Sub TrimSlashesToRight()
Dim cell As Range
For Each cell In Range("AN2:AN2000")
cell = Left(cell, InStr(cell, "//") -1)
Next
End Sub
I cannot get it to run this, it always crashes on
cell = Left(cell, InStr(cell, "//") -1)
It will work fine like:
cell = Left(cell, InStr(cell, "//") + 0)
but then it leaves the first / in place, i want it to start deleteing before both //.
In cell B8 - I have a cell with the following info:
Mr A. Jones
4 spaces, ' Mr A.' , 4 spaces and 'Jones'
In order to Trim Only on the spaces to the left of the first letter in the cell I am using the following formula:
=MID(B8,FIND(LEFT(TRIM(B8)),B8),LEN(B8))
Can anyone tell me if there is an easier ay to do this ( I'm sure there must be )
Sub GetThatstring()
Dim strMonth As String
Dim iYear As Integer
Dim StrMnthYear As String
strMonth = Trim(Left( Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare)))
MsgBox strMonth
iYear = Mid(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 1, 4)
MsgBox iYear
StrMnthYear = Trim(Left(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 4))
MsgBox StrMnthYear
End Sub
I have a column of cells likes:
5/5058 Jack Daniels
5/29AA Crown Royal
I want to delete everything to the left of the first space.
So it will look like:
Jack Daniels
Crown Royal
It has to be vba though. I have done alot of trim in just formulas but this is first time in VBA. The above code is one I found by searching but not sure what to do to modify it.
This will be for range AM2:AM2000
I need your guys expertise in the following formula. I'm applying the following to a large range of data that varies in lenght,however all of the data has a 1Y or 2Y at the end of it. I need to remove it from the data into a new column. Currently I'm using =trim(mid(A2,1,30) how can I change my formula to obtain my results?
for example: Nationwide Select premium $74.99 1Y
Nationwide Select Premium W/e-mail $74.99 1Y
As you can see the lenght of the data is different.
I've spent way too much time trying to figure out this simple thing. Doh! I have a text string that may have one or more CR and/or LF characters on the right. Unfortunately, RTrim doesn't remove CR/LF characters.
Is there an easy way to do something similar to the following that will remove the CR/LF characters?
[Code] .....
i have a device that produce its data as following:
NTFLog_D2013-02-12_T104016.csv
I need to divide the single column to 7 column as separated by semicolon ";"
I have some code that run on Excel 2003, and fail on Excel 2000. It happens on functions Left, Right, Mid and Trim. I've found that I must use in "Late Bindings".
If exist any convertion for above functions?
Pretty sure this has been asked but have searched the forum to no avail, but I need to extract the numbers from a value which has a letter on the end.
eg. 1000x I need to get out the 1000
or 2p I need the 2
I have sooooo many values ranging in numbers of digits, so just basic left(A1,2) won't work, I'm sure I've seen a search or find function but don't know how to use them!
I've created a user form that has a list box populated with a fairly standardized format - a product ID or model number followed by a dash ( - ) then followed by a description. Based on the users selection of an item in the listbox, certain rows will be copied over from another tab in the excel file.
An error occurs when a Model Number list box item is selected but not when a product ID is selected.
The difference between the two are AlphaNumeric vs only numeric.
USBLT15CMB - Product Description 1
1121 - Product Description 2
the code is:
Private Sub CommandButton1_Click()
Dim ID As Long
Dim Row As Long
Dim Cnt As Long
[Code]...
The macro stops on the ID = line
How do I return the Nth Character in a cell starting from the left.
For example, cell A1 has the word "Baseball". What formula will give me the 6th character to the right, which would be "a"?
Could someone tell me if the following formula is valid?
=AND(F15="R*", I15>0)
I want to know if F15 contains 'R' or 'RW' but using a wildcard always returns false whether this correct or not.
I want to select email addresses in a particular cell. Since every email address will contain @ so I want to extract the email address from the cell on the basis os all the characters to be selected on the left & right of the '@' before a space is encountered.
Eg
If the cell contains the below values:
91 121 5158123 / 5159123, 011 5103710
91 999 999 1123
info@designs.com
I only want the email address to extracted to the next cell. i.e. info@designs.com
I can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View RelatedI'm trying to use logic to identify trends...in each of the strings below, I want to count the occurrences of the left most character appearing consecutively. The answer is to the left
I'm trying to do this via a formula vs. vba if possible
BBBBBBBBBBBBBBBBBBB - 19
BBBDUDUUUUDDBBBBBBB - 3
UUDUDDUUUDUDBBBBBBB - 2
UDUDDUDUUUDDBBBBBBB - 1
[Code] .....
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE()
Dim myRange As Range
Dim myRow As Range
Sheets("CAMPAIGNS_2007").Select
Set myRange = Range("2:30")
If myRange Is Nothing Then Exit Sub
Application. ScreenUpdating = False
myRange.Replace What:=Chr(160), Replacement:=Chr(32), _
LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
For Each myRow In myRange.Columns
If Application. CountA(myRow) > 0 Then
myRow.TextToColumns Destination:=myRow(1), _
DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
End If
Next myRow
Application.ScreenUpdating = True
End Sub
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
To all sifus out there, how can i transfer from these:
NAS517-3-2
-41353913
NAS517-3-5
NAS517-3-4
-42MS27253-2
-43353908
-44357182
To these:
NAS517-3-2
353913
NAS517-3-5
NAS517-3-4
MS27253-2
353908
357182
I have got a list of numeric abbreviations, for instance 10739011/21/31/41. What it should really display are the numbers 10739011, 10739021, 10739031 and 10739041 (the first six figures stay the same). All the numbers in my list are 8 figures long. I want to change the list from the list seperated by the backward slash to the complete numbers. I have uploaded an example of the list with backward slash between the numbers. Is there a way that Excel can automatically change these numbers to the full numbers?
Because all the numbers are 8 figures long, I thought the first 6 figures of the 1st number can be copied and those 6 figures pasted before the other two figures after the backslash. Auto Merged Post Until 24 Hrs Passes;sorry, pressed OK too quickly. The problem is that there are sometimes 4 numbers in the cell, sometimes 6 and once three. I would like Excel to complete all the numbers in the cell and then move on to the cell underneath it and so on. Also, I would like each number to have it's own cell.
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1()
Dim list As String, pos As Integer, refl As String, refr As String, newlist As String
list = Cells(1472, 16).Value
pos = InStr(list, "+")
refl = Left(list, pos - 1)
refr = Right(list, pos + 1)
newlist = "[" & refl & "]"
Cells(1472, 17) = newlist
End Sub
I have part if the code here’s
PHP
Range("f" & indexI + 1).Value = Format(Strl, "00:00")
to return value = time formats
How do I modify it to + 0.1 minus?
Sample
IF the return value = 12:00:00
Now I wanted = 12:00:01
I would like to have a simple basic VBA trim function with no complications at all. Just a simple trim vba code like:
=trim( Selected/Active cells)
But I just couldn't think of how to do it, even with recording.
Sample of Column A:
Sat 15th Sep 07 14:15 Bath Rugby 29 - 15 Worcester Warriors Recreation Ground 10,010
Sat 15th Sep 07 15:30 Harlequins 35 - 27 London Irish Twickenham 39,400 Report
Sat 15th Sep 07 18:00 London Wasps 19 - 29 Saracens Twickenham 39,400 Report
Sun 16th Sep 07 15:00 Bristol Rugby 13 - 26 Leicester Tigers Memorial Stadium 8,125
Sun 16th Sep 07 15:00 Leeds Carnegie 24 - 49 Gloucester Rugby Headingley Carnegie
Sun 16th Sep 07 15:00 Newcastle Falcons 33 - 12 Sale Sharks Kingston Park 5,859 Report
Trying to display in column B and C:
Bath Rugby Worcester Warriors
Harlequins London Irish
London Wasps Saracens
etc....
Because of the varying length of text each time,
i'm having problems doing this.
Tried =MID(A1,FIND(":",A1)+4,25)
but obviously get extra text other than team name.
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies View RelatedHow can i produce "tan to -1 " in excel ?
View 9 Replies View RelatedI use a formula that has a date in it 11/15/13 for example. Then I have a formula that calculates "days" (15), but I want to subtract one. How do I do that?
View 2 Replies View RelatedHere is my formula.
=If(Sheet1!J5=$J$4,0,(Sheet1!$J$4-Sheet1!J5)*Sheet1!$J$1)
It is perfect, except it doesn't have one final step. What I need it to do
is be able to do that ONLY if it is greater than or less than by a specified
amount. So there needs to be a modification of ... Sheet!J5<> (but by 100 or
any other number that I set) $J$4,...
I want to be able copy certain things from cells. Is there a way to make excel copy only the name from cells containing this (One name in each cell):
VESNINA E. (RUS)
PAVLYUCHEN. A. (RUS)
KERBER A. (GER)
I basically want to cut out the (...) in all names. I could do it manually, but there could be quite a few players.
I would like to have in a title cell "The Week of 8/24/09 - 8/28/09". I want to use something like this
View 2 Replies View Related