Removing Character Using Trim..
May 12, 2009
I need your guys expertise in the following formula. I'm applying the following to a large range of data that varies in lenght,however all of the data has a 1Y or 2Y at the end of it. I need to remove it from the data into a new column. Currently I'm using =trim(mid(A2,1,30) how can I change my formula to obtain my results?
for example: Nationwide Select premium $74.99 1Y
Nationwide Select Premium W/e-mail $74.99 1Y
As you can see the lenght of the data is different.
View 5 Replies
ADVERTISEMENT
Apr 25, 2007
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE()
Dim myRange As Range
Dim myRow As Range
Sheets("CAMPAIGNS_2007").Select
Set myRange = Range("2:30")
If myRange Is Nothing Then Exit Sub
Application. ScreenUpdating = False
myRange.Replace What:=Chr(160), Replacement:=Chr(32), _
LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
For Each myRow In myRange.Columns
If Application. CountA(myRow) > 0 Then
myRow.TextToColumns Destination:=myRow(1), _
DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
End If
Next myRow
Application.ScreenUpdating = True
End Sub
View 8 Replies
View Related
Jun 29, 2007
Sub TrimSlashesToRight()
Dim cell As Range
For Each cell In Range("AN2:AN2000")
cell = Left(cell, InStr(cell, "//") -1)
Next
End Sub
I cannot get it to run this, it always crashes on
cell = Left(cell, InStr(cell, "//") -1)
It will work fine like:
cell = Left(cell, InStr(cell, "//") + 0)
but then it leaves the first / in place, i want it to start deleteing before both //.
View 4 Replies
View Related
Jan 31, 2014
I've spent way too much time trying to figure out this simple thing. Doh! I have a text string that may have one or more CR and/or LF characters on the right. Unfortunately, RTrim doesn't remove CR/LF characters.
Is there an easy way to do something similar to the following that will remove the CR/LF characters?
[Code] .....
View 5 Replies
View Related
Dec 2, 2013
i have a device that produce its data as following:
NTFLog_D2013-02-12_T104016.csv
I need to divide the single column to 7 column as separated by semicolon ";"
View 2 Replies
View Related
Sep 23, 2009
The barcode lablels all have the following format: A318639....that is a letter followed by six numbers.
When I scan the barcodes into any cell, a dollar sign "$" appears in the front of the barcode string that is entered into the cell. The dollar sign is not a relevant part of the string of characters in the barcode label.
What I am looking for is a solution where upon scanning a barcode into any cell, the dollar sign is removed from the front of my string and I am left with just the seven character string which is shown above.
I have experimented with the Data Validation tool by trying to limit the number of characters that are allowed in a cell to seven characters, but that has not actually removed any characters from my data string.
View 9 Replies
View Related
Feb 4, 2014
where i copy up to 1000 products ID's like this: "1234567890 AA11111"(ofcourse there is allways differend code for every product its just a example :)) and paste it to exel, and the problem is i need only the 10-digit number (it's allways 10-digit number but the second one is sometimes diffrent) so it is possible to make makro that will remove every character after 10th character ?
View 6 Replies
View Related
Mar 16, 2012
I've got a whole load of cells that have a pipe ( | ) on the end of the value which I'm trying to remove.
Easy enough thinks me, so;
Code:
=LEFT(AB188,LEN(AB188)-1)
And then Copy / Paste Values Still has a pipe on the end... I check the cell for trailing spaces, there are none...
I check the length of the cell (658) against the length of the result from the formula (657)...
So, my formula works, but when I copy and paste as values the pipe remains.
I'm using Excel 2007 and the cell contatins other pipe characters I'd like to keep in there so I can't find and replace or anything.
View 8 Replies
View Related
Nov 27, 2012
To all sifus out there, how can i transfer from these:
NAS517-3-2
-41353913
NAS517-3-5
NAS517-3-4
-42MS27253-2
-43353908
-44357182
To these:
NAS517-3-2
353913
NAS517-3-5
NAS517-3-4
MS27253-2
353908
357182
View 1 Replies
View Related
May 18, 2008
I have got a list of numeric abbreviations, for instance 10739011/21/31/41. What it should really display are the numbers 10739011, 10739021, 10739031 and 10739041 (the first six figures stay the same). All the numbers in my list are 8 figures long. I want to change the list from the list seperated by the backward slash to the complete numbers. I have uploaded an example of the list with backward slash between the numbers. Is there a way that Excel can automatically change these numbers to the full numbers?
Because all the numbers are 8 figures long, I thought the first 6 figures of the 1st number can be copied and those 6 figures pasted before the other two figures after the backslash. Auto Merged Post Until 24 Hrs Passes;sorry, pressed OK too quickly. The problem is that there are sometimes 4 numbers in the cell, sometimes 6 and once three. I would like Excel to complete all the numbers in the cell and then move on to the cell underneath it and so on. Also, I would like each number to have it's own cell.
View 5 Replies
View Related
Sep 20, 2009
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1()
Dim list As String, pos As Integer, refl As String, refr As String, newlist As String
list = Cells(1472, 16).Value
pos = InStr(list, "+")
refl = Left(list, pos - 1)
refr = Right(list, pos + 1)
newlist = "[" & refl & "]"
Cells(1472, 17) = newlist
End Sub
View 9 Replies
View Related
Dec 16, 2008
I would like to have a simple basic VBA trim function with no complications at all. Just a simple trim vba code like:
=trim( Selected/Active cells)
But I just couldn't think of how to do it, even with recording.
View 11 Replies
View Related
Aug 22, 2008
Sample of Column A:
Sat 15th Sep 07 14:15 Bath Rugby 29 - 15 Worcester Warriors Recreation Ground 10,010
Sat 15th Sep 07 15:30 Harlequins 35 - 27 London Irish Twickenham 39,400 Report
Sat 15th Sep 07 18:00 London Wasps 19 - 29 Saracens Twickenham 39,400 Report
Sun 16th Sep 07 15:00 Bristol Rugby 13 - 26 Leicester Tigers Memorial Stadium 8,125
Sun 16th Sep 07 15:00 Leeds Carnegie 24 - 49 Gloucester Rugby Headingley Carnegie
Sun 16th Sep 07 15:00 Newcastle Falcons 33 - 12 Sale Sharks Kingston Park 5,859 Report
Trying to display in column B and C:
Bath Rugby Worcester Warriors
Harlequins London Irish
London Wasps Saracens
etc....
Because of the varying length of text each time,
i'm having problems doing this.
Tried =MID(A1,FIND(":",A1)+4,25)
but obviously get extra text other than team name.
View 9 Replies
View Related
Jun 21, 2014
I want to be able copy certain things from cells. Is there a way to make excel copy only the name from cells containing this (One name in each cell):
VESNINA E. (RUS)
PAVLYUCHEN. A. (RUS)
KERBER A. (GER)
I basically want to cut out the (...) in all names. I could do it manually, but there could be quite a few players.
View 3 Replies
View Related
Jun 25, 2009
I would like to have in a title cell "The Week of 8/24/09 - 8/28/09". I want to use something like this
View 2 Replies
View Related
Dec 18, 2008
I want to create a macro that will allow me to highlight a column and have the macro Trim every cell with text in the column, preferably putting the results over the original text. The column in question has text in every cell, until the column ends.
(That is, there are no numbers and no blanks until the data ends altogether.) I do not want to remove internal spaces in the text, just the leading and trailing ones.
I am sure this is fairly simple, but I'm not sure how to get it to look at every cell and then terminate properly.
View 8 Replies
View Related
Jan 13, 2010
I have this code that trims cells and I would like to implement in it a way to remove line returns in cells (new lines created with alt+enter).
Below is the code I used so far:
View 5 Replies
View Related
Feb 16, 2010
I have a small Excel VBA program that pulls data from our company database. I use this to collect information about orders that have been placed. The decriptions of our inventory within our accounting software usually go something like this: [
2/24] Small Red Rose
The [2/24] stands for 24 pieces per case and 2 pieces per inner pack.
My question is... can I trim off the text '[2/24]' within VBA?
I need to create quotes, labels and other things that use these descriptions and don't need to include the information with the brackets.
Obviously within VBA everything is done with variables, such as strDESC for the description.
View 7 Replies
View Related
Mar 9, 2009
I am trying to make a simple quiz on a spreadsheet which will provide the score immediately the player has finished. Basically a row is as follows:
C5= Question; D5 = player's input answer, E5 = check answer and give score
For example:
in C5 "What colour is a banana?"
The player inputs the answer to D5: yellow
in E5, the answer is tested by a formula and score is given. For this I have a formula IF(D5="yellow",1,0) hence E5 returns either 1 or 0.
Now my problem: If the player inputs one or more spaces, I need to use the TRIM function as well otherwise the answer will be incorrect. How can I work the TRIM with the IF formula?
A thought has just occurred to me that I might have to firstly Copy and TRIM the answer in to E5 and then have the IF condition in F5, but that needs another column and seems a longer way around.
View 2 Replies
View Related
Oct 17, 2009
Iam pulling hockey stats from yahoo sports into excel on one tab then i have other tabs as teams and iam pulling the stats from the yahoo sports tab to them
the yahoo tab is called Players but when yahoo bringis in the players names they come with a space in front of them. Now the formula iam using works if i go to the players tab and take the space out but as soon as I refresh the data it puts the space back.
here is what iam using
=IF(ISNUMBER(MATCH(TRIM($D5), Players!$A$1:$A$635,0)),INDEX(Players!NHL_2010_skaters, MATCH(TRIM($D5), Players!$A$1:$A$635,0), MATCH(E$4, Players!$A$1:$AT$1, 0)),0)
I think i have to put trim in by the players but when i try and add it I get formula errors.
View 4 Replies
View Related
Apr 30, 2012
I'm in need of a formula that would trim a name within a cell to look like this:
name in cell = Doe, John
Result looking for = DoeJoh
or
name in cell = Smith, Robert
Result looking for = SmiRob
The formula would take the first 3 letters of last name and combine them with the first 3 letters of the last name. There is a space after the , and the name would always be consistent with the exampel above.
Also what about a formula that would take a name like Doe, John and transpose it to John Doe.
View 2 Replies
View Related
Jan 30, 2008
I'm trying to clean up a very large spreadsheet that contains a tremendous amount of empty space.
I tried using the TRIM function to delete some of the additional space within each cell, but it only seems to allow you to update one cell/column at a time.
Is there a way to clean up the entire spreadsheet at once?
Find/Replace all spaces won't work because some cells have multiple words, and they need the space in between.
View 9 Replies
View Related
Mar 6, 2008
I would like to trim text based on the character .
For example i have a code FGH45679.A How do I keep only the characters before .A without the dot?
View 9 Replies
View Related
Nov 26, 2008
I am trying to record a macro, using the macro recorder, that will trim the contents of the cells in one column. The starting cell will always be E12 and the ending cell will vary depending on the number of records that month.
After I select cell E12, I hold down the shift key and hit end and then the down arrow to get my range. After that, I'm trying to use the Insert - Function from the menu to setup the trim but can't get it to work.
View 9 Replies
View Related
Aug 3, 2009
[data] ...
I am having problems removing "2009-642" from the above text string(s) (doesn't matter which)
This is just a sample line and it is not always in the same place so I am afraid a simple mid function from a set starting point will not suffice, the number is also dynamic in size, location and leading digits.
As a result I have created a formula to get rid of the "1 XS0444499197" part of the formula leaving me with " 2009-642 "
Now unfortunately I need to get rid of the spaces (or what look like spaces) just leaving me with the number but infuriatingly I can not get the trim function to work, so I can only guess that it is not in fact reading these spaces as spaces, and I'm at a bit of a loss how to proceed.
View 10 Replies
View Related
Aug 10, 2009
Any idea how you would remove all text strings that are red, I want to leave any text within the cells that are not red.
e.g
A1 contains
15245, 1535554, 17548789, erg, rtree, bf5256s
Would become
15245, erg, bf5256s
View 9 Replies
View Related
May 6, 2008
Need a formula/code that will determine what the corrected part number should be (insert dashes if they are missing) by comparing to other values in the list.
Original A1:A5 = {452, a-bc, 123, 4-52, abc}
Corrected C1:C5 = {4-52, a-bc, 123, 4-52, a-bc}
I can do this using an intermediate working column, but can this be done all in one formula, or via VBA?
My formulaic solution is thus: .....
View 5 Replies
View Related
May 1, 2014
I'm taking 3 very different reports and consolidating them into one manageable readable form. Only problem is that no 1 report has the same info. I've created a key to form pick up the same information that is read differently. As my spreadsheet grows so do the formula issues. I've had one report that has been the biggest pain to break apart. It takes several things and consolidates them, ex: big 2014 girl - dog 20145
I'm using a trim formula to read the last 5 digits that is the only consistent part of the string. =right(J3,5) to trim what i need to read (20145). this formula works. I'm than trying to preform a Vlookup based on what is returned from the trim. The trim number is located in a separate tab as the "key" 20145 = golden Labradors. formula for vlookup that works by itself, but throws up a blank cell when i point it to the trim cell.
=iferror(vlookup($A2,Info!A:ZZ,2,False)" ")
$A2 = the info 20145 from the trim
Info! = is the tab with my 20145 = golden Labradors
A:ZZ = the range in which i need it to find 20145
2 = the second column where it should find 20145 = golden Labradors
False = exact match.
Why my formulas work separately but not when used together? The Vlookup will work if I type in the number 20145. I don't want to type 20145 anymore. I want to use the trim and have the vlookup notice the number pulled from the trim.
View 2 Replies
View Related
Sep 11, 2013
I want to trim text into 10 characters.I am new to excel.
Attached is the sample sheet.
TRIM.xls
View 1 Replies
View Related
Jun 5, 2014
Need VBA code to trim the last four number from a cell and the result needs to be a date format
Example: ABCDEFG-0605
Result: 06/05
View 3 Replies
View Related
