I am looking for a way to sum up values segregated on specific dates.
I like to sum up values from column C based on dates in column A. Data I have to look at are based on groups of 7 weekdays. Data to be sum up always goes from Monday too Sunday
Example: If date is equal to or lower than 31-12-2009 then sum values C2:C5 and if date is equal to or larger than 01-01-2010 then sum values C6:C8.
I have a spreadsheet where I tack daily expenditure. On a given day I could spend on several items. At the end of that day I want the total of that day's spending in the last row that bear the same date.For example in the table below, I have the date, amount and total columns.
I want to be able to have a formula in the totals column that look at the dates in the date column, and where the date in a row is different from the date in the row immediately below, sum the values of amounts in rows with the same date and give the total in the last row with the same date.
I have data that contains all the days in a year G7:I372. I want to lookup a value based on month, date and return the result. The sheet I am using contains a list in A3. As I change the value of A3, i want the dates to update. See attached sheet.
I'm trying to create a master template for doing cash flow projections for a number of years. Ideally I would like have a cell for the number of years I want (10 for example) and have excel populate a group of cells based on that number. Each row of cells would be one year and each column would be one month. The dates would be calculated based on a starting date that I enter into a cell.
After that I would like to have a cell for starting cash flows ($1,000 for example) and then another cell that I can plug increases into. For example cash flows may increase to $1,250. I would also need a cell for the date cash flow increases go into effect (1/2019 for example).
I want to populate two cells (the yellow ones) with the start and end date values from the row where a match is found in the 'period' column for the value in the left-hand green cell and in the 'week' column for the value in the right-hand green cell. Is anyone else on the board firing on all/most cylinders today?
Column A contains asset names Column H to JZ contains cash outflows for each asset Row 17 contains a Month&Date value (ie. July2013)
What i want to do is, from another sheet, is to calculate the sum of all cash outflows for the asset (determined by a cell value) for a date range entered. In other words, if i say 1/7/2012 to 30/6/2014, it will look the asset up, and sum the value of cashflows, in colums that fall between those dates for that asset.
I have a workbook which contains lots of formula and is therefore very large (about 70 mb). The sheet pulls information from field instruments every hour of every day for the entire year.
I want to write a macro, that loops through a range (B5:B8764) and copies the entire row if the value in column B is less than =NOW() - 7 days. The copied rows should then be pasted with values only exactly where they were located e.g. row 5 should be pasted back to row 5 the only difference being only the values will be pasted.
I'm trying to find a formula that will allow me to show a value based on whether certain dates have passed. This is for the purposes of calculating PTO hours and removing unpaid holiday hours from the equation.
I've got "slave" cells set up with the dates and amount of hours for each holiday, but I'm having some trouble.
I've been trying something to the effect of: =IF(B4>B14,8 IF(B4>B15, 13))
Now, I can get it to show the "8" if I keep only the first IF function, but adding additional F functions like in the formula above only returns errors.
My goal is to get B7 to show the sum (through formula or manual entry) of C14-C21 based on whether B4 [=NOW()] is before or after the corresponding date in B14-B21.
I need to clarify any terminology or other cell values.
summing monthly values based on different date ranges. For example if I have multiple contracts with different start and end dates and based on those date ranges, I want to sum the respective monthly production totals, how would I do that in a formula. I started to set up the table to include "start date month" and "# of months in contract". Is there a way to sum based on the start month and # of months in contract.
For example if hte contract started in Jan08 and ends in May08, the calculation would start with month "1" and sum over 4 months.
I'm trying to calculate Interest accrued from a specific date. The problem is payments can be interest only which when used should keep the next months interest at the same rate instead of decreasing because the principal hasn't been paid down.
Im having problems when over the course of a number of payments they are principal + Interest and Interest only which requires at times to add up the same interest amount for 2-3 months in a row, then add up a different interest rate, etc. Additionally if the reference date is say on the 15th and the interest date is the 1st then for the last month I need to calculate the interest on a daily basis based on the current interest rate for that month.
The reference cell is H5, the Date ranges are J2 - J12, and the principal fields are: K2 - K12.
In the next post I will include the Amortization schedule.
In this example the interest is accrued at the same rate months 1-7, then decreased for months 8 and 9. so the total interest accrued should be eqaual to: $7487.74 (see next post for schedule).
Microsoft Excel - ZZ_Loan.Calculator-Update.1.1.xls___Running: 12.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH6H7H8H9H10H12H13H14=FGHIJKLM1 v 1.0 PaymentApply DatePrincipal + InterestAdditional PrincipalInterest Only2 1/1/2009 833.333 2/1/2009 833.334Quarter Close Backward 3/1/2009 833.335 Close Date9/1/2009 4/1/2009 833.336 Days of Interest0 5/1/2009 833.337 Beg Principal Balance$100,000.00 6/1/2009 833.338 Paydowns$980.41 7/1/20091,321.51 9 End Principal Balance$99,019.59 8/1/20091,321.51 10 Net Principle Due$3,562.50 9/1/2009 829.2711 Interest Due & Accrued 10/1/20091,321.51 12 Interest Earned (cummulative)$7,350.66 11/1/20091,321.51 13 Interest pymts (cummulative)$7,350.66 14 Net Interest Receivable$0.00 TEST [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
I am in desperate need of a function that will count a column of data where there are blanks and values based on a certain date that will also capture any data that is added after refreshing the table from Access. I have tried several functions but this is what I have: =(ROWS('TouchBack Detail'!$Q:$Q)*COLUMNS('TouchBack Detail'!$Q:$Q))+(COUNTIFS('TouchBack Detail'!$B:$B,'Nov TouchBack Summary'!B$1)). The result should be 3 but it’s including all other cells in the column that are not and should not be included in the refreshed table’s data (Table_TouchBack.accdb). I have attached the spreadsheet for review. The function is in cell B27 highlighted in yellow.
Column A = Date Column B = Reservations made per day
For ex:
A B 1 3/1/2011 5 2 4/5/2011 10 3 3/8/2011 15
Then I have a look up table where based on the date ranges it assigns a week number.
WeekDATE Range 1Date Range 2 718-Feb-1124-Feb-11 825-Feb-1103-Mar-11 904-Mar-1110-Mar-11 1011-Mar-1117-Mar-11 1118-Mar-1124-Mar-11 1225-Mar-1131-Mar-11 1301-Apr-1107-Apr-11 1408-Apr-1114-Apr-11 1515-Apr-1121-Apr-11 1622-Apr-1128-Apr-11
I am looking for a fomula that would assign a week to the corresponding dates on column A and tha would then add all of the reservations booked for each week.
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected.
2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc.
3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
I'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
I have a table that looks like this (its basically a historical data of a stock exchange):
Date Index January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range. Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1 Restricted 5 etc
Example of data ie. a1 b1 c1 Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date Dim projEndDate As Date Dim DateStart As Date[code]....
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data. Set 1 (hours) Employee number, date, hours 12345, 1-2-2014, 6 12345, 1-3-2014, 8 12345, 1-10-2014, 8
Set 2 (periods) Employee number, start date, end date 12345, 1-1-2014, 4-1-2014 12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this. 12345, 1-2-2014, 6, 1-1-2014, 4-1-2014 12345, 1-2-2014, 8, 1-1-2014, 4-1-2014 12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
I have a forecast monthly trial balance sheet and an Income Statement Analysis sheet. I am analyzing the Year to Date performance for Dec-2013. I need a formula that will match the income statement line i.e revenues, accounting expenses etc. and then sum horizontally from Jan-2013 to Dec 2013 ( if YTD month' Dec-2013' is greater than or equal to date range then sum horizontally the corresponding income statement lines up to the reporting month).
is there a formula that will look at A2 and if the date in that column shows May 5, 2013, then in E2 it enters June 1, 2013? I would like E2 to automatically populate the first of the following month of A2.
I have a report that in column A shows a ship date. These ship dates may be "Previous","Same Day", "Next Day", or "Future".
I need VBA code that will look at the day in column A and determine if it matches the current date on the computer if it does then in column W in the same row I need the string "Same Day".
If its the systems date plus 1 day column W in the same row would state "Next day".
If its the systems date plus 2 or more column W in the same row would state "Future".
If its any date prior than than the current system date then column W in the same row would state "Previous".
