I am trying to format cells so when i type in 343 it will display as 3:43 like a clock, i have tried all the time formats and they all read back to me as 0:00 or as 12:00, is there a macro or a formula i am missing?
View 3 RepliesCan i put into the cells B38-AF38, that would display the sum of B20:AF20 + B24:AF24 + B28:AF28 + B32:AF32 +B36:AF36 in a h:mm format.
When imputing the data into a cell in a h:mm format, I need it to display in that cell and formula bar the h:mm format without having to put an apostrophe in front of "h" or ":mm" value. Once complete, this form is going to go to other trainers to use on their computers and I dont think they would remember to keep putting an apostrophe before the data.
Example:
B20= 1:15 (1h15m) NOT 1:15:00 AM
B24= :30 (30min)
B28= :45 (45min)
B32= 1:45 (1h45m) NOT 1:45:00 AM
B38= 4:15 (4h15min)
I have attached a copy of the form for better clarification.
It doesnt seem to be complicated, but it's certainly a lot more than I thought.
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedHow can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies View RelatedI'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format.
Is there a function or vba code that I can use in excel to convert the normal time format to epoch time?
I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies View RelatedI have a file that has the Date and Time combined into one cell. I want to separate the two, and cannot find anywhere on the net to do so!
This is the cells format:
d/mm/yyyy h:mm
Cells look like this:
28/05/2008 12:30
I'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format.
Is there a function or vba code that I can use in excel to convert the normal time format to epoch time?
I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View RelatedHow do I convert 11.20.00 in A1 to 11:20:00 in B1?
I've tried =TEXT(A1,"hh:mm:ss") to no avail.
As mentioned below , in excel sheethow to add and subtract time value and get result in time format. As given in below sheet, suppose i want to calculate each day stoppage duration and finally total stoppge duration. Kindly let me know the farmula or function for the same with example. I'm using excel 2003.
STOPSTARTDURATION
10:4512:151:30
0:201:301:10
5:5012:256:35
19:3020:301:00
16:0517:051:00
15:5017:151:25
23:500:000:10
0:001:001:00
23:300:000:30
0:001:001:00
17:2018:301:10
3:504:501:00
I found a formula for calculating time in the HH:MM AM/PM
=IF(B1<A1,B1+1,B1)-A1
This formula was to give me total hours in the cell for which it is entered, and cell format for the formula was in military format.
I cannot find this post. The formula worked in OpenOffice Calc program, but when it came to converting to excel, I came up with #value!
I want to enter the time in 12 hour format and using am/pm to designate. I am making it for someone to make work schedules with and they do not know military time.
i want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left.
TL is the difrence between the two times
i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON"
but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE"
how do i format this to show the difrence in minutes
TL = Range("N" & Line) - Range("M" & Line)
late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
I have 2 columns E and F that I am using, in Column E, I enter a time say 22:43:00, column F currently ads 15 minutes to what ever is in there with '=E3+TIME(0,15,0)' which is fine except if column E has no time in it when it automatically puts in 00:15:00, hov can I get the cell not to display anything in there is no value in column E.
View 2 Replies View RelatedI have a range from a column in my Excel table that is formatted ##-##/##. A number like 1.125 would look like 1-1/8.
I also have some values that are text, such as: #6 (I'm working with threads). I use # because it is not the same thing as 6, which could be 6 millimeters or 6 inches.
In combo box on my userform it just shows the decimal values of the range. How can I format the combobox to match Excel?
I have set up a UserForm containing a ComboBox, listing all suppliers. Upon invocation, the form becomes visible and the user enters a letter on the CB window, to which the CB displays the first entry starting with the user's input.
What I'd like to do is to have the CB expand its window, so that upon entering a letter the window shows something like, say, 5 entries, of which the top one is the first occurrence starting with that letter. Normally, clicking on the down arrow would do that, but I wonder if I can save them the keystroke.
I am having a data of about 500 students and
each student has 6 subjects A,B,C,D,E,and F. Now the thing is that it is not necessary that a
student must give all papers to pass in exam, it depends on what options the student has
selected. We have made a table in a form given below
RollNO. Name. A Mark Grade B Mark Grade and so on till F Mark Grade.
In the next sheet we have used the function V lookup and printed a format of marksheet as
follows:
Roll No.
Name
Subject Marks Grade
A
B
C
D
E
F
ALL USING VLOOKUP
Vlookup Vlookup Vlookup
so when in the next sheet we enter the roll no. the name field and the subject marks and grade
field all Come automatically, now let me tell u the exact problem, if a student has not given C
and E subject, because of Vlook up function ans using if function the fields in place of C and E
subject are left blank and the marksheet is not looking good. Now what i want is that if a
student has not given C paper the subject, mark and grade of D paper should come in place of C
paper place,, so that there would be no gap.. if a student has only attempted paper F instead of
Is there any way to format a cell so that text entered will always display in caps?
View 4 Replies View RelatedI'm in the process of setting up an Excel document and I need to be able to have it display dates in a specific format. I need it to express just a month and year such that the month is represented by a letter (A thru L) and the year is expressed as its last two digits such as in the these examples:
May 2012 = E12
Mar 2009 = C09
Nov 2011 = K11 etc.
I want the date to come out in this format regardless of how the user enters it.
I need to show data across the page, currently the data is arranged in column's, I need it displayed in row's.
Each material has a number of components, it is the components which I want to show across the page, with the different headings.
I have attached the current format and the required format.
Note the spreadsheet I will be working on has thousands of materials and hundreds of components.task.xls
I'm trying to avoid using merged cells or text wrapping with altered row height to display some text in multiple rows - similar to using centre across selection to have a header across multiple columns without merging. The guys that use the sheet type a comment that is relevant to five rows and the easy solution here would be to just type the first portion of the comment in the first row (about 30 characters will display in the column width available), then put the next 30 characters in the next row and so on but the guys keep getting lazy and merging the cells so they can type the comments more easily. I can lock the sheet or force validation but I think there's a better solution.
I can effectively "wrap" the text across the five rows the header is relevant to by using a formula to pick up everything except the first 30 characters of each cell. Ie if they type whatever they want in cell B16 then I can use this formula to break it in to 30 character lengths to "wrap" it in to the next four rows:
=IF(LEN(B17)>30,RIGHT(B17,(LEN(B17)-30)),""),
And I'm sure it would be easy enough to use search with the formula to break it where there is a space in the text so partial words don't flow over.
BUT because the text ends up slightly different widths I want to use formats to force only 30 characters to display (whilst keeping the remainder of the text string intact). I can't figure out the syntax to format only 30 text characters to display but you can easily do it with numbers and dates and so on.
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
How to use the xlDialogFormatMain dialog box in vba (Cell Format Dialog Box)?
I don't know the exact require parameters.
Application.Dialogs(xlDialogFormatMain).Show
a formula that I could deduct one time from another and get an answer that gives me the total times in hours and minutes.
So in the case of a person starts work at 7:56:24 and finishes at 15:24:20 - What formula would I need to calculate the amount of hours and minutes worked.
I enter in numbers, eg: 1, 2, 10, 24, 100, 1000 in a consecqutive cell range
They display as: 0.01, 0.02, 0.1, 0.24, 1, 10. Default cell format is general. If I change cell format to Number (with default display of 2 decimal points) it displays: 0.01, 0.02, 0.10, 0.24, 1.00, 10.00. If I also specify no decimal points, it displays: 0,0,0,0,1,10
The only way I can get the numbers I enter to display (and store) as 1,2,10,24, 100, 1000 is to change cell format to text and THEN retype th numbers into the cells. But, then it creates the green error comment in top left of each cell.
Would like to use formatting and no formulas.
View 2 Replies View RelatedWhen I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I'm writing a macro that will automatically change the display in a column of cells.
The input in the cell would be a decimal value, (e.g. 1, 1.25, 1.5, 1.75, 2). As of now, I think the only input options are whole numbers and 1/4, 1/2, 3/4 fractions.
After inputting the decimal value, the cell should update to display the value as the following string format :
Input: 1.25
Displays: 1-1/4"
The purpose being to enable fast data entry while displaying in the desired format.
Here is where I know to begin for the automatic update:
Code:
Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
'
'
'Code
'
'
Application.EnableEvents = True
End Sub
Is it possible to format a cell so that it displays 6x 0's after the number?
I.e. If cell A1 contains the number 14, id like it to display 14000000
However, that 14 million is a monetary value, so I would want it to also display $ , & .
If I change the number the following week to 21, it automatically becomes $21,000,000.00
Ive tried formatting it as a custom, but that only seems to had 6x 0's before the number