I want to insert a text box into a line graph. I want the box locked onto a data point in this graph. The problem I am having is the graph is updated daily with more data so the point moves so I have to drag the box daily. Is there a way to fix this so it works automatically?
View 1 RepliesI am supposed to make an xy scatter graph like the one drawn of paper. The average point need to have a "cross" around it. So far I can just plot the points. I have added the average point as secondary series. I just need to put the "+ sign or cross around" it.
View 1 Replies View RelatedIf I have a graph with 2 series of data plotted, how can I display the x-axis' value when these 2 curves intersect each other?
View 9 Replies View Relatedfinding a function/formula for determining the breaking point (Yvalue) in a graph, that doesn't necessarely equals the maximum value of that curve!
So the curve in the sample is a stress strain curve (tensile test) of a fibre and at the end it breaks and the Y value returns to 0. I would like to determine that Y value before it is 0, so the last Y value before it returns to zero.
I thought of a formula like:
display last y value before it drops with 90%...
but I don't have a clue how to write it in maths...
Ok, so here's the trick:
I know how to create combo or mixed graphs with line/bars on single axis, and secondary axis. I even know how to do mixed stacked and unstacked columnar charts...
But how do you depict in single view graph
a single bar (1 datapoint) with a single line (upper control limit e.g. target).?
And I don't want to to use shapes to draw the target line.
I want the target line to be automatically plotted by Excel...
I have put my values into a XY scatter graph but need to find the maximum point i.e when the gradient is zero. I am using visual basic to obtain my data and draw my graph.
View 7 Replies View Relatedi have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies View Relatedhow to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
View 3 Replies View RelatedI have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I try to move the cursor using the keyboard arrows it stays on the cell it is on and the whole spreadsheet page moves across the screen in the direction of the arrow. So how do I restore cursor movement to the arrows.
View 3 Replies View RelatedIn keeping with their monopoly on code, Microsoft has, of course, locked all of the included XL add-ins (the code part).
I was interested in looking at how some of these add-ins functioned, seems like it could be fairly educational.
how to unlock the modules that come with XL's add-ins?
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I have a spreasheet with one locked collum that I don't want to be edited. Is there any way of filtering while this collum is locked? It seems to be that once it locks the collum it also locks the filters?
View 6 Replies View Relatedhow to lock a formula in a cell, protect the sheet but still allow it to recalculate when new data is entered in a unlocked cell that feeds the formula? I am using Excel 2003.
View 5 Replies View Relatedkindly help in jumping locked cell in a proteced worksheet..
View 9 Replies View RelatedSub PastSpec()
If Selection.Locked = True Then Exit Sub
On Error GoTo ErrHan
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ErrHan:
Exit Sub
End Sub
I recorded part of it and adapted it afterwards. You will notice I have a line to check for locked cells, this does its job if the cell selected is locked. However if the cell selected is unlocked and the cell below is locked the code still excutes and pastes.
I recently added two excel files to my startup, I receive the file in use error that the personal.xls is locked for editing box when the second file starts to execute. I can open them separately using their icons with no problem, what's the problem with opening them using the startup function. XP professional version 2002 SP2.
View 9 Replies View RelatedIn the Properties for every Text box I have on my forms it's not letting me change any of the colours but I can change the fonts etc, I'm using Excel 2003.
View 3 Replies View RelatedI have one spreadsheet that is locked and I cannot modify, with a button I want to press from a fresh new one that I have created.
The first one is private and cannot modify it.
Now, what code should I use in mine so I can "click" the button of the other one when I press it?
Using vba, I want to be able to tell if the vba code is locked. Using the below function I can tell most of the time. The only problem is if the " Lock project for viewing" isn't checked the below function will say it isn't protected. Is there a way to tell if it is protected even if they didn't check "Lock project for viewing".
Function ProtectedVBProject(ByVal wb As Workbook) As Boolean
' returns TRUE if the VB project in the active document is protected
Dim VBC As Integer
VBC = -1
On Error Resume Next
VBC = wb.VBProject.VBComponents.Count
On Error Goto 0
If VBC = -1 Then
ProtectedVBProject = True
Else
ProtectedVBProject = False
End If
End Function
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedAny way to make it so that a cell can remain locked but be able to click a hyperlink? I need the cell to remained locked so nobody can alter the hyperlink name and value but I would like users to be able to click it and have it open in their browser.
View 9 Replies View RelatedI have an application that I made for a company. the editing is locked on each tab except for the blanks for people to either check mark a box or fill in the space provided for an answer to each question. There are around 30 tabs. Sometimes i open already completed applications since most of the answerer will be the same. My question is. is there a way to select say 6 tabs and clear out all the data that someone had typed in (check marks, answers in space provided?)
View 4 Replies View Related