I have a spreadsheet for Jan-Dec 2008 containing entries for each day as seen below.
Mon07-Jan-08
Tue08-Jan-08
Wed09-Jan-08
Thu10-Jan-08
Fri11-Jan-08
Sat12-Jan-08
Sun13-Jan-08
Mon14-Jan-08
Tue15-Jan-08
Wed16-Jan-08
Thu17-Jan-08
I would rather not have to update each date manually so could any of you kindly inform me of a command whereby all of the 2008 dates can be updated to 2009?
I want just the year to update because I look for information in other cells depending on the year. Also look for data based on just the month.
View 10 Replies View RelatedI'm trying to put in dates into my spreadsheet depending on the year I enter in. in cell A1, I put in the year (2007). In cell S2, I want to have the first day of the first month to show up, so my formula is =DATE($A$1,COLUMN()-18,1). That works great, it shows up as 1/1/07, which I want. Now my question is, is there a way to copy the formula over to the right, leaving three blank cells and having 2/1/07 show up in cell W2, 3/1/07 in cell AA2, and so on. Right now when I copy it over, what shows up is: 5/1/07 in cell W2, 9/1/07 in cell AA2, and so on.
View 9 Replies View RelatedI have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I have an Excel spreadsheet containing a large amount of formulas applicable to 2009. I want to create a duplicate workbook for 2010. I want to maintain all cell formatting, ie A1=sum(whatever) without retyping it all. When I attempt to use copy-and-paste (or paste special) from 2009 to 2010, the cell values maintain a reference to the 2009 workbook. For example on 2010 workbook, A1=[2009]sum(whatever). Therefore the values from 2009 print in cells. I only want to maintain cell formula formatting, not a reference back to 2009 workbook.
View 5 Replies View RelatedI am trying to show the date in a spreadsheet as the month and the year.
The date is in B2 30/04/2012 and i want it to show in C2 as Month/Year.
I am currently using =month(B2) which shows it as a no ( 4 ). Can i make it show as month / year?
I have uploaded a sample amortization schedule.
1. I require the table to adjust itself based on the loan period and number of payments per year entered in D14 and D15 respectively.
2. Also, if a value is entered in column E, then i require the whole table to update as well.
Here is the scenario:
I have a primary excel spreadsheet that I work from. The architecture is as follows:
Sheet 1: Called "Information"
Column A: Name
Column B: Date of Birth
Column C through Z: Various bits of information.
Sheet 2: Called "Master"
Cell B1: Contains the date and time of last update from the VBA I am asking for below.
On a weekly basis I get sent a "Update" spreadsheet that is constructed the same way as my primary. This is what I would like to do with some VBA:
From my primary sheet I run the VBA and it opens a pop up that allows me to select the updated worksheet. Next it cycles through both worksheets (Primary and Update). It compares Column A and B, if it finds a match it updates columns C through Z from the "Update". In order to get a match cell A1 and B1 of the primary worksheet has to match Cell A1 and B1 of the update sheet exactly.
The second thing I would like it to do is if the update sheet contains a new entry...in other words the update sheet has a row that does not match the primary it copies the row from the Update sheet to the Primary. In this way, the Primary sheet is always growing with new information and updating any old information it matches.
The last thing I would like to do is copy the current date and time after the comparison is complete to the Primary workbook to sheet "Master" in cell B1. This way I always know the time and date of the latest update.
I want to automatically update data from one spreadsheet to ther one i am novice to vb programming
here are two file plzzz help me out --sheet 1--sheet(data of sheet one to be copied into)
and is there any way that the data copied also gets saved the in that spreadsheet as next time data in sheet 1 is updated!
I am trying to do exactly what the calendar from this thread does with the Waste Log: [URL]....
But the years only go to 2012, can someone update this for 2013? And include Saturday and Sunday on the calendar too?
I have a spreadsheet that update from the data warehouse (I do this manually daily) there is always new sports being added
When I update I would like a macro to check for new sports and if there is one then msgbox me and add it to my table on the next sheet that I use for lookups.
I need to have all the information in one workbook for all 100 employees and still provide an individual report for each user and an overall report. In the attachment is a "Summary" and "Calendar" sheet these are the original individual files. summary contains personal information and the "calendar" tracks absence and holiday and the totals returned to the Summary sheet. I think what I need is a Master worksheet that has all the information in for each employee pre row and to have a "calendar" input/change/ call worksheet sheet to call an individual detail, this would also update the master worksheet with any changes.
View 4 Replies View RelatedI have about 5 text boxes. The user enters data in each text box and, as of right now, the data automatically gets saved as I am using the _change event. (TextBox1_Change()) This stores the value of each text box into a cell of my choosing on an Excel spreadsheet automatically.
From what I gather (according to a great ozgrid administrator ), it would be better, as a coder, to not use the _Exit event and instead, perhaps I should use the _Enter event. (TextBox1_Enter.) This way, when the user fills out the information in the text boxes, the information will NOT be loaded onto an Excel spreadsheet automatically as they type. (Which is what it does now by using the following code for each text box
Private Sub TextBox1_Change()
Sheets("Sheet1").Range("A" & intRow.) = TextBox1.Value........
I'm trying to produce a spreadsheet for tracking pupil's progress through a year at school (Targets/Predictions etc) but am having some problems with creating a summary of data gathered for each pupil. I have attached the file for your perusal; On the data entry sheet staff will fill in the appropriate data, and on the summary sheet I am looking to generate summaries for each pupil (I have set up how I want it to look). This may sound easy, (and probably is); the issue is that there are around 30 subjects in total, but pupils will only have be doing 5 of them, I need the summary sheet to show the information for subjects they are taking only (It should come up with the subject name under the headings subject1/2 etc and the appropriate grades to go with them, missing the blanks out. Obviously I could do this by cutting and pasting for each pupil...But there will be almost 2000 pupils in the list!!!
View 4 Replies View RelatedI'm trying to code so that any changes made to Excel document will automatically change in PowerPoint. I have Copied and Pasted Special link so that its connected but when ever a change is made in Excel in powerpoint I get a pop up box saying I need to press update. But I want to bypass the pop up update box and have it so that powerpoint automatically updates when I change something in Excel.
This is the code I have so far. I don't know if it's right or if I am on the right track as I get a compile error saying I need a End with.
[Code] .....
I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5
10
15
20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
I was wondering if there was a way that I can have a user only able to edit the worksheet that pertained to them in a workbook of many sheets. So if there was a sheet called "Alicia" and another one called "Love Child"; user Alicia would only be able to update info on the "Alicia" tab and user Love Child would only be able to update their info. Is this possible? Also can this be done for a particular row in a spreadsheet? So if row 3 has Alicia's info, she's only allowed to update the info on that row.
View 3 Replies View RelatedI've adapted a spreadsheet to automatically update the latest results.
But my formula (D11), that I got from here, has now stopped working.
I suspect this is due to the formula I've used columns H and I. But I have no solution.
Also the very similar formula used in M15 to M44 has also stopped working, probably for the same reason.
I am working on a manpower spreadsheet and need for one spreadsheet to extract data from another and automatically update if it is changed and I am struggling below is an example of what is on spreadsheet 1:
Mentor.jpg
and the information from spreadsheet 1 is copied to spreadsheet 2, however if amendments are made to spreadsheet 1 they are automatically updated on spreadsheet 2:
Spreadsheet 2:
C0-ord.jpg
I want to make my VBA cell reference update when I update my spreadsheet by adding or deleting columns or rows. Is there a way to do this?
View 9 Replies View RelatedI have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
Looking for a formula to compare current year values to previous year values. For example, if the current year has values for the month of January through March (100, 100 and 150), current year value will be 350 and the previous year value will be 975 (i.e. 300+275+400). The aim here is to make the previous year months summation equal to the present (or current) values. As new values are entered for the current year, the previous year's values will have to change to reflect the new month's value entered for the current year.
Month 2012 2013
Jan 300 100
Feb 275 100
Mar 400 150
April 650
May 454
June 800
July 500
Aug 375
Sep 525
Oct. 300
Nov 410
Dec 510
Sample file is attached : Comparison_Years.2011.xls‎
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedI am trying to do an IF statement, if the activecell's value is equal to this current year, do nothing and if its not the current year, to offset one column to the right and insert a blank column, then copy the whole column to the left and replace it with the new blank column.
View 1 Replies View Relatedi have the following table of information
Year DOB
7 01.09.96 -31.08.97
8 01.09.95 -31.08.96
9 01.09.94 -31.08.95
10 01.09.93 -31.08.94
11 01.09.92 -31.08.93
and a list of dates i need to look up the date to see which year it falls in and return the year
DATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
I know that in order to draw a chart where a data line for a certain period is compared with the same period the previous year, one should have the 2 sets of data of different year side by side columnwise. However, is there a way where I could still churn out the same line chart when the data is all on a single column?
View 9 Replies View Related1. I need to convert a year into a decimal year ie. 1830 into decimal year (I don't have a month, just year)
2 Year/month into decimal year/month
I just not sure what to do, is the year stored as a number/text/date. What should it even look like? Does 1830 display as 1830.00 using excel.
I'd like to know a formula which can calculate the moving annual total, that is the sum of the last 4 quarters. Now every time the sales from a quarter is known, i have to recalculate the MAT mannually.
View 2 Replies View Related