Sum Data In Date Range With VBA?
Apr 23, 2014
I would like to total or sum data within a date range. The dates will change and be added to often. The data needs to be totaled for each month. I have used the SUMIFS formula successfully but i would like to try it using VBA if its possible.
This is the formula I used :
=SUMIFS($B$2:$B$9,$A$2:$A$9,">=" & $D$2, $A$2:$A$9,"<=" & $E$2)
My cells and pages are different.
Date Revenue
11/15/2013$10,000.00
11/16/2013$15,000.00
12/1/2013$100.00
12/5/2013$300.00
12/6/2013$5,000.00
1/5/2014$8,000.00
1/6/2014$11,000.00
2/10/2014$12,000.00
View 4 Replies
ADVERTISEMENT
Jun 20, 2013
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
View 12 Replies
View Related
Dec 31, 2009
Hello, I have a question about sorting information using dates but using a range. I need this to sort when I enter a date range into the spreadsheet (the blue blocks on the attached spreadsheet). The factors in colum G need to be sorted by month and input into the yellow highlighted area in column B. There may be an easier way of pulling the data from the "Data" sheet but this was the best I could figure out. Overall, January (or any of the months)needs to have the January (or appropriate) factor that fits within the date range that was input but sorted properly based on the months listed in Column A.
View 6 Replies
View Related
Feb 2, 2014
I have a spreadsheet that records water consumption in L/s at 5 minute intervals. I've attached an example of the data collected during January 2012.
Is there any formula that will calculate the total amount of water consumed between a user-entered date range? For example:
From: 01/01/12 00:00 (User enters 'from date and time' in an allocated cell)
To: 20/01/12 23:55 (User enters 'to date and time' in an allocated cell)
Consumption: ______ (Formula generated result in Litres)
View 3 Replies
View Related
Sep 12, 2009
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P.
Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
View 8 Replies
View Related
Nov 28, 2012
I have been having problems with a function trying to count data within 2 date ranges.
When inserting the 2 dates required into collum B2 (week beginning) + B3 (week ending) it does not
View 8 Replies
View Related
Sep 22, 2007
I have a an excel file which has 2 columns of data. 1st column indicates the date. 2nd column indicates the data associated with the date.
I would want to create a code that is able to extract the dates that is able to let user select the date range and its associated data and copy it into another worksheet.
But it seems that my below code fails. Can anybody give me some advice?
For eg in the attachment file, the Raw Data worksheet contains all the infomation and i wish to copy all the data from 8thJuly07 to 30thJuly07 to another sheet named Edited Data.
Sub date_choice()
Dim i As Integer, j As Integer
Dim end_date_last_occurence As Integer, No_of_end_date_occurence As Integer
Dim strt_date_1st_occurence_row(1 To 10000) As Variant
Dim end_date_1st_occurence_row(1 To 10000) As Variant
Raw_data_last_row = Range("A" & Rows.Count).End(xlUp).Row 'Get the last row no
Sheets(1).Name = "Raw Data"
start_Date = InputBox("Enter Start Date", "Start Date", "dd,mm,yy")
end_Date = InputBox("Enter End Date", "End Date", "dd,mm,yy")
View 8 Replies
View Related
Apr 22, 2014
I'm compiling data from field reps that comes in a big spread sheet. I want to pull the rows out that fall into a certain date range. For example, if it falls between January and March. How would I do this?
Company 1
3/5/14
$54,000
Q1
Phase I
10%
Company 2
2/1/14
$16,000
Q4
Phase II
80%
Company 3
12/1/13
$18,000
Q2
Phase I
20%
View 4 Replies
View Related
Dec 10, 2008
I took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range
Total unique orders in that date range
List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.
View 4 Replies
View Related
May 16, 2006
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
View 9 Replies
View Related
Jun 15, 2006
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
View 9 Replies
View Related
May 25, 2014
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies
View Related
Feb 13, 2014
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
View 5 Replies
View Related
May 1, 2014
I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies
View Related
Oct 11, 2008
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
View 2 Replies
View Related
Apr 2, 2014
I jst need to console data from different workbooks to one worksheet. There are 30 workbooks & each workbook contains one worksheet name as Data. The work i am currently doing mentioned below step wise
1) Open workbook
2) Apply filter on whole data
3) Select dates from "J" Column (E.g 02/10/2014 to 02/20/2014)
4) Then Copy whole filtered data
5)Paste into New workbook
6) Open another worbook
7) repeate Step # 2,3
8)Then paste whole data in below the first data New Workbook (In which we have paste the first data below that i will paste this data)
These steps i have to do manually it takes almost 1hr daily After pasting all 30 workbooks data in one workbook i have to make pivot of it & sent it to my Manager. What i need
I jst want a excel macro that will ask me date range from which i have to pull data from all 30 workbooks.
Once i gave date range will jst click on button say extract or pull. It willl console whole 30 workbooks data from the given date range in a one worksheet.
View 13 Replies
View Related
Jan 22, 2014
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
View 4 Replies
View Related
Jan 2, 2014
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
View 1 Replies
View Related
Mar 5, 2014
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
View 1 Replies
View Related
May 26, 2014
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies
View Related
Apr 21, 2006
Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
View 4 Replies
View Related
Jul 1, 2008
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View 2 Replies
View Related
Mar 28, 2014
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
View 13 Replies
View Related
Dec 12, 2011
way to search and display a date from a range of cells based on less than or greater than criteria. For example I have following dates in column A:
A1: 2011/01/04
A2: 2011/02/01
A3: 2011/03/01
A4: 2011/04/01
I want to search for the date which is less than 2011/02/01 from the A column and display that date in B1 cell for example. How do I do that?
I want to do this without using any macros.
View 9 Replies
View Related
Dec 31, 2009
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View 8 Replies
View Related
Mar 17, 2008
Is there a UDF that can determine the number of weeks for a date range specific that is not relative to the week number for the year but for the date range itself. i am aware of the weeknum function but this is for week number relative to the year. eg. date range 01/03/2008 - 31/05/2008 has approx 12 weeks and 14/05/2008 will be week number 10 for the range.
View 4 Replies
View Related
May 29, 2008
I've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile!
Requirement:
I press a button on Sheet1 and am prompted to enter a start date and an end date.
Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted.
All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
View 5 Replies
View Related
Jun 19, 2008
I'm having a problem with data validation. I set an entire column so that it could only be a date between the first date in the list and the current date. I tested a few cells to make sure that it was working the way I wanted and I noticed that it allows a random number like 3 or 5 to be input after row 50. This would create a date in the 1900s. Why is this happening and how can I stop it.
View 9 Replies
View Related
Jun 4, 2014
I am trying the following:
I have sheet1 where column A has dates.
I have sheet2 which has specific dates in range AX3:AZ300
I am trying to have a formula ( Index) to match sheet1 dates to sheet2 dates. and if they match then it will return as True or 1 if not False or 0. Therefore avoiding any errors
I have done following formula but it does not work
[Code].....
View 11 Replies
View Related
Feb 7, 2014
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
View 4 Replies
View Related
