival time, 23:59 In F1 I want to show the time taken to arrive on site (response time)
This seems straightforward until the arrival time goes into the next day, such as 00:05 and this is when I have the problem
To make it more complicated, sometimes there is no need for an arrival time to be entered for some events ,with the end user leaving it blank or putting "NA" or "na" etc into the cell
I have tried the below formula which works to a point but leave me with an ######### error if the time is after midnight
I have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
I have some intraday date that looks like this, hope the formatting comes thru when i post this....anyhow, the second column is TIME (ie 15:25 15:30, etc...5 minute time intervals for SP500 stock data. I want to have a column that simply subtracts row 2 column b (time column) from row 1 column b.....when i do this i get a #value....I know this must be possible to get a result i need....ie 15:30 - 15:25 = 5
Do i need to reformat the TIME column into something different? ....
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
I have a working week that starts at 07:00 on a Monday morning and finishes at 14:30 on a Friday afternoon.
For planning purposes I need to know at any given point how many working hours are left. The reason for this is so that I can multiply that figure by the amount of Engineers available which will give me the amount of Man Hrs left in the week.
For example - if it is 11:00am on the Tuesday, how many working hours are left ....
I have imports with several values listed as :00. I am unable to adjust the import or export to make these values 0:00 as they should for calculating. How can I convert the :00 values to 0:00? Its literally just like I need to add a 0 zero in front of the colon ":". This is the case with anything imported that is less than 1:00 minute. I have :55 that should be 0:55 and so on. I have tried re-formatting for different time values, tried various formulas that were listed in the forums.
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1 i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.
We created a SQL Server view of this column and other columns of info joined together from several tables.
Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.
Excel 2010 displays each of the columns in our view.
The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.
We want to calculate the average time in this column.
We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.
We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.
We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.
how to calculate the time between two dates in years and quarters (represented in .25 increments). I would round down on the .25 increments (3 months) if not fully surpassed.
See attachment on what it should look like. C2 is my calculated column.
The only change I made was to change the "Sheet1" to "Journal" to match the worksheet name in my workbook.
As you close and reopen the workbook, the timer should start with =NOW() in A1 (formatted as "HH:MM:SS") and count up with the current time until you close the workbook.
I use Excel 2010, could that be the problem, that I copied a VBA code for an older version of Excel???
Question: What exactly is a regular module, do I use Module 1 for the first portion of the code or place it in ThisWorkbook?
I have a problem with adding time values. The idea of my spreadsheet is to count time worked, and then calculate any variance from the normal shift length (i.e. 7h 30m). My formulas work fine until I work less than 7h 30m in a shift.
Example:
A1=start time A2=end time A3=IF(A2="","",MOD(A2-A1,1)) A4=IF(A3="","",(A3-(TIME(7,30,0))))
When the duration is over 7h 30m, A4 correctly returns the value of extra minutes. But when the duration is under 7h 30m the return is #####.
PS A1:A2 are formatted in a custom format hh:mm and A3:A4 are formatted as h:mm, and I'm using Win7 & MS Office 2010.
I've been trying to get a graph that looks like the image below for a while now and can't seem to get it to appear how I want. I am looking to duplicate it exactly, but the issue I'm having is getting the individual bars to be separate and appropriately spaced.
I'm doing a study of when people are most productful in their day. I just need to count how many units a person made within say 4 hours of starting work.
I have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".
