Been doing pretty good up till now but I can not figure out how to get a combo box in the first blank cell of column A. I am using the named range 'Units' and there are almost 900 of them so I need the combo box.
View 8 RepliesWhat i am looking to do is have column D display the value in column B...if column C is not blank. Here is an example.
View 4 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I am using this formula, but if the referenced cell is blank, it keeps putting a 0 in the cell. I want the cell to be blank if the referenced cell is blank.
=IFERROR(INDIRECT($E$1&"!$C4"),MATCH(INDIRECT($E$1&"!$C4"),""))
How can I make a cell display 0 or remain blank instead of #N/A?
I have several cells that are either VLOOKUP or just normal sum functions but they all display #N/A.
I have 180 different images to display with 60 different situations. This means that for every combination of 4 variables, there are 3 images. What I have set up right now are combo-boxes where a user would be able to select the situation which best suits them within the four variables. What I would like to happen would be to have the 3 images pertaining to the chosen variables appear within the worksheet. These images could be put within a worksheet or accessed through a folder.
View 3 Replies View RelatedIn range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.
This would then need to be repeated for (B5:M5, B6:M6, ETC).
[Code] .....
The following are on a sheet:
A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3
$E$1 and $F$1 are (the only) absolutes/constants.
A2 contains the following:
=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))
This translates as:
=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))
The result is a variable/number (235), "d" or a blank cell ("").
This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.
So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.
I just want to create a combo box that will allow my manager --- not so good at using menu commands or the scenario manager --- to choose one of five different budget scenarios. I can't seem to get the actual scenarios to change when the selection is made from the combo-box.
This is the
Im using code from website: http://www.contextures.com/xlDataVal11.html
to display a combobox when I double click any cell that contains a validation list in it. I'm not great with VBA so I am having problems finding what each part of the code does. This is causing problems for another bit of code that I use to display a msgbox when certain values are selected from the list.
The MsgBox shows up great when I select an item from the validation list but does not work at all when I select the same item from the double-clicked combo box. It would be great if I could get the MsgBox to work both ways. This is the code that displays the MsgBox when target value is selected from list
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.AddressLocal(False, False)
Case Is = "B4", "B5", "B6", "B7", "B8", "B9", "B10", "B11", "B12"
If Target.Value = "H" Then
MsgBox "This is a pop for extra information. Savvy?", vbYesNo, "Yo!"
End If
End Select
End Sub...............
Three columns.
A - Date last checked
B - Due Date
C - Actual Date checked
Currently column B is formatted to Date and simply has =A+84 and will display a date 3 months in future. However if there is no date in column A, then column B displays a default 1900 date.. Is there a way of making this blank if there is no date in col A?
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
I have a combo box named Combobox5 and a text box named Textbox7.
Should this code go in the Userform Initliaze or where? I have tried placing it in both the ComboBox5 Change evnent and no luck so far.
Range("G22:J28").Value = TextBox7.Text
Again this code is dependant upon the user making a choice from ComboBox 5.
I have also tried:
Range("G22:J28").Value = TextBox7.Value
I am using Excel 2003. Any ideas??
I know how to turn the autocomplete on and off but I donīt have a clue where I configure the data range or the cells to display the list when the combo box is clicked.
I am assuming that this is done in the Edit mode at "linkedCell" and LisfFillRange ... yet I canīt get this to work.
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
Cell J5 (as an example) contains the following sets of data:
Blank,D,W,T,C,DW,DT,DC,WT,WC,TC,DWT,DWC,DTC,WTC,DWTC.
I want cell BW5 to display a * if cell J5 contains either a blank, or a D,W,T or a C. If neither of those 5 sets of data are present then an empty field is required in BW5.
=IF(AND(AU51,J5=,U5=3,DP5=""),"*","")
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I want A1:A400 to display in B1.
View 6 Replies View Relatedi want textbox 108 to display the last entry from column A on worksheet MainSheet when textbox 6 is changed.
Private Sub TextBox6_Change()
Dim ws As Worksheet
Set ws = Worksheets("MainSheet")
Lr = Cells(Rows.Count, "A").End(xlUp).Row
UserForm1.TextBox108.Text = ws.Range("A2:A" & Lr).Value
End Sub
My is updated very frequently and i just wonder if it is possible to display the last filled cell of a certain column in another cell.
Imagine column B (B5:B1253) is filled with average sales values by using formula "B$5:B5" and i want to display the most uptodate average value in cell B1.
I have one collum with number ranging from 0-1000 in. I have another collum titled "above 90".
How do I get the "above 90" collum to display as 1 if the number in the other collum is above 90?
I understand it must be some kind of "COUNTIF" function but not sure...
Is there a function/routine/etc. that when I scroll over a cell that I can display the name from the row along with the date from the column. (I know I can do it if I click the cell.)
Objective: Once I zero in on the desired cell I click it to schedule the person to work, count their hours, add to weekly and monthly totals, etc. etc. etc.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedI want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?