Is it possible to use more than one cell to change my spreadsheet? I need to hide various rows and change print area based multiple cells.
For example, if I type .84 into B20 I want it to adjust hide rows 63 to 124 and the print area to stop at I62, but if I then type in "US Form" into cell J20 I want it to hide rows 94 to 124 and print to I94.
How to detect a change in a spreadsheet, but how do i etermine on which cell the change happened?
Basically, I need something like this, if in the range of b1:b30 a cell is changed by the user, let say B??, then change or modify (via a subroutine) cell A??.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'
' detect which cell in the range b1:b30 changed
' then modify the cell to the right (or left) of the changed cell
'
End Sub
I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:
View 4 Replies View RelatedI wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I have a row of cells named B1 and B2.
Today I want the value in B1 to be the product of A1 times A2.
Tomorrow, I will create another row of cells named C1 and C2. I will change
the value of A1 and I want the value in C1 to be the product of the new A1
times A2.
I do not want the old value in B1 to change from what it is today.
I received a CSV file with 2500 entries, but instead of being in 1 column, from 1 - 2500, they are spread across the top of the spreadsheet (1 in each header column). How do I make them go down instead of across??
View 2 Replies View RelatedI have two sets of data. The first set is my top 100 customers from last year in column B and their total sales in column C, their rank is in column A (sorted from highest sales to lowest). Then I have the same data except it's this years data in columns E, F and G. In column H, I want to display the change in rank from last year to this year.
The only way I can think of to do this is by putting a lot of if then statements that compare the cells and return a number which is then added up to give the rank change. We're talking about 200 if/then statements that have to be created individually.
I have a workbook in xl2002 that has a data sheet with approx 50 columns and 500 rows which is populated from a querytable querying another workbook. There are no formulas on this data sheet.
I have another 5 sheets, only one of which actually has formulas on it and these refer to the Data sheet above (some fairly beefy Sumproduct formulas in the main, but only 1056 in total (only about 650 of these are Sumproducts - the remainder are simple = A1 type or Match formulas with the third argument as True (ie quite efficient)).
There are also 3 dynamic named ranges in the workbook, which are utilised by the Sumproducts/matches. An example Sumproduc is as follows:....
I have a series of dates that I need filled down the spreadsheet, however the dates change at different intervals.
The best way I can describe it would be;
IF: Cell contains text
THEN: Copy Text
ELSE: Paste Text
Rinse and repeat!
My spreadsheet looks something like: ..
If you look at the file I attached you will see the tabs at the bottom are months of the year. I know how copy a sheet but every time I make a new month tab I have to retype the month in the top left corner of the table, in the tab, and other places. This gets really repetitive when I have to do this for literally around 20 other spreadsheets like this.
What I'd like is a way to create new month tabs that automatically rename the month and year in chronological order on the sheet and tab if possible. 2 months it's because I'm constantly having to tweak spreadsheets for my boss. It'd be pointless to go ahead and make a template because then I'd have to go back and change the code for every month. So I just create tabs and edit code month by month.
I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?
I can provide a small copy of a workbook, if needed.
[Excel 2003] I have 2 spreadsheets: one to summarize data from a 2nd detail spreadsheet. I'm analyzing work order information for a service operation.
I'm using dynamic name ranges, as follows, for the detail:
WO_Num =OFFSET('WO Tracking Log'!$A6,0,0,COUNT('WO Tracking Log'!$A:$A),1)
Other detail data is defined as these examples show:
GM_X =OFFSET(WO_Num,0,8)
OpenDate =OFFSET(WO_Num,0,1)
All detail data begins in Row 6 in the detail spreadsheet.
In the Summary spreadsheet, it appears to make a difference where my calcs are located in order for my COUNTIF's to work correctly. As long as I keep my summary calc (to total the number of work orders in the detail) in Row 2 of the Summary, it works fine...but if EITHER I move my calc down a row OR if my detail drops down a row because a row was added above (where I have just header info), my summary totals change?!?! I don't understand.
Here are two examples of the calcs I'm using in the summary:
=COUNTIF(WO_Num,">0")
=COUNTIF(GM_X,"X")
Can someone tell me what is going on? What I'm doing wrong?
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I would like to know if there is a way to expand the selection of cells from the current cell you are on to the very bottom cell available in the spreadsheet.
For example, I want to apply a formula from A12 - the very last A cell row in the spreadsheet.
I want to edit a cell's value without changing the formula the cell contains.
View 10 Replies View RelatedWorkbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies View RelatedOften I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies View RelatedIt also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies View RelatedIf the user selects, annual bill on the calculation type box:
1. Then I need the spreadsheet to use the figure 365 in cell G14.
2. I also need it to times the figure put into G15 by four.
3. It also needs to divide the readings in cells D9,D10,D11 by how many days in cell D7 and them times by 365 and put the answer in E9.
If the user selects bill to date on the calculation type box:
1. I need to copy the figure in D7 to G14.
2. The number in G15 needs to be divded by 90 and times by how many days in cell D7.
Usually I use data connections (using http://www.....) to pull several worksheets(tables) from another spreadsheet. Currently I had a set of worksheets that created in an unstructured manner, the tables are not entered from Row 1 (see attached mockup). Besides using VBA programming, if there a simple way to connect and extract these tables to a fresh spreadsheet for computation. So the users can continue to perform data-entry and this consolidated spreadsheet will refresh whenever open for reporting and visualisation.
View 4 Replies View Related
