Is there any way in VBA to assign a range of cells to a specific dimension of an array? For example: I have dblArray(1000,7). I want all the values of the eighth slot (xxx,7) to be put into a column on a spread sheet. So, i am looking for a quick piece of code that will look (Mine's in psuedo) something like:
Obviously the XXX part wil not work for a static number (ie, all the range will be filled with one value form the array). I know how to paste a whole array into cells, and know that i can make a workaround with more code if need be, but this seems like a far simpler answer could it be achieved with a line or two of code, and I'm all about performance. I've stripped google clean looking for the answer, but can't find any info...
I currently have an array which I populate and paste in a sheet named "T1" using a macro. my current macro uses the rowcount function to determine the used rows and pastes the array from the next available row. The problem i am having is that when I paste this array multiple times, the arrays need to be spaced by a row so that i can differentiate different submissions. this is what i have so far,
Sub CopyData()
Dim Truearray() As String Dim cell As Excel.Range Dim RowCount1 As Integer Dim i As Integer Dim ii As Integer
For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?
I have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
Usually if I filter and perform some kind of operation on the cells displayed by the filter it is only these cells affected. For example, if I run a filter that shows 10 rows and I Paste a value into say, Column A, of all 10 Rows then remove the filter and look through all my rows, only the 10 cells displayed during the filter contain whatever I Pasted in.
However, sometimes when I do this many rows that were not displayed as part of the filter are affected. For example, I Paste something into my 10 filtered Rows and after removing my filter I find that whatever was Pasted into the 10 cells is now in 200 cells.
How can I be sure that any changes I make to a set of filtered cells are ONLY applied to those cells?
I did the following, and get an error message, that itself seems erroneous.
Steps: In the source sheet, i selected A9:G9, copied. In the destination sheet, I selected A9:G9, and then "paste formatting" In the source range, I selected the same cells, A9:G9, and copy In the destination sheet, I selected A9:G9, and "paste values"
But, at "paste values" two error alerts come up (and the operation fails):
"The operation requires the merged cells to be the identical size" "The information cannot be pasted because the copy area and the paste area are not the same size and shape"
Within the range, cells C9:D9 are merged. On the destination sheet, before i try to paste values, the cells that I am pasting into appear to be identically merged, if you just arrow by them, the cell highlighted is merged, and "Merge and Center" is highlighted in the ribbon.
So, I do not understand why i cannot paste in this case, since it would all appear to match up properly.
Upon further investigation, it appears that i cannot "paste values" with any cells along with the merged cell, in the same operation. If I only paste the merged cell alone, with "paste values" it works. But, if i add even one cell on either side, it fails in the same way, even though the selected paste region exactly matches the selected source region, in terms of what cell is merged.
I`m trying to do is paste a formula accross multiple columns whilst skipping the empty cells. I tried using the "skip blanks" tick box but it still filled in the empty cells??
I have a set of four sheets that each act as a wall planner type of calendar (one for each team of staff) all in one workbook. I have a sheet that acts as a key where cells on the key display different types of holidays e.g. Annual Leave, Unpaid Leave etc. Normally the user would select the cells where they wish to take the time off against their name and go to the "key" sheet, copy relevant cell and go back to their team sheet and paste. I want to put all this into a macro to be used on a customised button on the menu bar.
I am able to do this with one sheet ( I simply put in the code the name of the sheet that I previously selected) but I don't know how with four sheets. How do I say go back to the sheet I previously selected.
I have a repetitive task that requires a macro. I need to copy and paste data from my clipboard to separate cells. The clipboard will always consist of 6 data entries delimited by Tabs, like this:
Name 212.412 161.000259.000103232.000 16.902
BUT, I only need to paste columns 2 and 6, so that they appear next to each other like this:
212.41216.902
Writing a macro that can accomplish this? Right now I have to paste using the Text Import Wizard, but I have over 6000 of these instances I need to paste
I have a formatted budget vs actual income statement that has subtotals in the appropriate spots. I would like to be able to paste over the entire column with updated data, but not write over the formulas. For instance, in one spreadsheet I have the data for the month of June and in another I have the data for the month of July. Both have the same number of rows, but are formatted slightly differently. I want to be able to replace the June data with the July data. My first thought was to lock the cells with the formulas, protect the sheet and then paste over the entire column, but I get the following error:
The cell or chart that you are trying to change is protected and therefore read-only.
To modify a protected cell or chart, first remove protection using the Unprotect Sheet command (Review tab, Changes group). You may be prompted for a password)
my data is having blank cells. when I am trying to paste it in other column it is getting pasted as it is. I don't want to copy the blank cells. It should be like Col B.
I am using excel 2007 on a 64 bit windows 7 machine if that matters.
Anyways, I am trying to copy a range of cells from one workbook and then paste that range into another workbook, but ONLY on the visable rows in that notebook.
The first workbook has no hidden rows so I don't need to do any go-to specials to copy them, but the second one of course does have them.
This is a simplified example.
- Workbook 1 has column A with cells 1-10 with data in them that are going to be copied
- Workbook 2 also has a column A, but it has information in cells 1-15 with cells 6-10 hidden from view.
- The copied data from workbook one needs to only land on the visible cells (read: cells 1-5 and cells 10-15)
i have selected cells from workbookA (b2:b8) , i want those selected cells gets pasted in workbookB in a transpose way.
like B1 cell in workbookA pasted into A2 cell in workbookB , B3 cell pasted into D2 , B4 cell pasted into B2 and B5 cell pasted into G2......
i have code but not working
Code:
Private Sub CommandButton1_Click() Dim STRFILENAME As String Dim O As Workbook Windows("Copy of Bill Schedule Form1.xlsm").Activate Sheets("Sheet1").Activate ActiveSheet.Range("b2:b8").Select
Yes, I am a newbie to VBA. I've tried for hours now to come up with code to make this work, but no go.
Here's the situation:
There are a list of cells all in column A (row ? - ???) that have a string that needs to be searched to locate a number, and insert that particular number into a cell in another sheet, which is in another workbook.
The numbers needed from these examples would be: 1,436 215 282 End results:Trip 001 = 1,436 Trip 042 = 215 Trip 03A = 282 FYI...The cell data always starts with *, and is followed by three characters we refer to as a Trip, then a space, and then RJ. The column with the data is always "A", but the starting row may not always be the same. The rows continue down one by one, but there may not always be the same number of rows (each row used will ALWAYS start with an asterisk, though.) The number that needs to be extracted is always between the 4th and 5th spaces - CHR$(32)'s. The numbers, once found, then need to go in another sheet into one of the following cells - C28, C29, C30 or C31. Which cell the number goes into depends on which one of the cells, C28-C31, matches the three character Trip text shown after the *. There are currently 16 different sheets that need to be searched to find where the matching Trip number is. The sheet names do not change. and yes, the people always enter everything shown in the example into one cell.
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
So i have sheet 1 with some cells locked and protected (but open to copying) as a template and sheet two will be where people paste one or more of the template formula on an ongoing basis. How do i mantain the locked and protected cells after they have been pasted? I have unlocked sheet two pasted the first template and had to choose protect cells after pasting, and further pasting of locked cells are not protected.
we are working one a Huge database with two other partners. its players name for football clubs and we want to translate them to our langugae. b so one of my partners translated La liga player , and other Premierleague , and me Calcio . but players were sorted randomly . Later when we finished it we faced a huge problem . we couldnt paste all three translation in on file because when you past the cells in an excel file to another it pastes all cells together also empty once. when it paste empty once it removed the filled one too from previous excel file .
More declaration :
for example I filled cell number 1,3,5 and my partner filled 2,4,6 when we try to put 1,3,5 cells into my partner , we have to copy each sells alone and we cant copy all because it will delete , 2,4,6 cells
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
I need to search column C for the text "X". If an "X" is found, I need to copy the text from the cell directly left of it and paste it into a seperate worksheet into cell B2, then go back to the original worksheet and delete the cell with "X" on it and the cell to the left.
I don't want ppl to be able to paste values in cell - them must either type the data or select from list.
Also - the sheet is protected but col a is open
have tried...without success
Code: Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Not Intersect(Target, Range("A1")) Is Nothing Then Application.CutCopyMode = True End If End Sub
I've got a table that has to be manipulated by multiple users. Within the table I have several column ranges with validation lists (in drop down boxes) in order to limit responses. However, I'm finding that most of the users are pasting data in from other sources that may not have been in the validation list, or may be in a different format, etc., and it essentially undermines the reason for using the validation.
I've tried protecting the sheets using various options and tried looking around online for a solution, but I'm not finding how to get around this.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
I have productivity data sheet of employees for a month and want to update in a tracker sheet.Every productivity sheet has 5 columns containing numbers.Since its monthly it would be contain 30-31 rows and.I want to copy this data then go to tracker apply filter with respective employee name and paste it there.Is there a way to do this using vba code?
I have prepared vba code to copy paste individual rows from productivity sheet to tracker.But preparing row by row code makes it way too big.Hence i am looking for another solution.
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
I am trying to paste data into cells that are offset from specific data in my excel sheet.
The code I've got so far is:
[Code] ....
What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.
I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.
