Looking to take an array of cells and paste them from left to right as right to left. for example if I have 3,2,4 and want them to be 4,2,3. The paste special option will make them vertical and then horizontally but not how I am expecting them to be.
View 5 RepliesI have a spreadsheet which the data looks like the below. The below example has been filtered using subtotal function...
View 9 Replies View RelatedI received this code from Joe a while back and it works soooo wonderfully, I thought I might be able to apply it to another fun activity. I'm having trouble understanding most important part of the code - in red (go figure)....can someone translate? the original thread was here: http://www.mrexcel.com/forum/showthread.php?t=325705
Sub MyNewFormatMacro()
' Copies data from Sheet1 to Sheet2 in new format
Application.ScreenUpdating = False
Dim myNumColumns As Long
Dim myNumRows As Long
Dim c1 As Long
Dim r1 As Long
Dim r2 As Long
' Determine number of columns from number of titles in header row
Sheets("Sheet1").Activate.......
Let’s say I have a 20x6 array. For a known value in column 1, I could find the corresponding value in any other column by using the vlookup function. What function might I use if I wanted to locate a value in column 1 and update the cell in the same row in column 4 and column 5?
View 4 Replies View RelatedI have the following code that i want to use to run trough a few checkboxes to check the value and then wright something in a cell. i have written the the checkbox name to a variable and then want to use it in the if command but gives me a type mismach.
Code:
Dim CheckBox As String
For i = 1 To 204
For c = 3 To 227
CheckBox = "Sheet3.CheckBox" & i & ".Value"
If CheckBox = True Then
Range("J" & c) = "Done"
Else
Range("J" & c) = ""
End If
Next
Next
The code below is part of a program i'm trying to create. The first part of my program creates and 16 by x array where x is the number of rows from splitting up a string from a text box. Now that I have that part completed. i wanted to add the information back into a new sheet. I tried writing this code but when i get to the point of filling the cells with a value it gives me a range error.
Code:
For p = 0 To UBound(Detailarray)
For q = 0 To 15
Sheet2.Range(Cells(p + 1, q + 1)).Value = Detailarray(q, p)
Next q
Next p
End Sub
currently i am using
Range("A1").Resize(Len(sChars) ^ iChars).Value = saPermut
what would be a way to do this when the value exceeds 65536?
perhaps to go on to the next column?
Is there any way in VBA to assign a range of cells to a specific dimension of an array? For example: I have dblArray(1000,7). I want all the values of the eighth slot (xxx,7) to be put into a column on a spread sheet. So, i am looking for a quick piece of code that will look (Mine's in psuedo) something like:
range(cells(1,1),cells(ubound(dblarray,1)) = dblArray(XXX,7)
Obviously the XXX part wil not work for a static number (ie, all the range will be filled with one value form the array). I know how to paste a whole array into cells, and know that i can make a workaround with more code if need be, but this seems like a far simpler answer could it be achieved with a line or two of code, and I'm all about performance. I've stripped google clean looking for the answer, but can't find any info...
I have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
View 9 Replies View RelatedI am very new to VB (and self taught), so sorry for the simplistic question.
I have searched through the forum but I cannot find a simple way to print the values of an array in VB to cells in an Excel workbook.
I have an n x m array and i need to print the first column to cells A1, A2,...,An. What is the simplest way to do this?
I am having a ton of trouble with this. I am trying to add a single text row in between existing data. I have tried multiple loops to try to place an array into Column G, but I cannot figure it out. Is there some coding that will produce the sort of result below in column G?
View 6 Replies View RelatedIf I have an assortment of odd and even values in range a1:j100, using the Array formula {=If(Mod(a1:j100,2),"",a1:j100)} will clear out all the odds, leaving the evens.
Is there a way I can add to this formula to color the qualifying cells (odds in this instance)? I know Conditional formatting is perfectly suited for the job but I am looking for a departure from this.
I am trying to do is, to sum up the values in an array, given that the cell value is not an error.
If the cells were in order, the following array formula would solve it easily:
{SUM(IF(ISERROR(A1:A3),0,A1:A3))}
But my problem is that, my cells are not in order. To be more specific, I want to look at A1, B12 and C13, and sum them up with an array formula given the condition that cell value is not an error. Of course, in my case, I have too many cells.
I'm trying to do a SUM array to count the number of instances where Column C AND Column D are equal to 0, but are NOT BLANK.
I tried the formula:
=SUM((C:C="0")*(D:D="0"))
But the answer comes up 0. However, if I use the formula:
=SUM((C:C=0)*(D:D=0))
The answer includes blank cells (as I assumed it would).
How do I get a SUM array to count only numerical zeros?
PS: If there's a much easier way to do this, I welcome those comments as well, though if it can be done in SUM array I'd love that answer as well.
I am trying to use the below code to fill a combobox with unique values. It works great except I can't figure out a way to replace BLOCK 1 with BLOCK 2. I want to use BLOCK 2 to populate mgNames so that only specific values are filled into mgNames. Currently BLOCK 1 just fills mgNames with an entire range without any conditions. how I can get BLOCK 2 to work in the way i'm intending it to?
Code:
Sub findNames()
Dim mgNames As Variant
Dim myCollection As New Collection
[Code]....
I have the following problem:
In cells A1 to A4 I have 4 numbers (8,7,12 and 15).
In cells B1 and B2 are the numbers 1 and 4
Now I want to use the max function to find the highest value in the cells A1 to A4. But instead of typing =max(a1:a4) I want to use other cells that tell excel where to look. What I exactly want is to say =max("a"&B1:"a"&B2) because in B1 and B2 the rows are indicated from which to which excel shall find the maximum.
I'm trying to set a range variable ('IngFore') as equal to a number of rows long and a number of columns wide via 'Cells'. The range needs to be dynamic in that the total number of rows and columns will vary over time. Hence, I've defined 'lastdate' to determine the last row in the array, and 'lastcol' to determine the last column in the array. The starting point for the array is I12.
It would appear that I can't quite get the syntax right.
Code:
Set IngFore = (Cells(12,9 to lastdate,9)),(Cells(12, 9 to 12, lastcol))
I've tinkered with it here and there, removing and adding brackets but I can't get it to work.
I have 68 cells per sheet and approximately 70 sheets that i need to change to an array function.
Ive changed the formula used using Find and replace but now I need to convert ALL those cells to array.
Is there something I can use to change them all at once. Or am i going to have to go into each cell and F2 CTRL SHFT ENTER?
I am trying to find compare the value in one cell with an array of cells. My problem is when I try to carry the formula down to the next line - my array changes as well. For example:
Before
After
01915
[Code].....
So, if Before is Column A and After is Column G, the formula I have right now is =INDEX(A2:A3349,MATCH(G2,A2:A3349,0)). When I try carry the formula down to G3, G4 and so on, the array changes as well.
Is it possible to just sum visible cells only within a desired column or selected array?
I have visible cells in Column C10:C90,
I have named cells. Rw1, Clm1 and Blk1
I have the numbers 1 through 9 in cells A1:A9
I need to create formulas to find a certian number.
Example:
A2 would have the value 2
If $A$2(value 2) is in Rw1 or Clm1 or Blk1 then "" if not $A$2
{=AVERAGE(IF(('Sales Reports'!$A$1:$A$5000=$A3)*('Sales Reports'!$C$1:$C$5000=$C$1),'Break Reports'!$D$1:$F$5000))}
and am copying it to other cells using this
Sub copyformula()
With Sheets("Sheet2")
.Range("B3:B5000").Formula = .Range("B3").Formula
End With
End Sub
It does the copy but removes the { and } thus rendering the formula useless to me. How can I accomplish this task and keep the formula as an array formula?
I tried to drag the formula down and recorded it as a macro but when it runs it takes far to long.
I m trying to use arrays in the wrong way. I simply want to create an array from values in a column and perform calculations on each element and store the results for each element. I therefor need a 2d array. I also dont know the number of values in the column and therefor dont know the number of elements that will be in the array. How would I declare this array. Ive tried Dim MyArr(1 To ActiveSheet.UsedRange.Rows.Count, 1 To 2), but that returns an error - 'Constant expression required'.
View 6 Replies View RelatedEssentially I have inherited a spreadsheet which is crammed full of complex array formulas.
No problem in itself as I understand array formulas pretty well (or so I think!). My problem is that when i want to ammend some of these, i cannot easily see what range I need to highlight in order to edit them i.e. I obviously cant do a single cell as its part of an array. I hope I have made myself clear?
So my question is this.
When the cursor is sat in a cell that is part of an array formula, how can I easily find out ( ideally by the array formula range being highlighted in (say) red ) what cells are included in the array formula?
Would conditional formating do the job?
I have a range of cells that I want to use as column headings. Say the range is A1:A100. I need them to be able to be transposed across the first row of the sheet. Now I know that I can use the transpose function in a cell but this array is embedded in a macro.
View 3 Replies View RelatedI have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
Here's how the sheet is set up- row 6 is a header row with four repeating column heads- year, value1, value2, value3. So year is in col A, E, I, M, Q, etc. up to FM. Value3, the one that I want totaled is in col D, H, L, P, etc up to FP. Each year column begins with a different year, (with some repeats) but each is 141 rows long, so that the first study begins in 1994 and ends in 2134, the second is from 1985-2125, the third is from 1991-2131, etc. I want excel to find all the value3's from 2007 and total them, all the value3's from 2008 and total those, up through 2145. The data range is A7:FP147. I tried adjusting some of the suggestions, but no luck. I was thinking I'd have column FQ with all the years 2007 on, and FR by the total of all the value3's from that year.
I have attached what my problem is. Have a look, and let me know what you think...have spent hours trying INDEX, MATCH, IF, ISTEXT...
JamesExcel problem.pdfExcel problem.pdf
Using VBA, I am importing data from Access (Access2007) into Excel. The code that I use works as required but I need to refine it so that I can filter for the records that I need to import. I can import ALL records. I can import selected records by manually changing my SQL query. I would like to reference an array of values or a range of cells so that I do not need to manually change my query every time I want to run it.
[Code].....
This code gets all records for "Jeff" and "Bob" from the Access database. I need to query about 100 names at a time so manually inputting them is going to take forever. How I can make it work?
By using an array:
[Code].......
or
by using a range of cells:
I want a macro that if a certain cell on a row in column F on my worksheet is "6" then copy the cell in columns B and H on the same row are to be copied into an array and then when the loop is done, display the copied cells in a msgbox.
Is there a simpler way to do this without fidgeting with an array?
I am drawing a total blank here, lets say I have a column of cells:
A1 ("Word")
A2 ("No")
A3 ("No")
A4 ("Word")
A5 ("Word")
(they all have words in them). How can I return all cells (an array?) that contain a specific word?
=COUNTIF(A1:A5,"Word")
returns: 3
That function is almost perfect, except that returns a number - I need this to return an array of all of those cells that contain the word. Because I have another function to run after that takes in cells and THEN counts how many are a certain color (this one already works) - so it obviously cannot take in a number, it needs a list of cells
So it should return:
A1,A4,A5
But I'm not sure in what format