I am writing code that when you click "OK" on the userform the macro should copy the user entered values which are already in a worksheet into another worksheet. Once the values have been copied over I would like the form to clear the values.
The code that I have so far is giving me a Method " Range" of object'_Global' failed error.
Sub UpdateVariables()
Dim HomeAddress
Dim CellAddress
Sheets("UserInput").Select
If Range("E1") = 0 Then Exit Sub
For Each Cell In Range ("E4:E496")
Cell.Activate
If ActiveCell.Value = 1 Then
HomeAddress = ActiveCell.Address
CellAddress = Variables & "!" & ActiveCell.Offset(0,1).Value
Range(CellAddress).Value = ActiveCell.Offset(0,-1).Value
Range(HomeAddress).Select
End If
Next Cell
End Sub
The following code edits/adds the value of textbox2 to its corresponding cell. The problem with it is that after updating, the values are unrecognizable and can't be used for further calculations.
Code: With LB LI = .ListIndex Range(.ListFillRange).Cells(LI + 1, 2).Value = TextBox2.Value
[Code]...
Although it does not gives an error it makes even more values in the column unrecognizable.
I'm working on a workbook to track staffing patterns. I have two userforms included in my workbook. The first userform (userForm2) initiates upon opening the workbook. It's intended to allow the user to enter a date range and an office location for the report. The second userform (userform1) initiates when a command button (Weekly Summary) is clicked. I've linked texts boxes in userForm2 to cells in a hidden worksheet; this is where I'm holding the dates and office location until userform1 is initiated. I also have labels in userform1 linked to the same cells in the hidden worksheet so that when userform1 is initiated the office and date range appear at the top of userform1.
Here's the problem, when I click command button "Weekly Summary" the office location shows up perfectly however, the labels I have linked to cells in the hidden worksheet that contain dates do not update (i.e. they show the dates that were previously in those specific cells. I have to close userform1 and re-open it to get the dates to update.
I need the user to be able to choose a date range and office location when they enter the workbook. Then, I need userform1 to show the date range and office location (without having to open it, close it and re-open it) that the user chose on opening the workbook.
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.
I have been trying to remove or disable the message on update to other worksheet " To update all linked click yes......" I have try the following unsuccessfully
Sub auto_open() Application.AskToUpdateLinks = False End Sub
On the menu bar choose Edit ---> Links Can not choose manual, as the option is grey out (disable) I would prefer a vba solution, but I am open to anything to get rid of this message
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB: Private Sub Worksheet_Change(ByVal Target As Range) Application.ScreenUpdating = False Dim Rng As Range Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
In Excel, I have created a userform where a user inputs parameters into various textboxes. A simulation runs based on these user entered values. All the VB code is in this form. There are some textboxes and charts that are supposed to get updated as the simulation runs so that the user can view the parameters change as the simulation happens (it is a "do loop").
Everything is fine except the charts and textboxes don't display the most current value. They display the starting value during the "do loop " execution. Once the do loop quits, they then display the final values and chart.
I have me.repaint and chart.refresh inside the do loop to display the most recent values. none work, as far displaying the most current values.
I have a userform for data entry. I am able to make codes for Add ( Add entry to database), clear ( Clear userform ) , Cancel (Exit userform). I have some more buttons and functions to be assigned to them but not able to write code .
Need codes for :
1) Have search box which searches Mat id in the complete database and returns value in the search result listbox. When we click on the result in listbox , the userform values are filled with the values that the mat id has . Then if user wishes he can update teh details for that mat id , and click on update button . the data is updated in the database. Or he can delete the entry from database by clicking on delete button.
2) Have arrows which will navigate through database ( need macros for that ) .
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with: 1. I'd like the UserForm to open when the workbook opens. 2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B 3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
Not sure if I am linking this correctly but here it goes...http://www.excelforum.com/excel-prog...ification.html
This is a previous post link that is now solved but I have a new question based on the code in the post. I would like to know how to add a search and update ability to the user form I have created. I am newb with user forms so I apologize in advance for my lack of knowledge.
And yes I know the way it is set up now it is depositing data in two different locations; this is for a specific purpose.
I have a form that i am using that I would like to update at certain points in the code. I have the screenupdating set to false but it seems that this is keeping the userform from refreshing as well. Is there a way to refresh the userform without turning the screenupdating back on (because the user cannot see what is happening behind the scenes.
I have a form that allows users to enter details and retrieve details of data already entered. How can I make it so users can update the data in the subform?
I have developed a functional User Form that works like a charm. The form will Add New Records to my database and Get Next and Get Previous records. This all works like a charm. I am stuck on how to search by Last Name or Employee Number and then to Update the Existing Record. If I change anything in an existing record as the VBA is written today, my only choice is to add a new record to the end of the database. I have added Command Buttons, but I'm lost as to how to write the code. Here's what I have so far:
VB:
Dim currentrow As Long Private Sub cmdGetNext_Click() Range("A2").Select ActiveCell.End(xlDown).Select lastrow = ActiveCell.Row
I have been playing around with this and are totally baffled,userform service,enter pl094 in combobox1 ,first part looks up sheet1 and works well.
If I change overhauled date it changes on sheet1 ,but will not write to sheet repairs,has done in the past as you can tell from entries, have tried irow and c.row but for some reason will not write any more entries.
I have a userform that populates a list of names. As a name is added in column "D" column "C" updates a reference number using the formula =IF(D2="","",C1+1). I can get the formula to copy to the spread sheet but as a new name is added the formula stays the same. If I enter a name in cell D2 everything is fine but when I make the next entry in row 3 the same formula is entered as if it were text and not as a formula. so I wind up with a column of formulas that all say =IF(D2="","",C1+1) reguardless of what row the formula is in.
I have a time sheet which is used by around 15 people. Part of the timesheet is a userform which adds a new sheet and names it with the seleted month and year. I have made a few changes to my timesheet which I wish to update on other peoples sheets. I am going to send out a speadsheet with a macro that people can run and it will automatically make the changes to their timesheet. I have done all the work for updating the various formats and formuals but I have hit a bit of a brick wall when trying to change the code on a user form via a macro. It would be great if I could either overwrite all of it or add a some lines of code from a specific line number.
What i want to be able to do is select an item from combobox (comboCPM) and then be able to check off some or all of the checkboxes then up date that line items record.
Check box value can be a "x" or "true" dont really care.
I have gone though the combox excercise at www.contextures.com, but when I try to use that logic in my spread sheet I get nothing in my drop down... just blank spaces
I have been working on a userform for entering in and editing data in a spreadsheet, but I'm stuck with the code for updating the edited data.
I have two pages on the Userform, one for adding a new entry, and one for editing an existing entry.
On the page for editing an existing entry, I have a combobox that displays information in the text boxes based the selection. What I need to be able to do is click save once I have made changes to the information in the text boxes and then have that information saved in the spreadsheet.
I have figured out all of the other buttons in the userform, but I am struggling with this last one. Here is my spreadsheet with some sample information entered in : ExcelFile.xls
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB: Private Sub UserForm_Activate() TextBox1.Text = ActiveCell End Sub
I came across a userform which was perfect for my needs, as I only had to create additional fields, which I did and have attached. However, since I have more than 10 fields, I was getting an error with respect to the listbox function, where it stated that the list property could not be found. I gathered from the searches I did, that this is the max limit for this particular function. I have been unsuccessful in finding a solution, partly because I don't know very much and I'm not understanding how to incorporate some of these solutions into the vba code. I've created simple userforms before, but this one is a little more advanced than my current capabilities.
I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
I am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5 10 15 20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
I have to append the cell value with a user input string in to the same cell. i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.
The issue that I have is with the cell selection within the code for the form.
For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on. How can I make ure the output is going to the same cell?
Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then
Dim MyForm As New UserForm1 MyForm.Show
Else
Exit Sub
End If
End Sub
'Code for the userform is below:
Private Sub CommandButton1_Click() If TextBox1.Text = "" Then
' the user input is mandatory MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field" TextBox1.SetFocus
Else
' append the cell value with user input in the text box '****issue is here in the next line ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")" Hide
I have a sheet with names and subdividers (Ent, Ver) on the columns, and dates on the rows. I am trying to make a form update the sheet when the name, ent or ver, and date match. I have attached a copy of my sheet to help explain that. I don't know much vba, but I can make a userform just fine. Trouble with most places is that the userforms only update based on empty cells, not based on more complex criteria.
I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
I have a sheet that creates a list of columns that may need to be updated or edited as necessary. Column A is a list of names that are alphabetized automaticaly from column D, so any change in column D would need to be reflected in column A. The attached sheet will (I hope) make things clearer.
