I have a spreadsheet that update from the data warehouse (I do this manually daily) there is always new sports being added
When I update I would like a macro to check for new sports and if there is one then msgbox me and add it to my table on the next sheet that I use for lookups.
I have a 1046 line spreadsheet that I need to enter 8 additional lines after each current line. I would like to do this for the entire spreadsheet at one time. I also need to lable each of the 8 lines from the name of the org. line. For example, the org. line product name is 1234 and I need to lable the 8 additional lines under that product 1234-A, 1234-B, 1234-C, etc..
View 9 Replies View RelatedI have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I want to automatically update data from one spreadsheet to ther one i am novice to vb programming
here are two file plzzz help me out --sheet 1--sheet(data of sheet one to be copied into)
and is there any way that the data copied also gets saved the in that spreadsheet as next time data in sheet 1 is updated!
Here is the scenario:
I have a primary excel spreadsheet that I work from. The architecture is as follows:
Sheet 1: Called "Information"
Column A: Name
Column B: Date of Birth
Column C through Z: Various bits of information.
Sheet 2: Called "Master"
Cell B1: Contains the date and time of last update from the VBA I am asking for below.
On a weekly basis I get sent a "Update" spreadsheet that is constructed the same way as my primary. This is what I would like to do with some VBA:
From my primary sheet I run the VBA and it opens a pop up that allows me to select the updated worksheet. Next it cycles through both worksheets (Primary and Update). It compares Column A and B, if it finds a match it updates columns C through Z from the "Update". In order to get a match cell A1 and B1 of the primary worksheet has to match Cell A1 and B1 of the update sheet exactly.
The second thing I would like it to do is if the update sheet contains a new entry...in other words the update sheet has a row that does not match the primary it copies the row from the Update sheet to the Primary. In this way, the Primary sheet is always growing with new information and updating any old information it matches.
The last thing I would like to do is copy the current date and time after the comparison is complete to the Primary workbook to sheet "Master" in cell B1. This way I always know the time and date of the latest update.
I have a spreadsheet for Jan-Dec 2008 containing entries for each day as seen below.
Mon07-Jan-08
Tue08-Jan-08
Wed09-Jan-08
Thu10-Jan-08
Fri11-Jan-08
Sat12-Jan-08
Sun13-Jan-08
Mon14-Jan-08
Tue15-Jan-08
Wed16-Jan-08
Thu17-Jan-08
I would rather not have to update each date manually so could any of you kindly inform me of a command whereby all of the 2008 dates can be updated to 2009?
I am trying to do exactly what the calendar from this thread does with the Waste Log: [URL]....
But the years only go to 2012, can someone update this for 2013? And include Saturday and Sunday on the calendar too?
I need to have all the information in one workbook for all 100 employees and still provide an individual report for each user and an overall report. In the attachment is a "Summary" and "Calendar" sheet these are the original individual files. summary contains personal information and the "calendar" tracks absence and holiday and the totals returned to the Summary sheet. I think what I need is a Master worksheet that has all the information in for each employee pre row and to have a "calendar" input/change/ call worksheet sheet to call an individual detail, this would also update the master worksheet with any changes.
View 4 Replies View RelatedI have about 5 text boxes. The user enters data in each text box and, as of right now, the data automatically gets saved as I am using the _change event. (TextBox1_Change()) This stores the value of each text box into a cell of my choosing on an Excel spreadsheet automatically.
From what I gather (according to a great ozgrid administrator ), it would be better, as a coder, to not use the _Exit event and instead, perhaps I should use the _Enter event. (TextBox1_Enter.) This way, when the user fills out the information in the text boxes, the information will NOT be loaded onto an Excel spreadsheet automatically as they type. (Which is what it does now by using the following code for each text box
Private Sub TextBox1_Change()
Sheets("Sheet1").Range("A" & intRow.) = TextBox1.Value........
So i have many different list of items that i have supplied, pretty much shopping lists. I am now trying to create an inventory of my warehouse and i would like to see what i should buy more of and less of. is there a certain table or template or something i can plug in all my lists and have excel break down all the data and tell me whats what on all my info. i have about 45 different lists and each list has an average of about 150 line items.
View 1 Replies View RelatedI'm trying to code so that any changes made to Excel document will automatically change in PowerPoint. I have Copied and Pasted Special link so that its connected but when ever a change is made in Excel in powerpoint I get a pop up box saying I need to press update. But I want to bypass the pop up update box and have it so that powerpoint automatically updates when I change something in Excel.
This is the code I have so far. I don't know if it's right or if I am on the right track as I get a compile error saying I need a End with.
[Code] .....
I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5
10
15
20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
I was wondering if there was a way that I can have a user only able to edit the worksheet that pertained to them in a workbook of many sheets. So if there was a sheet called "Alicia" and another one called "Love Child"; user Alicia would only be able to update info on the "Alicia" tab and user Love Child would only be able to update their info. Is this possible? Also can this be done for a particular row in a spreadsheet? So if row 3 has Alicia's info, she's only allowed to update the info on that row.
View 3 Replies View RelatedI am trying to create a worksheet that tracks the age o f the inventory in my warehouse. I am charged each week at an increasing rate and want to be able to track what these charges will be. I would like to be able to sum up the data below in a pivot table that shows how many units are falling into each age group, this would add up to a max o f 10 weeks o f increasing charges.
3/1/14 received 1000 units
3/6/14 ship 600 units
3/8/14 charge for 1 week at 400 units
3/8/14 receive 500 units (900 pieces on units)
3/13/14 ship 300 units
3/15/14 charged for 100 units at 2 weeks and 500 units at 1 week
This needs to be able to assume this is going on for 10 different items, I would like to be able to track the items independently and in bulk.
I am trying (and failing miserably) to create a fomula to 'score' my pickers in a warehouse environment.
The basic variables are;
1) Units (Total quantity of units on picklist)
2) Lines (Number of different products on picklist)
3) Time (Total time to complete pick)
To give an example, if Units = 8, Lines = 1 and Time = 00:01, I want 'Score' to = 100.
(Based on benchmark, rounded down to lowest common denominators)
The added complication I face is the relationship between Lines and Units; it would take someone longer to pick 1 unit from 10 lines than 10 units from 1 line.
I've got these inventory numbers that I've been working with.
Last years Usage and this years usage combined per warehouse for each item.
Plus another sheet that has On-Hand counts per warehouse for each item.
What I'm trying to do is pull my usage count per item per warehouse and place it all on different sheets so that I can compare numbers and do a few different things.
On my data sheet I have the warehouse number, in my example, "TOT.", 0100, and 0101. In the next column is the item # and on the end is the total used for that item by that warehouse.
On my the individual warehouse sheets I have the warehouse number, and the item # and some other things.
What I need is someone to look for the warehouse name "TOT.", 0100, or 0101 and then find the Item # and get the total used from the total column. If it wasn't used or does exist then I need 0 to appear.
I've adapted a spreadsheet to automatically update the latest results.
But my formula (D11), that I got from here, has now stopped working.
I suspect this is due to the formula I've used columns H and I. But I have no solution.
Also the very similar formula used in M15 to M44 has also stopped working, probably for the same reason.
I am working on a manpower spreadsheet and need for one spreadsheet to extract data from another and automatically update if it is changed and I am struggling below is an example of what is on spreadsheet 1:
Mentor.jpg
and the information from spreadsheet 1 is copied to spreadsheet 2, however if amendments are made to spreadsheet 1 they are automatically updated on spreadsheet 2:
Spreadsheet 2:
C0-ord.jpg
I want to make my VBA cell reference update when I update my spreadsheet by adding or deleting columns or rows. Is there a way to do this?
View 9 Replies View RelatedI have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI have a workbook with a database of 15 different products. We receive information with current prices for each of the 15 products on a weekly basis. This info comes in one single worksheet. I have created a different file with one worksheet for each product to track price behavior over time. I need to update these database everytime I get a new report. What I was trying to do is to develop a Macro to copy the data from a "Master" worksheet that includes all 15 products info to the respective worksheet for each product. Information is sorted in columns having the most recent date in the lowest column. I would need the Macro to copy the new data below the last price for each product. I would copy the data into the "MAster" worksheet, then run the Macro who would copy each row and paste it in its respective worksheet in the row rightafter the previous one.
View 4 Replies View Related