Summing Numeric Parts Of Alphanumeric Values

Nov 10, 2009

I am wondering if you can sum the numeric parts of a range of cells containing alphanumeric values. Here is an example:

values to sum: 500, a20, ab30
expected results: 500 + 20 + 30 = 550.

In this project, the number of values to sum is large and I do not wish to use long formulas to extract the numeric part of each cell within the range. I am also forbidden to use up extra cells as an intermediate working out. Can you help?

View 10 Replies


ADVERTISEMENT

Summing Numeric Parts Of Alphanumeric Strings

Nov 17, 2009

I need to sum the numeric portions of any cell containing a certain letter within a row. I found a solution that works if all the cells within my row are either blank or contain a string with the "desired letter" lets say the letter is "a" so that we can compare it to ....

View 6 Replies View Related

Get Numeric Part Of Alphanumeric String?

Jan 3, 2013

I have a string that with spaces in between.

example:

X3PP2 1200 U

I would like to extract the "1200". How can i do this in VBA?

View 4 Replies View Related

MID Function :: Numeric, Alphanumeric Or Alpha

Mar 2, 2010

A2 cell data = 11 digits alpha-numeric number.

* begin with either "0" or "1"

I want to the formula to look at the 6th and 6th digit (numeric, alpha-numeric, or Alpha) and compare it with the cells under "'PSCCR Queue - Manager" TAB from C4 thru C7.

Below formula is only looking at the first value when comparing.

=IF(A2="","",IF(ISNUMBER(MATCH(MID(A2,6,2),'PSCCR Queue - Manager'!$C$4:$C$7,0)),"ITS","Non ITS"))

View 9 Replies View Related

Increment Numeric Value In Alphanumeric String

Dec 31, 2007

I have created a macro that searches for an existing part in my worksheet and copies the found part to the row above. I would like to increment the value of cells B and H in the new copied row. Both cells contain an alphanumeric string that ends with a numeric value. For example cell B has a string like this "APL-DK0030" and cell H has a string like this "Dell Optiplex GX260 V09"....

View 9 Replies View Related

Strip Only Leading Numeric From Alphanumeric String In VBA

Jun 20, 2014

I want to strip only the leading set of numbers from a string. Trailing numbers should stay.

Logic rule would be:
1) Find first Alpha character
2) Remove all numbers prior to this position

Code:
Original string Desired string
42114DEP DEP
050114OP2OP2
0514OPOP
050214BKCKSBKCKS
05214CKCK
0502CKSCKS
050214CKS-3CKS-3
050214CKSACKSA
050214OPOP
50214PSCASH1PSCASH1
050214PSCKSPSCKS
0502SALES SALES

View 9 Replies View Related

Increment Numeric Part Of Alphanumeric Text

Aug 16, 2007

I have a cell with a value of, Text 1 and in the next field I want it to display Text 2, then text 3 and so on.

Is there any way of doing this? I guess I am looking for something like a1+1, just a shame it doesn't work.

View 9 Replies View Related

Summing Variable Number Of Cells And Parts Of Cells

Mar 18, 2014

In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)

But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.

View 2 Replies View Related

Validate For Numeric Range & Alphanumeric Range

Dec 20, 2007

Can anyone help me to get a validation to check that what is entered in a cell, lets say A1,
has to be number between 100000 and 899999 (this I already have) OR a value/text from I100000 to I899999. So it only acceots a vlaue betwwen 100000 and 899999 and it is also ok to have the letter I at the begining.

View 9 Replies View Related

Print Parts In Portrait Parts In Landscape

Dec 21, 2006

I have a document needed to be printed with some pages in the middle in landscape page type, the rest in portrait. If using Word it would be easier, but in Excel I cant find the section break to chage page setup separately. Is there anyway to do it. Currently I'm printing the document separately in portrait and then landscape with some page break added and page number modified. However it's quite troublesome and easy to make mistake.

View 3 Replies View Related

Lookup Function: Compare Every Part In The All Parts Worksheet To See If The Part Number Exists On The Active Parts Sheet

Dec 10, 2008

I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.

I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".

View 3 Replies View Related

Numeric Date Into Alphanumeric Date

Dec 28, 2012

One system I use provides an output of the previous day the system ran (which is the date I need) but provides it in a strange format. Today, for example, would appear in 4 different cells.

Day Month Century Year
28 12 20 12

I would like to take this output and change it to 28-Dec-12.

I tried bringing them together using the code:

[Code] ......

Hoping (but but pretty sure it wouldnt work) that Excel would read it as 12/28/12 and convert it to 28-Dec-12 but that did not happen.

Is there any way to do this without using VBA?

If not, is there an easy way to pull this info using a very simple macro?

View 3 Replies View Related

Alphanumeric Ohmic Values ()

Dec 7, 2006

I have created a log file for work which records jobs processed. Additional code has just been added to retrieve job information data from a statistical process control program. This works fine however the spc program outputs the Ohmic value as ohms which I need to convert into alphanumeric format. For example: job value is 24K4, spc outputs as 24400 which I need to convert to 24K4. The Ohmic values range from mOhms to gOhms. Examples below.

0.003 = R003
0.025 = R025
0.150 = R15
1.0 = 1R0
15 = 15R
3600 = 3K6
1700000 = 1M7
220000000 = 220M
1000000000 = 1G0

Bearing in mind that the above are just examples of possible values, is it possible to convert numeric values to an alphanumeric format similar to those show above using VBA? You may ask why I need to convert. The log file allows manual input of job information where the value is entered in alphanumeric format. It also contains a search form which displays results allowing the user to see if a job has been processed. Obviously it is easier for the user if the job value is displayed as alphanumeric.

View 2 Replies View Related

Sum Values From Alphanumeric Strings

Feb 8, 2007

On a work sheet I have 20 columns that may or may not have data in it. In the 21 column I want to have a sum "of the values" in the other columns. Problem is the data is in this form i.e. 6 01/17/07 smr or 15 1/19/07 gtw or 24 01/21/07.

To clarify each cell will have a value of a number from 1 to 99 followed by 2 spaces. Then it can have 2 more spaces and an id tag or just finish with the date.

So, from the example above in column 21 I would have a current value of 45 and it could change if more values were added.

Note values are generated from a macro. It may be possible to change the macro so that a comma or such may be used to seperate the different "values / data types"

View 4 Replies View Related

Alphanumeric Counter (automatically Populate A Column With An Alphanumeric)

Jun 23, 2009

I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...

A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)

This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).

View 3 Replies View Related

Accessing Values Of 'alphanumeric' Variables

Jan 3, 2010

I have declared a number of string variables named "hlpYear1", "hlpYear2" etc in the 'Worksheet_SelectionChange' function. "hlpYear1" contains the appropriate text to display if the selected language is English, "hlpYear2" is for French and so on. I was hoping that I would be able to use VBA to display the appropriate text by way of a 'For..Next' statement along the following lines:

View 4 Replies View Related

Function To Retrieve Only Alphanumeric Values

Oct 22, 2007

I have Column A sample below:

Column A

Row 1 WG32127

Row 2 WFH3040 / 3920

Row 3 WFBF3709/3919

Row 4 WG32156/3915, 3911, 3920

Row 5 WG32148129/3915, 2922

I'm trying to use the Left Function to get only the Alpha-Numeric codes only. I'm having the following problems.

1) The alpha-numeric codes are not a standard number of characters (they can vary anywhere from 4 to 10).

2) In some cases the alpha-numeric codes are alone in the column

3) In other cases they are with other numbers with back slashes separating them

4) In the cases where there are back slashes there are spaces, commas and other numbers as well.

Is there a way to use the Left Function to retrieve only Alpha-numeric codes only.

View 9 Replies View Related

Summing Matrix Values Based On X & Y Axis Values

Feb 24, 2009

The simplified example below is intended to calculate the sums from the data values in the upper data set and place them in the appropriate cells in the lower summary table. Example......

I would like to find a single-cell formula that will handle the multiple instances of either the X or Y headings (ex: there are two 'Yes' Rows) and still reach the appropriate summations. I would like to accomplish this without resorting to Macros or manual cell references if possible. I've acheived some limited success with array formulae so far, but find that the multiple instances of 'Yes' cause only one row to be summed before the formula finishes.

View 2 Replies View Related

Finding All Alike Values And Summing Up Corresponding Column Values

Jan 31, 2012

Here's an example of what I need..

I want to

A B
2.5 corn
4 corn
7 green
2 green

I'd like a macro to find all corns, add up the column A for each corn and place the sum beside the last corn in column C

Then do the same with green, etc.

View 2 Replies View Related

Extracting Alphanumeric Values From Sample Spreadsheet

Aug 3, 2012

Any code that can extract the alpha numeric values from sample spreadsheet below?

Where in col A "SCn" is extracted (or copied) and then pasted in col H?

n = 1 to 99

That is - from this:

A
B
C
D
E
F
G
H
I
J
K
L

[Code] .........

To this:

A
B
C
D
E
F
G
H
I
J
K
L

[Code] ......

There are thousands of rows to extract the alpha numeric values from.

View 6 Replies View Related

Subtotal And Countif In One Formula With Alphanumeric Values

May 9, 2014

I have a data set of students results and I have been using countif to pickup similar grades eg, C1, C2 and C3 all as C. However I need to subtotal filter against teachers and the sumproduct won't let me use C* as a wildcard to pick up the three types of C. How I can subtoal countif multiple criteria.

View 3 Replies View Related

Counting Unique Values, 2 Columns, Alphanumeric

Feb 16, 2005

I have two columns of data: 1 column can be possibly anything, either numeric, alphanumeric, or alpha only (VINS or vehicle numbers). The adjacent column are four different types of vehicles. I've tried concatentating the two to try and count the unique combinations (a truck maybe used more than once during the day), which I can get unique values, but not unique values for each type. Also, the range sizes are variable, but no more that 65 rows.

An example:

5CZ975 Van
25RW04 Straight
5CZ975 Van
ZJ6026 Van

So, the result I am after is 2 vans, 1 straight truck

I found an array in a another post, but it is not working properly (see cell F7 in the attached):

=sum(if(frequency(if($b$2:$b$18=$f7,$a$2:$a$18),$a$2:$a$18)<>"",1,0))
**ctrl+shift+enter**

View 5 Replies View Related

Comparing 2 Columns With Numbers / Letters And Alphanumeric Values

May 13, 2014

I have 2 columns i want to find out which items match in each column and put the matching value in column c. I have tried Vlookup and continue to get an N/A .. I tried countif and I get either an N/A or a value error. I have tried turning the cells into text but that is not working either..

column A has about 1700 rows and column B has about 4000

MOST CELLS ARE 6-7 VARIABLES.. satrting with either 01, 02, 03 with 4-5 letters following or have a 6 digit number or 6 letter value.

View 1 Replies View Related

Summing Values After Finding Max Consecutive Values

May 11, 2009

I have 10 columns (A-J). Column B is the Date & Column C is the Time, I have the data sorted 1st by date then by time. The 5th Column, E, is Size. The 10th column, J, is "Position."

This 10th column, J, is in binary format. A 1 equals a Position & a 0 equals no Position.

1) I need to find the Max Sum of the Size in which the Max consecutive set of 1s has occurred.

2) I need to also do this on a day by day basis, using the Date in Column B, without having to manually go through & modify all the formulas to reference the date.

I have a Sumif formula for the 2nd but it won't copy down to update the formula for each unique date. I have to manually change the date values & I have ~957 unique dates to do; so it would be a rather painstaking process if only done manually. Moreover, it doesn't count the Max Sum of all consecutive 1s in Column J...

The length of the non unique columns (all columns w/o unselecting the duplicate entries) is 19,068.

If you can be of help, I'd be very thankful...my brain is overloaded w/googling & using trial & error.

View 6 Replies View Related

Summing Up Values Of Right Column By Looking Up Values In Left

May 18, 2007

If I have two columns like so with Processor speed in the left and number of processors on the right:

SPEED NO OF CPU
7282
7282
7282
7281
7282
7301
7301
7302
7301
7301
7301
7301
7312
7312
7311
7311

SPEED ranging from 75 to 2000 or so Mhz, as many or as little multiples of each speed. I wish to go through this list using a seperate list of distinct values, and count the total number of CPUs for that SPEED. So, for the extract above I could manually tell you that there are a total of 8 processors running at 730Mhz

It would be nice to have a list of distinct vaues with a total count of CPUs to the right of each SPEED

730 8
731 17
756 9
834 2 etc

View 3 Replies View Related

Search Parts Of Columns Looking For Matches In Parts Of Other Columns In A Row

Mar 1, 2014

I have sheets with names of people in columns....some married...some not. When they are married, here's a sample format...

Jones, Donald T | Baker, Sarah Jane | Jones, Sarah Jane | Smith, Sarah J | Jones, Sarah Jane Smith

In this example, I would like to be able to determine which of the Sarah's belongs to Donald w/o having to visually look at each record ( 100,000's of records). (FYI: the names for Sarah would/could be her Maiden Name and possibly a name or two from a former marriage). What I need to be able to do is match and extract the names of Jones, Donald T and Jones, Sarah Jane and Jones, Sarah Jane Smith and eliminate Smith, Sarah J and Baker, Sarah Jane.

In my example, Donald is in the first column, but can be in any column on a row so the name positions are random across the columns. However, the format for each column is then same...Last Name, First Name Middle Name(or Initial) with a comma always after the last name in each column. The length of the last name also varies.

VBA or Formula that will search the cells in the columns of each row and return the names (complete contents of the cells with matching last names) that have a matching last name for that row.

View 3 Replies View Related

Looking Up And Summing Values

Jul 9, 2009

I'm working with a worksheet with 4000+ rows, so I'm looking for a formula to automate a summation. In Worksheet1 (4000+ rows) I have data from 1998 to 2008 for each month and day:

Year Mo Dy Data
1998 1 1 41
1998 1 2 35
1998 1 3 79
...
2008 12 29 39
2008 12 30 81
2008 12 31 42

In Worksheet2 (365 rows) I have data for just months and days:

Mo Dy Sum
1 1 94
1 2 103
1 3 222
...
12 29 65
12 30 211
12 31 98

I'd like to take each Jan 1 datum for each year from Worksheet1, sum them, and place the value in the cell that corresponds to Jan 1 on Worksheet2. I've primarily tried using the VLOOKUP function, but can't seem to make it work.

View 4 Replies View Related

Summing HLookup Values

Jul 20, 2006

I have a chart of numbers pertaining to progress of a project by month. The
end of month dates are in a row across the top, the progress % are in
corresponding rows and columns below:

31-mar-06 30-apr-06 31-may-06 30-jun-06
5.5 3.4 1.2 2.6

I'm trying to do a SUM of HLOOKUP values to get a total progress for a given
month. For example, I need to see the total progress for end of May from end
of March: SUM(HLOOKUP(5.5) to HLOOKUP(1.2))=5.5+3.4+1.2 in a cell at the
end of the row. How can I do this? Do I need to use another function?

View 14 Replies View Related

Summing Values With Addresses

Apr 30, 2009

I am trying to do is summing a range based on a text value that corresponds to a cell address. I have a adddress cell value in say a1 = A$1$ and in a3 = A$10$. If I do a sum function where I want to use these cell values i.e. I use this formula but it does not seem to work, any insights?

SUM(Text(a1;"Text"):Text(a2;"Text"))

View 2 Replies View Related

Summing Selective Values?

Mar 13, 2013

I have a cheque list with Column A for Cheque number, Column B for Date, Column C for Payee Name and Column D for Amount

Cheque number ranges from sequence 1200 to 3600

Is it possible to set up a formula to sum the amount of cheques in column D based on the cheque sequence number of column A . In other words if based on criteria cheque sequence number is

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved