Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
I have a list of research material based off postcodes, travel time in those areas and what I want to do is rank the the travel times in those ares within a third column.
What I have so far in design terms is this:
Origin Base
Time
Time Ranking
AB10
00:10:00
AB10
00:12:00
[Code]...
So basically I'm trying to have column c look at a and check for the lowest value in b against all other rows that have the same constant value e.g. AB10 in column a. Then to distinguish them somehow for example marking the first '1'. Also then to be able to do it for second and thrid ranking value.
What do people think? Is this doable? I think maybe a min if array but keep tripping on the fact that the ranges are all locked in a single column and inconstant sizes.
The data comes in this format and is quite large so manual editing would be a last resort.
I'm having a little trouble figuring out what formula to use for situation. I have 5 columns of information.
Column A = School # of current school
Column B = School 1 Name
Column C = School 2 Name
Column D = School 3 Name
Column E = School 4 Name
What I want to do is in Column F to look through a row of information and find the current school.
So:
If A="1", pull from B
If A="2", pull from C
If A="3", pull from D
If A="4", pull from E
I tried doing a VLOOKUP table, but I think I'd have to do one for every row, but I could be wrong. I also thought of INDEX(MATCH), but I couldn't quite figure it out.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
I got it when I click on the cell it loads the userform but it is populating with row data instead of column data.
I would like when I click on for example cell T4 and the userform pops up to see the textbox data going down the rows instead of across which is is currently doing.
so clicking on T4 brings my userform up filled in with information from
T5 and U5
T6 U6
T7 U7
T8 U8
T9 U9
I have when I click on the cell T4 column
label amount receipt
electricity 384.00 ZgHl2V
This way I can change amount or receipt and update my worksheet.
VB:
Private Sub UserForm_Activate()
Dim r As Long
r = ActiveCell.Row
[Code].....
I have stored production data in Column A. I want 5 data randomly pulled from that column with click of a button. Would this Happen?. I have attached an excel sheet.
View 2 Replies View RelatedI'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies View RelatedIs it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
Here is what i'm working with:
http://img90.imageshack.us/my.php?im...uestionas8.jpg
what i want it to do is pull out the stuff in column C and put it in column F. But i don't want it to duplicate it at all. So for instance in this case, submarket 1 would be cary-morrisville-apex / submarket 2: northwest wake / submarket 3: north wake etc.
would this involve a VLOOKUP function but an if then function as well? I'm not really sure how to go about it.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
I have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).
When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
I am trying to write a formula that shows the best grade for each each student and the subject in which
that grade was achieved.
In a previous post i was shown how to identify the highest grade
MAX(IF(A$3:A$34=A7,C$3:C$34))
I hit CTRL, SHIFT & ENTER to activate the formula - Result in column E
However, I also want to identify the subject in which they scored their highest grade in column F
I have two problems
1. I don't know how to write a formula that brings in the subject based on the grade for each student
2. I don't know how to write a formula in case there is a tie (see DAVID L)
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
CodeCustomer's Cost
$34.10
$34.10
$34.10
$34.10
$34.10
$37.51
$37.51
$32.50
$32.50
$33.48
$33.48
$34.10
$37.51
$37.51
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View RelatedHow to get the Column Alphabet based on the Data it contains or the Column Heading using VBA?
Is it possible to get the Column Alphabet using any Macro or any function that within a Module it can always take the New Column Name during Execution..
Example: I have certain Columns where I have Yes and No Tick using the Wingdings P and Y..
Now these Columns are alternately Placed and there are six columns in all and they are spread over 12 Columns as the Alternate COlumns is reserved for Manual Entries.
Now I intend to increase the Manual Entry Columns but the problem is that every time I do that I need to make changes in my VBA Code.
Is it possible that even when the Columns are Inserted or Deleted in between before or after these columns I dont need to change the Explicit references by changing some approach.
I am not fuly conversant in VBA but use it whenever things are not completely feasible with Formulas AFTER GOOGLING.
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("X3:X13")) Is Nothing Then ' You can Change the range here
Cancel = True
[Code]....
As you can see the Ranges are Alternately Placed and there are about 6 such Columns with the above TICKS..
Now, how do I keep it FLoating so that even after changing the COlumn Location it does not need to get Updated i.e. X and Z Column Alphabets..
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
A(invoice#) B(Item) C(total) D(invoice total)
111 widget 1 $5
111 widget 2 $10
111 widget 3 $8 XXXXX
222 widget 1 $5
222 widget 5 $15 XXXXX
333 widget 2 $10 XXXXX
444 widget 5 $15 XXXXX
I had thought an IF formula would be the way to go.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
I am trying to write a formula in a cell that sum the Total/Day and the Total/month and graph it based on Date
example:
-----Date-------- Sale------Total/day-----Total/month
1---10/10/2012 ---$5
2---10/10/2012 ---$7 ------$12
3---10/13/2012 ---$2 -------$2
4---10/17/2012 ---$8 -------$8 -----------$22
1---11/3/2012 ---3
2---11/3/2012 ---5 ----------8
3---11/7/2012 ---6 ----------6 ------------14
1---12/15/2012 ---2 ---------2
2---12/25/2012 ---4
3---12/25/2012 ---2 ---------6 ------------ 8
for some reason my VLOOKUP formula isn't calculating. i want the VLOOKUP to appear in column E of "2ILMaster." I want to pull data from "ILComp" column B. i've tried formatting both columns as number and general, and the formula still doesn't work.
View 2 Replies View RelatedI want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
In the attached spreadsheet I track the performance of my team. I enter the AHT for my team in the work sheet named "AHT Summary".I keep updating this data every month. automatically sort the updated data and rank the agents based on their average AHT. The person with the lowest AHT should be ranked 1. Column is highlighed in green for your reference. Based on this ranking the work sheet named "Ranking" should be updated automatically. Since I am taking a weighted average for all agents, the one who gets the lowest AHT should be ranked 1st . In the ranking work sheet the agent with ranking 1 should be given 100, the second highest ranked person should get 98,third 96,fourth 94 etc.
View 6 Replies View Related