I am trying to Sum all the values in Column G that have the same month ( date format is mm-dd-yy) in Column B but am not sure how to do this. I have tried the Vlookup but that only returns one value.
View 6 Repliessee attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
I have a summary column that is dictate by month. Each month I want to look at the column to gauge various data points against one another. All my data points are collected from tables that are headed by dates. What I would like to do is set up a formula that would reference the current date (=today()) against the array that contains the same date. Once there is a match it will pull the appropriate data. Here is what I am using right now:
=IF(MONTH($I$4)=MONTH('Lease Expirations'!H12),'Lease Expirations'!H41,IF(MONTH($I$4)=MONTH('Lease Expirations'!I12),'Lease Expirations'!I41,IF(MONTH($I$4)=MONTH('Lease Expirations'!J12),'Lease Expirations'!J41,IF(MONTH($I$4)=MONTH('Lease Expirations'!K12),'Lease Expirations'!K41,IF(MONTH($I$4)=MONTH('Lease Expirations'!L12),'Lease Expirations'!L41,IF(MONTH($I$4)=MONTH('Lease Expirations'!M12),'Lease Expirations'!M41,IF(MONTH($I$4)=MONTH('Lease Expirations'!N12),"")))))))
but it has nested function limitations (I can only go out about 7 months).
For a banking spreadsheet to monitor monthly transfers:
COLUMN A - Date of transaction (entered manually)
COLUMN B - Description (transfers entered manually as "T")
If value of cell in COLUMN A is within current month, then Count corresponding cell in COLUMN B when "T"
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
I'm looking to find like values in Column A. If there are like values, I'd like to add their row's values from E to F.
I would use the =if(or( function but the amount of like values in A differs from 2-6.
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
To best explain my problem I will use this example
Dog 2 400
Cat 4 300
Car 1 200
Dog 7 800
Car 8 900
That data is in the top of my worksheet, and I would like to be able to find all the dog values then reference the 2nd and 3rd column and add all the dog values up and then post the totals in a area below like this
dog 9 1200
cat 4 300
car 9 1100
Stipulations
1) there are different amounts of values, there may be 1 dog value or 10 dog values, I would like the program to recognize the dog values and add the corresponding values.
2) dog, cat, car values are not the only values, there may be others like "tree, apple" but are not in use. So only values in the top of the spreadsheet get referenced to the bottom part.........................
I m trying to write a formula for my financial model. If anyone can take a stab at a solution. I'm trying to write a formula that will equally distribute revenue either over the next 1 month, 2 month or 3 month period depending on size of the deal.
Details:
Sales will fit in 1 of 3 categories. Less than 25k; between 25k & 100k; greater than 100k.
- if under $25K, recognize in next month (month N+ 1)
- $25K-100K, recognize in two equal parts in months N + 1 and N + 2
- over $100K, recognize in three equal parts over 3 months
N + 1, N + 2, N + 3 ...
i have a worksheet which i use to maintain complaints of service stations.
i need to match values in 4 columns if they are the same the fifth column should display a text.
since i log compliants, if the same complaint reoccurs again the fifth column should say return job.
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx
Using the code below I am able to copy the the data from column f to column e and match it to the row of the matching data in b. See attached workbook.
[Code] .....
I am really new to excel and am trying to figure out how to get the none matching elements in column B(where no match is found with column F) copied to column L ...
Attached File : non-matching.xlsm
A formula that would compare any value in column 1 to any value in column 2 to see if they are a match for each other. If a match is detected it would be indicated in column 3:
A1B1C1
1221445343
3342111454
4534312214
1145433421
1144511456
I'm trying to store a value in ColumnA Row1 Sheet1 in a variable and check to see that value exists in Sheet2. If the value is in Sheet2, I want to copy the information in Row1 Sheet1 and paste it in the row of the matching value in Sheet2. I need to then check the value in ColumnA Row2 Sheet1 and check again for it in Sheet2 and I need to continue to do this until the data ends in Sheet1.
Code:
Dim x As String
Dim y As String
A = 2
B = 2
[Code]...
The above is the code I've been trying to use. It has two flaws:
It won't let me copy into the row of Sheet2 (not a big deal though)The rows get all mismatched and it doesn't actually search ALL the rows in Sheet2 so it misses some of the values that actually DO match (the big issue) I've racked my brain for hours trying to figure it out using the above method and I think I've reached the point where I'm overthinking it way too much. I also found the "Find" method but I couldn't quite teach myself how to use it.
I have two columns of data, in A and B. Column A has about 500 rows of numbers, while column B only has about 150. All the numbers that are in column B exist in column A.
(Column B is a monthly product production list, while column A is a "master list" of all products that can be produced)
I need someway to match the data in Column B with Column A so they line up.
I was thinking something like this, but don't know how to do it:
"Where value in column A = value in column B, then copy this data into cells D1 and E1" (so the values line up next to each other)
is this possible? Maybe with some advanced filter? Or a macro? It seems kind of silly, but I just need to have the data next to each other without doing it manually.
How can i add a value suppose 10 which is in cell A2, now i use vlookup to search
lookup_value=A2(i.e.10),
Table_array=column c,
Column_index_number=1 and
range_lookup=0
so when vlookup finds the matching value the sum should be 10+10=20
also it should match -10, so that sum will be 0.
In the attached example I paste in a report from another system into Sheet2 (rough data layout in example).
In column B in Sheet1 I have tried using Match and Index formulas to try and return only the Local Shipment figures from on Sheet2 for each staff member.
The issue i'm having is that the data in Sheet2 can change based on how long the report is run. There is also no way I can change the way the raw data is set out in Sheet2 as it's an external system.
Basically i'm looking for a formula that isn't locked down to certain cells and can work with data moving up and down columns at different stages. The key data never changes from column A and F in sheet2. But what does change is whether each person has one or both of Sales & Local Shipment data in the reporting. This obviously changes based on what is completed each day.
So I need a formula that matches the persons name in column A in Sheet1 with Column A in Sheet2, then looks for the first mention of 'Local Shipment' below it and returns the cloumn F value which is in the same row as 'Local Shipment'.
I have a spreadsheet where I have two different sheets; a summary sheet, and a more detailed sheet that lists out items on invoices.
The summary sheet shows invoice number, amount invoiced, and total paid against that invoice.
The detailed sheet goes into more details, and shows whats on the invoice, and any reasons for them not being paid.
I want a formula on the summary sheet that picks up the invoice number from the details sheet, and then brings through the figures. The details sheet may have more than one line for an invoice number, so the formula needs to be able to add up too.
I've tried a vlookup, but it doesnt seem to work, and I dont think it will do what I want.
We have a table that records payment dates and amounts ... and it categorizes how the payment was made. See attached file to understand the process.
Column A records the payment date. Two or more payments can be recorded for the same date!!!
Column B records the amount of payment.
Column C records the method of payment (OL or LB or CC or CK).
Here's what we need:
On a given date (cell J4), we need to match any dates in Col A ... and we need to SUM all payments that match that date .... and the SUM needs to be based upon the method of payment (OL or LB ...) and values stored respectively in E4,F4,G4,H4 (or left blank if no date match).
ColA
there was a dog that jumped over
there was a dog that jumped over the fence
Everything is in ColA. We are on excel 2007. We need to highlight these two are duplicates based on matching the first 40 characters.
Currently I have 3 Columns. The first column is a list of phone numbers that have confirmed and bought our product. The second column holds the phone numbers of the initial leads that we generated. And the third column is the keyword that the lead used to find our website.
What I need to do is match the phone number from Column A with the phone number of Column B then record the frequency of the keyword that was used to produce that lead.
I've attached a screen shot with the first few rows of my table (Nearly 1000 in total) as well as an example of what I imagine the result looking like.
First Few Rows Of The Table:
Excel-Keyword-Matching.jpg
What I Am Looking To Do:
Keyword-Frequency-Complete-Example.jpg
I have a worksheet that has a compilation of reports, each of which has multiple columns that aren't necessarily organized in an Excel-friendly way. However, the first column contains a list of "name" headings (titled "Name") and the second adjacent column always lists the actual name right beside it. Similarly, each person has a value heading in the first column (titled "The Value") and the actual value in the second column. What I would like to be able to do is have Excel search for the Name heading, paste the value in the adjacent column (the actual name) in a cell in a new worksheet, then search for "The Value" and do the same thing in the column adjacent to the one where the actual name was copied. The catch is I need Excel to do this and then search again for "Name", skip it, and start again with the first part of the procedure until all names and their associated values are matched. how to do something like this in VBA?
View 6 Replies View RelatedI have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
I have a sheet that returns 4 numbers where 2 will match. Is there a command that will return that matching value?
For example:
cell 1 = 5
cell 2 = 9
cell 3 = 4
cell 4 = 9
something to return the value 9
I have in Sheet 1 a list of product codes (that should be only numbers, i.e: 1010) on column A, product description on B and a sales column on C.
On Sheet 2 I have on column A I have in the same cell a letter "C" the product code and the product description(i.e.: C1010 Onions). On column B I got the sales total. ( I dont care about the letter "C" it can be deleted)
I would like to use a VBA code to find the same product codes between sheet 1 & 2 and copy the sales total from sheet 2 to sheet 1 when the product code is the same.
I am trying to automatically populate all the values matching a certain criteria. i.e.
I have following Data
CodeColourUse
1Red Dress
1Yellow Car
1Blue Paint
2Blue Car
3Blue Dress
3Red Paint
3Yellow Car
Now all in other sheet is to , if i just change a write a code , only related entries to that code must populate.
For example in Sheet 2 if i enter code = 1, following data should populate
ColourUse
Red Dress
YellowCar
Blue Paint
if i enter code = 2, the following data must populate
Colour Use
Blue Dress
Red Paint
Yellow Car
I have used combination of IF and VLOOKUP function but it didn't work well.