I have a spreadsheet in which column "c" represents a department: 01, 02, 03, etc. every time this value changes I want to do a subtotal. The code I've come up with thus far is:
Sub Subtotal()
Dim lrow As Long For lrow = Cells(Cells.Rows.Count, "c").End(xlUp).Row To 2 Step -1 if cells(lrow, "c") cells(lrow-1, "c" then range Selection.Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(4, 5, 6), _ Replace:=True, PageBreaks:=False, SummaryBelowData:=True ActiveSheet.Outline.ShowLevels RowLevels:=2 End Sub
But, I can't figure out how to get set my range to include all the data that pertains to a department to do the subtotal.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
I am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
in column B of sheet1 i have every 3rd-4th row a name. i need to copy the name and the the data on the row below the name to sheet2, the list of names can be min 2 max 30.
so sheet 1 has row 14- name in column B and C. in row 15 in columns d:z data for the name.
i need to copy this to one row in sheet 2 copied for each name up to 30.
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
If I have a table as noted below with the following assumptions:
- this table will likely grow - the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted. - Macros aren't an option as this sheet needs to be macro free.
A B C 1 Item Calories Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
I am looking for a ranking formula that will pull the data from the first column based on the ranking of the second column so that the end result will look like this 1 S 2 F 3 D As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the hundreds.
How to get the Column Alphabet based on the Data it contains or the Column Heading using VBA?
Is it possible to get the Column Alphabet using any Macro or any function that within a Module it can always take the New Column Name during Execution..
Example: I have certain Columns where I have Yes and No Tick using the Wingdings P and Y.. Now these Columns are alternately Placed and there are six columns in all and they are spread over 12 Columns as the Alternate COlumns is reserved for Manual Entries.
Now I intend to increase the Manual Entry Columns but the problem is that every time I do that I need to make changes in my VBA Code.
Is it possible that even when the Columns are Inserted or Deleted in between before or after these columns I dont need to change the Explicit references by changing some approach.
I am not fuly conversant in VBA but use it whenever things are not completely feasible with Formulas AFTER GOOGLING.
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) If Not Intersect(Target, Range("X3:X13")) Is Nothing Then ' You can Change the range here Cancel = True
[Code]....
As you can see the Ranges are Alternately Placed and there are about 6 such Columns with the above TICKS..
Now, how do I keep it FLoating so that even after changing the COlumn Location it does not need to get Updated i.e. X and Z Column Alphabets..
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P) phone (Q) primary phone (R) col S col T col U
I have been reading and searching on how to get around Excel's limit of 3(or 4) conditional formatting rules with VBA.
I have a pretty good grasp of what the code is telling the system to do, however what I am not understanding is how can I have the Code check multiple sets of columns?
ex Columns A,B and C Rows 1:100 need to be checked if they are between a particular range and clolums D,E, and F need to be checked against a completely different set of criteria.
I tried cutting and pasting the Sub, changing the Range values and the conditions, but it always errors out.
I would like to name a range based on a row number and a column number. I have found the row and column number using this code, but I can't seem to get the rest right.
Sub LastRowCol() Dim intLastRow As Integer Dim intLastCol As Integer Dim ws As Worksheet
I am trying to write a formula with some variables passed into it. i want to sum up part of a column based on a date range (i've got the range already).
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
i have a table in excel with 36 rows and 36 columns i.e. 36x36=1296 individual cells. Columns and rows have headers/labels i.e. 36 rows with row label headings and similarly 36 columns with column label headings. I would like to automatically create unique cell names for the 1296 cells based on where the columns and rows intersect using the row and column labels. The cell name format I would like to create is [ColumnLabel_RowLabel].
I've manually created the cell names in the attached file as an example of what i would am seeking (i've greyed the cells that I've done this for).
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
