I am trying to figure out how to calculate how many permits were pulled by a specific company during certain dates (qtr). My column headers are (a)Date, (b) Builder. My dates are displayed as "Jan-06" but are entered as "1/1/2006".
How can I show how many permits were pulled by a specific builder during a three month period?
SUMIF, COUNTIF or SUMPRODUCT?
I am trying to write a formula for my account statement its got a list of dates of invoices descriptions then the value of invoice.
I want to check the dates of invoice to the date of statement if less the 1 day invoice total to go in a box called current, if between 2 and 30 days to invoice value to go into 1 to 30 days past due, if between 31 and 60 days invoice values to go into a box called 31 to 60 days past due, and then if dates are between 61 days or more then invoice totals go in to a over 61 days over due box.
I have Column A with chronological dates. Some of them will be the same. If the dates are the same then the lowest row of those dates would need to add all the corresponding values in column D and print the total to column E
eg.
A1 through A3 = 2/12/2009
D1 through D3 would need to be added
E3 would display total for =d1:d3
it would then do this for each of the dates that match in Column A
I have a column that contains dates for an event. I would like to tally quarterly and yearly totals for these dates. What formula can I use to accomplish this?
View 1 Replies View RelatedI am trying to calculate a total of a supplier between 2 dates. The total must fall in between the entered dates but the dates can be any given date and not limited to the dates in the supplied list. See attached scaled down example?
View 2 Replies View RelatedI have a range object called tbl which consists of a number of rows and columns of numbers.
I have another range object called e that is the total row just beneath tbl. I want to sum up the total of each column within tbl and put the result in the appropriate cell within e.
I can do it using a for/next loop as shown below but there could be 10,000 rows and a hundred columns in my range which woulod probably take forever. I know there must be another simple way to do it but despite racking my brains and trying various things I can't get it. I'll be very grateful for any assistance.
My current solution is as follows. (e is selected).
'Calculate totals and display them
For g = 1 To tbl.Columns.Count ' the number of columns
h = 0 ' Holds the column total
For f = 1 To tbl.Rows.Count - 1 ' The number of rows
h = h + tbl.Rows([f]).Cells(g).Value 'add the cell value
Next
e.Cells(g).Value = h ' Display the column total
Next
I want to compare cells and use a range of values to calculate totals (i.e. count if cell A1=boy and cell A2 equals either "fat" or "skinny")? Also, I tried using wildcard character "*" in the SUMPRODUCT formula, which didn't work (i.e. if cell A1="boy*" would return at TRUE if the cell contained "boy", "boys", "boy and girl", etc.). Is there a way to include wild card characters in a SUMPRODUCT formula like the ones described above?
View 9 Replies View Relatedi need a macro that will copy pfolio and Totals 0 to sheet2 range A12, (i dont require the headers to be copied), the totals column is not always in Column B it varies, so the macro needs to factor this in. When copying the totals over i need the code to round the totals to 2dp, if there is a 0.00 in sheet 2 then clear cell and move one cell up.
Sheet1 AB9pfolioTotal10KFGEEE3411SDFSFF012ERWER1513REGERG0 Excel tables to the web >> Excel Jeanie HTML 4
Sheet2 AB11pfolioTotal12KFGEEE3413ERWER15 Excel tables to the web >> Excel Jeanie HTML 4
I have a spreadsheet that tracks “points” for hourly associates on a daily basis that totals weekly and monthly. This spreadsheet works on a rolling calendar year instead of a fiscal and I need to be able to capture the totals for periods of time by days.
For example, I would need to view how many points ‘employee x’ has from 2/25/09 through 2/25/10. I have attached the spreadsheet, which includes tabs for each week ending and a summary page.
In column B is a list of dates, which are broken out by fiscal year (FY=7/1/ to 6/30). Column C is a list of dollar amounts. Cell F3 is the query ‘start date’
Cell F4 is today's date, which will be the formula: =today()
Using a date range of F3:F4, I'm trying to get each cell bordered in red to query the dates in column B for each FY; then display the matching sum from column C.
For illustrative purposes I went and manually determined what the values should be displaying as of 7/22. Here are a couple of examples of how I am trying to get the formula to work.
Example 1
FY’08:
Start date- 7/1
End date- 7/22
Searching cells B1:B94, cells B1:B13 fall within the start and end date parameters listed above. Sum of cells C1:C13 is $45,112.00, which should display in cell F6.
Example 2
FY’09:
Start date- 7/1
End date- 12/13
Searching cells B95:B222, cells B95:B149 fall within the start and end date parameters listed above. Sum of cells C95:C149 is $150,873.03, which F7 should display in cell F7. How to I type up this formula; its way more challenging that I first thought!
Here is my set up:
A2 to BF2 is a range of dates
A3 to BF3 are sales. Days without sales are 0.00
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
In Cells B2:B100, i have dates that which have been entered using a combo box (the dates type is for e.g. 14th March 2010 format)
I want a formula that will count the cells that have dates between 1st April 2010 to 30th June 2010 in cells B2:B100
Also, I would like a formula that counts weekend dates between 1st April 2010 to 30th June 2010?
I have a masive table of dates (the date is created via a if formula)
what i need is so wheni enter 2 dates in 2 cells the system checks all the dates between the two specified and then returns the contents of them to a small area on the page.
Dates To Test 14/08/2026 19/08/2026
Results
14/08/2026
15/08/2026
16/08/2026
17/08/2026
18/08/2026
19/08/2026
Table..............
i dont mind using script or anything like that, i dont have much knowlage of it but do have coniderable understanding of other langages and usually figure it out :D
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedTrying to count how many days from a set range of dates are within another range.
So for example, the first two dates, 7/29/2014 - 8/5/2014 would be 6
7/31/20148/6/2014 are the set dates
Count Days Within Range.xlsx
I tried to do this using a IF THEN formula but it doesn't work or more likely I am not writing it correctly or its not the right formula to be using. It's on the attachment.
I have a worksheet that has dates starting from "1/5/2004" to "1/18/2010". Each date is listed in column A.
I want to convert all the dates from MM/DD/YYYY format to only MM/YYYY and have it appear in column B.
The kicker is I need excel to recognize all dates that fall out between"01/01/2004 to 01/30/2004" only as 01/2004 and not 01/01/2004 or 01/30/2004 so on and so forth for each subsequent month and year.
How can I create a custom autofilter that will show me dates within 30 days of today in Excel 2003?
View 3 Replies View RelatedI am trying to solve a a problem that I am having.
I have a list of projects in one column and start dates in a different column.
I want to create a dashboard that breaks down projects by month, quarter and year to date.
I have tried various formulas centered around CountIf. Bottom line is I want to review a column of dates and determine how many projects started last month, etc.....
How do I sumif the date falls between two dates in a quarter.
For example Date of Activity - CellBG43 = 10/10/2008
I want to sum the corresponding Cell BJ43 with cost associated with the activity if the date falls between "01/10/2008"and "31/12/2008".
I tried =sumif(BG43,">=01/10/2008 and <=31/12/2008",BJ43), =sumif(BG43,">=01/10/2008 & <=31/12/2008",BJ43) and it didn't work.
I am making a spreadsheet using excel 2003 to calculate sales and tax. Column B is formated for date (1/1/2010). Column D,E, and F are formatted for currency with column D=Total Price, column E=sale price, and column F=tax. In column B I type the date the transaction took place and in column D I type total price. Columns E and F are automaticly filled in with the formulas for same. In column H,I J row 9 I would like to calculate 1st Quarter Total Price, Sale Price, and Tax. Row 10 would hold 2nd Quarter info and so on. I searched for info but can't come up with any thing that works.
View 3 Replies View RelatedI have an array set up like so: ....
View 13 Replies View RelatedIn our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have searched through a lot of other posts, but I can't seem to make the recommendations work for my given scenario. I have a sheet that compiles information for different dates (based on a query that is run by the user), and in column H I have a start time that is listed in this format "m/d/yyyy h:mm."
What I need to do is find all of the unique dates "m/d/yyyy" from this given range, and return them in column O.
For example, I will have the following information:
Start Time
4/17/2008 17:19
4/17/2008 17:30
4/17/2008 17:31
4/17/2008 17:34
4/18/2008 17:23
4/18/2008 17:24
4/18/2008 17:26
4/18/2008 17:26
4/19/2008 7:43
4/19/2008 7:43
4/19/2008 7:47
4/19/2008 7:47
4/19/2008 7:47
4/19/2008 7:48
4/19/2008 7:48
and I need to have the following appear in Column O of my spreadsheet:
4/17/2008
4/18/2008
4/19/2008
There may be as little as one unique date, but there I don't want to set a limit of how many can return as it is based off of a user query.
Here is an example of what I am trying to do. I have a date in column A on Sheet 1. In Column B I want to return the period for which that date falls.
I have created a list of Start and End dates for each period in Sheet2. The start date is in Column A of Sheet2. The End Date is in Column B. And the resulting Period is in Column C.
Basically if the Date in Sheet1 Column A falls in between the start and end date for a specific period. I want that period returned in Column B of Sheet2.
Ok my opening Date for an account is for example 200204 (that is the way it is written in the database for all accounts YYYYMM) Now what we want to achieve is to have a macro that fills out a column in a spreadsheet taking into consideration the opening date until it reaches lets say 200601.
so this is what the result should look like
A
1 200204
2 200205
3 200206
.
.
X 200601
how do I let the Macro know this is a date so as to add a month until it reaches the final date. I've managed to create a loop but I know it probably isnt the best way to write it
Dim lCount As Long
Dim lNum As Date
lCount = 0
lNum = Sheet1. Range("D2").Value
Do While lNum < 200601
lNum = lNum + 1
lCount = lCount - 1
Loop
I have a problem for extracting dates of leave from the attendance. A sample WB is attached. In the attached WB, I want to extract date(s) on which leaves were taken.
View 9 Replies View Relatedcreate a dynamic named range with dates.
Example file. !
Dynamic-test-sheet.xlsx
I need an dynamic named range for column B(Project) with a date criteria.
so for example: I need a range with all records from Colomn B(Project) from year 2013.
I want to use this range to filter all unique projects by year.
I have already a filter/formula to collect a unique list of all projects.
see the attached workbook. The "data" sheet is the raw data for individual sales orders. Column A has the SKU for the item, and there are also columns for quantity sold and the date sold.
Column A of Sheet 1 is a list of each individual SKU (no duplicates). What I'd like to do is search through the data sheet and total up the quantity of each SKU sold for several individual months. There is also a column that would display totals for the past 30 days (with "today" as day 30).
I would like to know the function/syntax for determining the due dates given certain date ranges.
See attached sheet for the example : due dates example.xlsx‎
I have a start date, and an end date for a promotion. However, I am trying to create some unique keys for a VLOOKUP, so I can combine the data I have by day, with the data I have for promotional start/end dates.
So, simple question, if I have a start date and an end date, is there was way (either using excel or vba) to pull out all the dates within that range and display them on a spreadsheet?
For example, I have 21/01/2012 and 28/01/2012 as the start and end dates. I would want to display 21/01/2012, 22/01/2012, 23/01/2012 etc.