Update PowerPoint Automatically When SpreadSheet Is Changed

Apr 10, 2014

I'm trying to code so that any changes made to Excel document will automatically change in PowerPoint. I have Copied and Pasted Special link so that its connected but when ever a change is made in Excel in powerpoint I get a pop up box saying I need to press update. But I want to bypass the pop up update box and have it so that powerpoint automatically updates when I change something in Excel.

This is the code I have so far. I don't know if it's right or if I am on the right track as I get a compile error saying I need a End with.

[Code] .....

View 4 Replies


ADVERTISEMENT

Formula: Spreadsheet To Automatically Update The Latest Results

Apr 3, 2009

I've adapted a spreadsheet to automatically update the latest results.

But my formula (D11), that I got from here, has now stopped working.

I suspect this is due to the formula I've used columns H and I. But I have no solution.

Also the very similar formula used in M15 to M44 has also stopped working, probably for the same reason.

View 3 Replies View Related

Copying Cell Contents From Another Spreadsheet That Automatically Update

Apr 26, 2013

I am working on a manpower spreadsheet and need for one spreadsheet to extract data from another and automatically update if it is changed and I am struggling below is an example of what is on spreadsheet 1:

Mentor.jpg

and the information from spreadsheet 1 is copied to spreadsheet 2, however if amendments are made to spreadsheet 1 they are automatically updated on spreadsheet 2:

Spreadsheet 2:

C0-ord.jpg

View 1 Replies View Related

Auto Update Links From Excel To Powerpoint

Oct 25, 2012

I have excel graphs linked to a power point presentation that runs in a loop and I would like have to the links update everytime slide 1 pops up or when the loop restarts, either one works for me. When I close the looping presentation and reopen it I get a message asking me if I want to update the charts, but I would really prefer the looping presentation to update itself. I know this is going to be a VBA setup, but I cant seem to figure it out. I pasted the links by: pasting special, paste link as microsoft office excel worksheet object.

View 8 Replies View Related

Table To Update When A Category Is Changed

Feb 21, 2009

I am wanting this work book to do is have a table of categories update automatically when a category is selected in the "category column". The 3rd cell to the left of the category column "Gross column" is where the data is which needs to be sent to the corresponding category in the table and utomatically update. I have attached a sample workbook.

View 4 Replies View Related

How To Set Label Caption To Update Once Textbox Value Is Changed

Feb 26, 2013

I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?

View 2 Replies View Related

Pivot Tables: Auto-update 1 When Other Is Changed

May 12, 2006

I have 3 pivot tables on the same page - they all have the same PAGE and ROW fields, just different column and data fields. (may seem weird, but I'm producing reports for non-Excel people and this seems the only way to display info in user-friendly way).

Problem: If a user changes the selection in a Page field, I need the other 2 pivot tables to automatically select the same Page field, so the pivot tables are still all like-for-like.

I've started writing a macro which I can run to do this - below - but

1) I need it to run automatically when any of the page or row fields are updated

2) my macro is probably far too basic for my needs - one of the page fields has 245 values, so the below isn't really going to cut it!...

View 4 Replies View Related

Dates In Spreadsheet Changed

Mar 23, 2007

the dates in my spreadsheet changed from dd-mm-yyyy to a random 5 digit number. For instance, if I enter in 01-07-2007, it will re format to to 39089. I am trying to fix it, but I can't seem to figure out what happened and how to get all of the dates back to normal. Is there a way to fix this?

View 9 Replies View Related

Excel 2010 :: How To Auto Update PowerPoint Table When New Data Entered Into Table

Jun 12, 2013

I have created a table in Excel 2010 (pls see attached table named post.xlsx).

Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).

Question:

I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.

Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".

Specific Question:

The newly-typed column in Excel table is not get updated in PowerPoint table.

View 2 Replies View Related

Automatically Update Only With Numbers (ifnumber-update And Go To Next Cell)

Oct 18, 2013

Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:

A B
Yes 12
12 13
No 10
13
No
10
Yes

And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15

So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.

View 13 Replies View Related

Automatically Run Udf When Color Is Changed

May 2, 2007

I have a UDF that goes like this:

Function SumIfPurple(inputRange As Range, _
answerRange1 As Range, _
answerRange2 As Range) As Variant
Dim SumAnswer As Variant

'If inputRange is turned purple then it is equal to anserRange1, if it is left with no fill it is equal to answerrange2.

If inputRange.Interior.ColorIndex = 39 Then
SumAnswer = answerRange1.Value
Else
SumAnswer = answerRange2.Value
End If
SumIfPurple = SumAnswer
End Function

I would like to have a sub that will have the formula automatically calculate when the inputRange's color is changed.

View 6 Replies View Related

Run Macro Automatically Once 3 Cells Have Changed

May 21, 2008

how to alter this Private Sub for my code to execute automatically once all 3 cells have changed. At the moment it executes as soon as any of the 3 cells change.

Here's the Private and Public Sub codes:

View 9 Replies View Related

Automatically Calculate Cell When Changed

Oct 24, 2006

There is a column in my spreadsheet which needs to reflect a " percent done".
I used to enter just a numerical value in (eg. 20) to reflect 20% done. My boss wanted it to show as an actual percentage (eg. 20%). I changed the format to Percent, Zero decimal places. Then you had to enter .20 to get the 20% to show.
Now my boss doesn't like that - and wants to be able to enter "20" to get the 20% to show. I put the following code in my SelectionChange event...

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'other logic
If Target.Column = Asc(PercentDoneColumn) - 64 Then
If Target.Value <> "" Then
Target.Value = Target.Value / 100
End If
End If
'end other logic
End Sub

My problem is that this works well when putting a new percentage in, but not for when you click on a cell that already has a percentage in it. For example, if you have .2 (displaying "20%" in the cell), and click on that cell, it divides that number by 100, and gives you 0.2%, displaying as "0%". I want to enter a number between 0 and 100, have it displayed and stored as a percent. At this point, I'd settle for the displayed, but would prefer to have it stored as a percent, too.
I also want it to not reset my value unless I'm putting a new value in!

View 4 Replies View Related

Automatically Calculate 2 Cells Based On Cell Changed

Apr 25, 2009

I have some rather complex formulas that when a value is placed in one of any three cells it solves for the other two, taking values from other places on a worksheet (including the cell itself).

Scenario: Cell F10, G10, and H10 all have formulas in them. If a value is placed in F10 it solves for G10 and H10. If a value is place in G10 it solves for F10 and H10. If a value is placed in H10, it solves for F10 and G10.

I really do not think the actual formulas matters at this time...

Has anyone done this before, using VBA code to place the formulas in cells F10 G10 and H10? Look for a working example of this if possible.

View 9 Replies View Related

Autofill; Copy Down It Doesn’t Automatically Update The Cell References Because It Want To Update Them By Column Number Instead Of Row Number

Dec 11, 2008

I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?

View 5 Replies View Related

Excel 2013 :: All Sheets Being Automatically Changed To Currency Format

Dec 2, 2013

We have 3 PCs, all running MS Office 2013. On 1 of these machines, it is doing strange things with formatting. If you open a document or try to paste anything into certain documents, it decides everything is currency format and assigns all sorts of wrong formatting to the entire sheet, or the entire document. There may be some cells in the doc that are indeed currency, but only a small proprtion. If I open a new, fresh document and paste into that document, it does not do this, it seems to work normally, only applying currency formatting where it might be applicable. On some larger docs that have this issue, no matter what I do, it just continues to apply these strange settings.

View 2 Replies View Related

Automatically Save My Workbook When A Certian Cell Range Is Changed

Jul 21, 2009

I am very new to vba and trying to figure out an auto save macro that will automatically save my workbook when a certian cell range is changed. Right now I have a macro set that automactially record the time and date of when a change is made to the name cell, I want to set up a macro that will automatically save the file when the time is updated.

This program is used by several users and they have a tendnecy to forget to save the program so that when other people want to check the updated data nothing has changed because the changes have not been saved. I have attached the file that I am working on. When a change is made in column F then Column G automatically updates, now I want column G to trigger autosave. I would also like a msgbox to appear to tell user that file has been saved.

View 3 Replies View Related

Automatically Add Username, Current Date And Time Each Tiime Any Cell Is Changed

Feb 27, 2009

I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:

Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub

See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.

View 3 Replies View Related

Automatically Call Macro Based On Changed Cell Address & Text

Apr 13, 2009

I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.


Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"

CustomColorInput 1-6 are the same except they input data into different cells F16-F21.

When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.

Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function

When I close VBA, the data that I typed into the data input box is in the correct cell.

So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?

More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?

View 9 Replies View Related

Automatically Updating Adjacent Cells Based On Dropdown List Selection Even If Changed

Apr 12, 2013

I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.

View 1 Replies View Related

Update Data By Ado - Change/delete Data And Then Run Macro For Update Data In Source Spreadsheet

Dec 6, 2006

I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.

Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub

It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used

.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0

after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).

View 2 Replies View Related

Update One Excel Spreadsheet From Another

Jul 18, 2012

Here is the scenario:

I have a primary excel spreadsheet that I work from. The architecture is as follows:

Sheet 1: Called "Information"
Column A: Name
Column B: Date of Birth
Column C through Z: Various bits of information.

Sheet 2: Called "Master"
Cell B1: Contains the date and time of last update from the VBA I am asking for below.

On a weekly basis I get sent a "Update" spreadsheet that is constructed the same way as my primary. This is what I would like to do with some VBA:

From my primary sheet I run the VBA and it opens a pop up that allows me to select the updated worksheet. Next it cycles through both worksheets (Primary and Update). It compares Column A and B, if it finds a match it updates columns C through Z from the "Update". In order to get a match cell A1 and B1 of the primary worksheet has to match Cell A1 and B1 of the update sheet exactly.

The second thing I would like it to do is if the update sheet contains a new entry...in other words the update sheet has a row that does not match the primary it copies the row from the Update sheet to the Primary. In this way, the Primary sheet is always growing with new information and updating any old information it matches.

The last thing I would like to do is copy the current date and time after the comparison is complete to the Primary workbook to sheet "Master" in cell B1. This way I always know the time and date of the latest update.

View 1 Replies View Related

Update Spreadsheet By 1 Year

Jul 10, 2009

I have a spreadsheet for Jan-Dec 2008 containing entries for each day as seen below.

Mon07-Jan-08
Tue08-Jan-08
Wed09-Jan-08
Thu10-Jan-08
Fri11-Jan-08
Sat12-Jan-08
Sun13-Jan-08
Mon14-Jan-08
Tue15-Jan-08
Wed16-Jan-08
Thu17-Jan-08

I would rather not have to update each date manually so could any of you kindly inform me of a command whereby all of the 2008 dates can be updated to 2009?

View 11 Replies View Related

Automatic Update Of Data In Other Spreadsheet

Apr 24, 2009

I want to automatically update data from one spreadsheet to ther one i am novice to vb programming


here are two file plzzz help me out --sheet 1--sheet(data of sheet one to be copied into)
and is there any way that the data copied also gets saved the in that spreadsheet as next time data in sheet 1 is updated!

View 10 Replies View Related

Auto Update Calendar With Spreadsheet?

Sep 17, 2013

I am trying to do exactly what the calendar from this thread does with the Waste Log: [URL]....

But the years only go to 2012, can someone update this for 2013? And include Saturday and Sunday on the calendar too?

View 2 Replies View Related

Spreadsheet That Update From The Data Warehouse

May 28, 2008

I have a spreadsheet that update from the data warehouse (I do this manually daily) there is always new sports being added

When I update I would like a macro to check for new sports and if there is one then msgbox me and add it to my table on the next sheet that I use for lookups.

View 9 Replies View Related

Worksheet Update For Holiday Spreadsheet

Feb 17, 2006

I need to have all the information in one workbook for all 100 employees and still provide an individual report for each user and an overall report. In the attachment is a "Summary" and "Calendar" sheet these are the original individual files. summary contains personal information and the "calendar" tracks absence and holiday and the totals returned to the Summary sheet. I think what I need is a Master worksheet that has all the information in for each employee pre row and to have a "calendar" input/change/ call worksheet sheet to call an individual detail, this would also update the master worksheet with any changes.

View 4 Replies View Related

Update Spreadsheet With Textboxes Content

Sep 6, 2007

I have about 5 text boxes. The user enters data in each text box and, as of right now, the data automatically gets saved as I am using the _change event. (TextBox1_Change()) This stores the value of each text box into a cell of my choosing on an Excel spreadsheet automatically.

From what I gather (according to a great ozgrid administrator ), it would be better, as a coder, to not use the _Exit event and instead, perhaps I should use the _Enter event. (TextBox1_Enter.) This way, when the user fills out the information in the text boxes, the information will NOT be loaded onto an Excel spreadsheet automatically as they type. (Which is what it does now by using the following code for each text box

Private Sub TextBox1_Change()
Sheets("Sheet1").Range("A" & intRow.) = TextBox1.Value........

View 9 Replies View Related

Pivot Table Fields Expands Automatically When Updating Data (only Where Data Has Been Changed)

Jan 11, 2013

I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?

It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.

View 1 Replies View Related

Make Userform That Will Update List In Spreadsheet?

Dec 8, 2012

I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:

5
10
15
20

then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved