Trying To Use SUMIFS To Sum A Column Based On Two Conditions
Jan 11, 2010
I would like to use a SUMIFS statement to sum up a column of numbers based on two conditions. The first condition is a word. I have this done. The second condition is going to be a two week date range, which I am having problems solving.
Here is my formula that works so far.
=SUMIF(Data!C:C,"Office",Data!D:D)
Now I would like to SUMIF a second condition is met. The second condition is a date and time in this format.
1/9/2010 9:21:49 AM
I am only concerned about the date. Time does not matter. I cannot figure out how to specify a date range for the second condition. I am trying to specify between 1/1/2010 and 1/14/2010 as a test. So here is what I have so far with a SUMIFS.
=SUMIFS(Data!D:D,Data!C:C,"Office",Data!A:A,"Cannot figure out how to specify dates")
Maybe my logic is wrong...maybe I need to do three conditions? Where column A has a date < 1/14/2010 and a condition that specifies a date > 1/1/2010.
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
I am trying to sum up cells from a column based on conditions in another column (see attached file). I know this could be done using a formula but for various reasons I want to use code. I am not sure if what I am doing is the right approach.
I have a report in which I need to delete the entire row for each cell in Column A that has the name "Defacto" in a certain location in that cell. I am trying to use VBA code in conjuction with the "MID" function [i.e., Mid(Cell.Value, 8, 7) = "Defacto"]. This is the code I came up with (but, obviously, it doesn't work):
Sub DeleteRowOnCondition() Range("A2").Select Range(ActiveCell, ActiveCell.End(xlDown)).Select For Each Cell In Selection If Mid(Cell.Value, 8 , 7) = "Defacto" Then Rows.Delete Next Cell End Sub
As well, there is another worksheet in the same report in which I need to delete all the rows that do NOT meet that condition (while retaining the ones that do).
I am trying to use the sumifs function to add a column that is in pounds but with multiple criteria.I am trying to add a price field but between two dates (between the beginning and end of each month) another criteria from a range of cells I have copied the formula I have written below
try to explain a little column K is the column I need to sum column B is the date field that I need to extract i.e. 1st to 31st January (I have put these dates in a cell that correspond to I17 and J17)
then the last bit column W is another criteria that I need met, this works for just one cell however if I try to add another criteria in another cell it doesn't work after M17 I add to the formula ,Sheet1!W:W,"="&M18)
I am trying to get a Sumifs to work where one condition is activated based on a cell value.
SUMIFS($E$2:$E$6,$A$2:$A$6,"=Region",$B$2:$B$6,"="&B1). I have a drop down in cell B1 that lists all the products.
I want the condition to be active only when I make a selection in the drop down, if I don't then I want the Sumifs to ignore the second condition and do a Sum on Region.
I am trying to work out a formula to return a sum based on 2 variable, but one of the variables in in a column and one in a row, anyway I can do this?
I don't want a normal sumif returning the relevant column as the relevant column will change based on a cell that can change.
I basically have a list of products sold (products listed down the page) by month (month listed across the page), I want to sum all the products in a particular month on a separate tab (both product and month can be changed).
I have used this technique before with a sumif formula, to use the column that matches a reference cell but I cannot get this to work on a sumifs formula. What I have used previously in a sumif formula (only 1 criteria) is below.
I have a SUMIFS function written that reads where some of my budget is coming from. I track several different departments but am only responsible for some of the departments' budgets. So i need to exclude two of the departments when the SUMIFS is reading the other parameters from my list.
From the example i attached, how would i go about writing the formula in I3 to skip the Cost if it comes from Dep 2 and Dep 4?
I have a list of about 2,500 entries containing information of all my works leave requests for 2009. This list contains more than one entry per employee, as it shows all their individual requests for different weeks. The list is compiled pulling through data from other worksheets. It looks like this...
Sheet Name: MASTER
Column A = Line Managers Surname Column B = Employees Surname Column C = Employees First Name Column D = Employees ID Number Column E = Week ending Column F to L = Days of the week Column M to O = Request Type Column P = Number of days requested for the week
I then have another sheet (Called REQUESTS) with all the employee names (1 entry for each employee), ID numbers and total requests for the year. This looks like this...
Column A = Line Managers Surname Column B = Employees Surname Column C = Employees First Name Column D = Employees ID Number Column P = Number of days requested for the year Column Q = Number of days requested for the summer
I know how to locate and add up all the requests for each individual for the whole year (Column P) from the MASTER sheet to the REQUESTS sheet by using the flowing formula for each employee.
=SUMIF(MASTER!$D:$D,D2,MASTER!$P:$P)
But I don't know how to ask Excel to find and add up all the total requests for only the summer period (Column Q). What I want Excel to do is this................
I want to have SUMIF and IF functions to be combined. i tried using the formula SUMIF( Timesheet!D2:D55,B2,Timesheet!F2:F55) but i want to edit the range everytime. Can i have formula like if name = Ant merce and prj = Implementation support, then the sum will be 15 for the sumrange of Timesheet!F:F (entire F column)
My challenge is pulling in a data element from a file to an exisiting file based on two criteria. Example: give me the value in cell e1 if cell b1 matches AND
File 1 A B C 1 H12377 03/05/2013 123 2 H12377 03/27/2013 276 3 H32389 05/03/2013 335
File 2 H12377 03/27/2013 _________
how do I get C2 value from file 1 (276) into file2 since column A is not unique but column A plus Column B is unique?
I have attached a file where there is information in the sheet Weekly with the first row showing the same month for several weeks. add a formula in the sheet Monthly which would calculate average for each month based on the first row in Weekly sheet. Plus the grouping in the Weekly sheet is done by shops and in the Monthly sheet by food, which would I imagine make the formula more complex.
I am wondering if I can do a formula that would tell me if the name that appears in column J or K appears more than once at the time/date slotted in columns A and B. Basically, I want to make sure that the name(s) in column J and K aren't assigned 2 different places at the same time slot (column B) on the same say (column A).
I am trying to sum numbers based on three counditions.
My problem the third condition needs to use a wild card. I have attached a sample file, in the last condition I am only wanting to sum numbers where the characters in the last column begins with bd*
I'm creating stockportfolio's based upon historical stock data. I have 300 stocks with monthly observations. Stocks are assigned to a portfolio based upon their return in the previous 6 months. I need the top 10% stocks in terms of return in previous 6 months (so 30 stocks) in one portfolio and the lowest 10% stocks in terms of returns in previous 6 months returns (so again 30 stocks) in another portfolio. Each portfolio is just a sum of the returns of the stocks that are in there.
First sheet: rows contain the return a stock had in the 6 months before the month in the left column (so january 2006 contains the return a stock would have had from july2005 -december 2005). This is done for 300 stocks. Second sheet: contains the return the stock had in that actual month (so january 2006 just contains the january 2006 return) The third sheet is where I want to create the decile portfolio's. This means that for every month i am creating 10 portfolio's: Each month "portfolio 1" should contain the sum of the returns of the stocks with the 30 highest returns in the past 6 months. "Portfolio 10" should contain the sum of the returns of the stocks with the 30 lowest pas 6 month returns. (30 is 10% of 300: that's why it is called decile portfolio)
So I should sum things from sheet 2 with the condition referring to sheet 1 where the returns of the past 6 months are displayed. I am trying formula's like =SUMIF(RANK...) but am getting no results. Somehow excel should select the right stocks and sum the 30 returns. I'm totally lost after a lot of trials.
I am doing a financial analysis for a hospital. I want to know how to add something to a number based on conditions. Base pay is $300 for the first 10 patients. If more then ten patients >11-20 add 40 dollars per visit if greater than >21 add 50 dollars per patient
New to the forum and in need of a bit of help. Friend of mine is in here regularly looking for assistance and tells me this is the best excel forum around. Thought I would put it to the test with a problem that is doing my head in.
The following is a table which shows a salesmans sales. He or she has sold to 8 customers.
What I need to do is show in the commission column how much they should get paid for the additional products based on this criteria.
1. If the penetration is equal to or over 41%, and he has sold the additional product for max profit of 250 then he should get £40
2. If the penetration is less than 41%, and he has sold the additional product for max profit of 250 then he should get £25
3. If he hasnt sold the product for full amount then he gets 10% of the profit, regardless of the penetration ...
I know that there are bunches of threads concerning lookups with multiple criteria, but I just can't figure out how to translate one to my situation. I want to return a value based on an item name which is in column A, and an operation which is in row 1.
The array from which I need to look up the value contains part number in column B, operation in column G, and the actual value I need returned in column H.
The issue is that I need where {"One","Two","Three"} is to contain between 3 and 334 conditions.
Basically we have a data table that contains "channels" that have multiple affiliates under it. Then we have a data table by affiliate by country and revenue... I want revenue by Country By Channel...
I have this vb script which basically states if a value in column G is less than 0 then show a message box as below.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count 1 Then Exit Sub If Not Intersect(Target, Range("G3:G371")) Is Nothing Then If Target.Value < 0 Then MsgBox "You have entered a negative figure - are you sure this is correct?" End If End If End Sub
What I would like to do is extend this script so that another message box pops up based on two conditions
i.e. if a cell in column F shows string "accounts use only" AND value in the adjacent cell in column G is > 0 then MsgBox "you have entered a positive figure - are you sure this is correct?"
I'm trying to adjust my macro to fill the interior cell color of a row if there's a non-blank row above and below it (i.e. if there are 3 or more non-blank rows together, then fill the 2nd, 4th, etc. rows. If there are only 1 or 2 rows together, then don't fill the cells.
However, what I'm getting is filling ever other row, with this code. There seems to be an error in how I'm trying to use and If condition with 3 criteria.
Code: Sub colorin()
Dim LastCol As Long Dim r As Integer r = 6 With ActiveSheet LastCol = .Cells(5, .Columns.Count).End(xlToLeft).Column
[Code] ....
Here are some sample results (pretend cells with red text are actually cells with interior color, black text is an unfilled cell).
Rank Name
1 Jones, Some
[Code] ......
What I'm trying to achieve is: (again, red text actually represents filled cells - can't get sample shot of actual filled cells to copy into forum post).
I have a workbook with 2 worksheets. The first sheet provides a summary showing the last date a person attended a specific course.
The second worksheet is a list of all courses, attendees, dates, and status. I need a function that will match the attendee and course from the Master and display the date from the master in the corresponding cell on the summary sheet....
In the sample that I have attached. I am trying to compare Control ID and Business Date in Sheet[Test] and Sheet[Perform], If they are the same, then populate in Sheet[Perform] Column Test Status with the corresponding row in Sheet[Test]. note that Control ID and Business Dates are not constants.
I have a table(see attached). I want to sum the total hours worked in Col C. Col B has the number of people on the job (either 1 or 2). I need a condition, I guess , so that if Col b has a number 2 in it, then the adjacent cell needs to be multiplied by 2, then summed into the total hours worked.
I am not sure on how i would write a formula for this. Looking at the sample if I add the total hours from col C at the moment I get a total of 18 Hours but as cell C3 & C5 have a "2" in their adjacent column, the total hours answer should be 27 hours.
I created a master data sheet to enter data manually to analyze. It contains 20 columns, and rows(continue change, because we enter data all of the days). I need to extract data to another sheet, when the user enters data in the master data sheet, but with some conditions, when the column 6 contain the word ASQ, and then extract all of the data, but the new sheet do not contain 20 columns, because the data that contains the word ASQ have only 16 columns.
