Sum Row Based On Condition Refering To A Different Row
Dec 9, 2009
I have a problem with bringing up the data I need to cells in one row.
In row 1 I have dates:
23-Nov 24-Nov 25-Nov 26-Nov etc.
In row 2 Quantities:
2000 1500 250 750 etc.
In row 3 I have dates again (I need to start working towards these qty's): 20-Nov 22-Nov 25-Nov 25/Nov. I would like in column A of 4 row to sum all the qty's (row 2) if the date in row 3 is the same or smaller than in row 1 column A. But in column B and forward I want cells to sum qty's if the date in row 3 is the same as the one in row 1. I have tried : =sumproduct((A3:D3<=A1),(A2:D2)) for cell A4
and: =sumproduct((A3:D3=B1),(A2:D2)) for cell B4 and consequently for others. It comes back as zero value even if I see matching dates/qty's. Does anyone know what shall I change in my formula to make it right?
View 3 Replies
ADVERTISEMENT
Dec 5, 2009
Currently I have a code that names a worksheet automatically with the date the first entry was keyed in. The problem is that I'd like to create a formula that would not be affected whatever the names of these sheets might be. There are 21 sheets, the last sheet would be the one containing the formula adding cell values from the preceeding 20 sheets. I've been scratching my head with this for a while now trying to come up with a workaround solution.
HTML Private Sub Worksheet_Change(ByVal Target As Range)
Dim dateTemp As Date
ActiveSheet.Names.Add Name:="timestamp", RefersTo:=Now()
dateTemp = Val(Mid(ActiveSheet.Names("timestamp"), 2))
'Sheet is given a default name until the first entry.
'The name is changed to the date the entry was made.
If ActiveSheet.Name = "DAY01" Then
ActiveSheet.Name = Format(dateTemp, "MMM dd.hh.ss")
End If
End Sub
View 5 Replies
View Related
May 24, 2007
I have to refer the content of a text box in a formula.
The Text box and the cell containing the formula will be in
the same worksheet.
Is this possible first of all? I searched the excel help in and out
and I could not find a way for this.
View 11 Replies
View Related
Feb 20, 2007
Is there a preferred way of referring to the Workbook or worksheet which is hosting the macro.
For example say I have the following Macro:
Sub test()
Dim MyHostMacroWorksheet As Workbook
'''''''''''''''''''''''''''''''''''''''''''''''''
Set MyHostMacroWorksheet = Workbooks(1)
MsgBox (MyHostMacroWorksheet.Name)
'Works only if macro was inside first workbook opened
'''''''''''''''''''''''''''''''''''''''''''''''''
'''''''''''''''''''''''''''''''''''''''''''''''''
Set MyHostMacroWorksheet = Workbooks("foobar.xls")
MsgBox (MyHostMacroWorksheet.Name)
'Works but have to modify every time I copy code from workbook to workbook
'''''''''''''''''''''''''''''''''''''''''''''''''
End Sub
I am looking for explicitly saying "The Workbook/Worksheet that is specified by VBAProject"
View 9 Replies
View Related
Sep 19, 2008
I have a string variable that I want to make available to all modules. The string variable is a listbox.value. In a Userform I have users select a file from a list of files. This particular selection should then be used in a module of the project. Unfortunately, a Public statement can't be used in a class module to declare a fixed-length string variable. Is there any other way to make this variable available to the module?
View 9 Replies
View Related
Aug 2, 2006
I would like to reference information from another workbook. Instead of writing the Name of the other workbook I would like to reference through a Concatenate formula (e.g. CONCATENATE("Test"&G2&".xls")). I always get an error message. Is there any way I can reference from another workbook by using the Concatenate or any other formula?
View 5 Replies
View Related
Apr 17, 2007
I'm trying to check if a workbook can be used in some processes later and whithout opening the other workbook. is it possible. i have done this
str_prod_PT = Application. GetOpenFilename
If str_prod_PT <> "FALSE" Then
If Workbooks(str_prod_PT). Sheets(1). Range("A1").Value <> "Ordem" Then
MsgBox "Ficheiro incompativel", vbCritical
Else
TextBox1.Value = str_prod_PT
End If
End If
View 3 Replies
View Related
Apr 12, 2014
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
View 9 Replies
View Related
Dec 15, 2009
I want to total column C, but only where column B contains certain data, like add column C where column b contains abd so that i get the answer 7, Hope ive explained it right.
B C
abd 1
abd 2
bmr 3
abd 4
crc 2
crc 3
bmr 2
View 2 Replies
View Related
Mar 22, 2009
I have a column called Average and it have numbers from 0 to 100. I want to set a string on another column based on the value of Average. The condition is
< 50 is negative
= 50 is neutral
> 50 is positive
For example
Column A Column B
45 Negative
50 Neutral
80 Positive
View 4 Replies
View Related
May 4, 2009
I want to insert a line wherever I encounter a number. I have a range of cells in column "A" with invoices listed and at the end of each customer I have the total. At the total line (the number) I want to insert a line. Right now I can't figure out how get the cell value to recognize a number from a non-number data type (bolded area)
View 5 Replies
View Related
Aug 12, 2009
I would like to write a code, that can check the name of cell A1 with A2.
If A1=A2, then insert a blank row between these two rows.
I have started with a loop, but somehow it does not work.
Sub AddRows ()
Dim Row As Long
For Row = 1 To 3800
If Cells(Row, 1).Value = Cells(Row + 1, 1) Then
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End If
Next Row
End Sub
View 9 Replies
View Related
Dec 14, 2009
I want to delete a row in excel based on a condition.
The condition is as follows:
I have few rows in the excel where the columns 7,12,13,23 are same and column 24 in one row has some number and in some other row the column 24 is blank with orange color filled(the colorindex for orange is 44).
In this case I want the row with orange color filled in column 24 to be deleted.
View 11 Replies
View Related
Jan 28, 2009
i looking for function, which will give me a results if its the person good , bad and other (Y). It will look based on column A, but if will be more equal names in this column, it looks in the column surname (B) and return value from column (Y) in this row. But it can be more equal column B.
Here is an example:
Results what i want are in Z1,Z2,Z3
X Y Z
1 sue doe good
2 joe bond very good
3 mark no bad
SOURCE table
A B C
1 john doe good
2 joe black bad
3 sue doe good
4 mark black not bad
5 joe bond very good
6 mark no bad
7 kat doe bad
View 4 Replies
View Related
Feb 2, 2007
I have a "if" statement that goes something like this:
=if(and(Function1),do this, if(and(Function2), do that, 0)
where Function 1 and Function 2 consist of three conditions each.
Now Function 2 has reference to a particular cell (U23), whose value is dependent on other cell references.
If U23 has some real value, I want the above statement to be executed.
However, if U23 displays a "#N/A", I want only Function1 to be executed. i.e. = if(and(Function1),do this,0)
View 9 Replies
View Related
Sep 27, 2009
I autofilter a list which contains, among other fields, program numbers in column A, account numbers in column B and dollar amounts in column E. I want to display the filtered/subtotal of column E if I select a certain program. Each program has account numbers ranging from 1000 to 8999.
I used =SUM(IF()) formulas to separately display totals with account numbers below 8000, and >7999 with no problem. But when I got to create formulas to display the subtotal, I encountered difficulty.
I used the following CSE formulas to subtotal sum of column E based on the values in column B, the first formula return 0 (zero), which is incorrect. The second formula appears to ignore the IF statement, and returns the total sum instead of the filtered total.
1. {=IF($B$4:$B$112>7999,SUBTOTAL(9,E$4:E$112),0)}
2.{=IF($B$4:$B$112
View 8 Replies
View Related
Dec 28, 2006
function that can find the maximum value in a range, where the range is defined by the rows containing a specific string, i.e:
In column A:
Alm Rød
Alm Grøn
Alm Blå
Special Rød
Special Grøn
Special Sort
...
In Column B I have values for each of the above string names.
Now I would like to find the maximum value for the range with names starting with "Alm".
View 6 Replies
View Related
Jan 19, 2007
i have an issue i need to delete entire row if a condition is met, i need syntax if possible to delete if a cell word "begins with" a certain letter ...in this case...letter A
column is "O"
must search threw entire row
View 3 Replies
View Related
Jan 18, 2010
I need a formula that will return a total for the number of cases that have been closed within 6 months. Also I need a percentage total for number of cases that have been closed within 6 months. So the conditions are that the case has been closed and within 6 months.
I tried to use a IF formula that returned a 1 if within 6 months and a 0 if outside 6 months and then just SUM() the column, however for some reason that just returns 0. I am using Excel2003
View 4 Replies
View Related
Nov 6, 2013
Is there a way to filter data based on multiple OR condition with a like parameter.
I have data which has near about 50000 rows and now i would like to filter on a header called "Activity Type" and would like to fetch result for a text which resembles "from ABC group" or "From PQR group" or "From XYZ group".
View 5 Replies
View Related
Mar 10, 2014
I'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
View 4 Replies
View Related
Apr 4, 2014
I need a macro I can run that will insert a row whenever Column A changes (from PPN A to PPN B to PPN C, etc.) and that will insert string values into the Cells as follows:
In all cases, the insert cell values into column A (PPN) will be the value from the previous cell and column B (CPN) will be 'LABOR'
Here's image of before and desired after:
Before:
PPNCPN
4AQ02SLAG
4AQ02SAND
4AQ02CHIPS
4AQ02PORTLAND
4AQ02ADMIX
4AQ02AUTUMN BLEND
4AQ02OVERHEAD
4AQ03SLAG
4AQ03SAND
4AQ03CHIPS
4AQ03PORTLAND
4AQ03ADMIX
4AQ03BETHEL BLEND
4AQ03OVERHEAD
After:
PPN CPN
4AQ02SLAG
4AQ02SAND
4AQ02CHIPS
4AQ02PORTLAND
4AQ02ADMIX
4AQ02AUTUMN BLEND
4AQ02OVERHEAD
4AQ02LABOR -insert row and populate cells here
4AQ03SLAG
4AQ03SAND
4AQ03CHIPS
4AQ03PORTLAND
4AQ03ADMIX
4AQ03BETHEL BLEND
4AQ03OVERHEAD
4AQ03LABOR -insert row and populate cells here
View 1 Replies
View Related
May 20, 2014
I have a workbook sheet change condition that, when triggered runs the following code (amongst others).
[Code] ......
What I would like is to amend the above (possibly in a loop?) so that it skips the rows in which the value "New" features in range F17:F190.
So basically Autofill as per the code but leave the values in the cells of the range in which New features in range F17:F190
View 4 Replies
View Related
Jun 16, 2014
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
View 7 Replies
View Related
Mar 14, 2014
I have a file in which I have data from A9:I50.
In the column C i have the type mentioned either MTC or SELF.
If the value in column C is SELF then I want to highlight the corresponding rows from A:I.
[Code] ......
This code is colouring the entire row.
I want it to be highlighted from A to I.
View 2 Replies
View Related
Jan 18, 2009
I had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG
1011121330
14151617100
18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
View 4 Replies
View Related
Feb 18, 2009
I have a spreadsheet that I need to cut and paste data from one tab to another but only from columns B:K (as the spreadsheet has formulas that can not be alterred after column K. It must also paste that data for the hidden columns.
The condition on the data to be pasted in based on the tabs along the bottom.
So for example, anything that says Corn Products needs to be cut from the "standard customers" tab and moved to the Corn Products tab, and so on for the additional tabs.
I then need to un-check (hide) Blanks from the filter on the Standard Customers tab.
If possible, I would like run the Subtotals function in this same macro; the conditions for that are as follows
For each change in Shipper, Subtotal Billing for <<month>> (Column S)
Page break inbetween each Change in Shipper, then I would also like each subtotal figure bolded.
Also, this is something I must do every month, and each customer may have more or less lines or no lines at all in any particular month.
View 14 Replies
View Related
Mar 4, 2009
Currenty i am designing accounting related excel design. In that i need one macro for entering the value in a table based on some condition. I explaine the concept behind this, could some one able to help mean please share the information
I have a xls worbook with two sheets.
in the first sheet contain the column for entering the values.
in the second sheet having one small table withdate and Numbers.
i need to enter the values in the first sheet S.NO, Date and Value. when i enter the value in the first sheet, the date and S.No is compared to the second sheet table Date and the S.No and the value should be placed in the appropriate cell.
View 9 Replies
View Related
May 13, 2009
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
View 6 Replies
View Related
Jun 15, 2009
I have an Excel file with multiple worksheets. 4 of these worksheets have the same format and have concatenate formulas in cells D14 through D28. What I need is an automatic pop-up message to tell me when I open the file if on any of these 4 worksheets text is generated from the concatenate formula that matches either "air cooling unit", "air heating unit", or "ceiling".
And, if so, I need for the pop-up to state the name of the Worksheet/tab and which of the above text strings match. For example, if one tab is named "6-5-09 C" and within the range of D14:D28 the text "ceiling" is listed, the pop-up should read something like, "Maintenance Needed for ceiling on 6-5-09 C!" If there are multiples on multiple worksheets, then I'd want all of them listed on the same pop-up. Then I would want to be able to click OK or CLOSE to close the pop-up. If I can even color the pop-up a color different than the regular gray, that'd be cool too.
View 2 Replies
View Related