UserForm Show. Cannot Find The Specified Object
Jan 10, 2007
I know there is something I am missing here and I can't really find the solution I need in past threads. I have a macro that calls about three macros in a row, then once it has done those tasks, I want it to show a particular userform using the userform.show statement. However, when it comes to show the userform I get an error saying that it cannot find the specified object? This is quite frustrating and I think I fixed it in another part a while ago, but I can't remember how.
View 2 Replies
ADVERTISEMENT
Mar 11, 2008
I have a code that runs when I open the workbook. It asks if this is a new quote, if it is it should then open userform1. The problem is that sometimes when I click yes I get a "Path/File access error" popup, and then a VBA error box with "Run-time error '75' Could not find the specified object".
When i debug, it highlights the line "userform1.show"
IF i end, and then run it from within VBA it will then run fine.
Sometimes when I open the workbook it will just crash excel, and when I reopen it, it runs fine.
Simple code -
Sub Workbook_Open()
answer = MsgBox("Is this a new quote?", vbYesNo)
If answer = vbNo Then
Else
userform1.show
End If
End Sub
View 4 Replies
View Related
Jun 8, 2009
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
View 9 Replies
View Related
Jul 25, 2006
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies
View Related
Nov 11, 2006
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
View 7 Replies
View Related
Mar 21, 2007
1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.
2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?
3) am i going about this the wrong way with the objects? should i be after vba code?
View 4 Replies
View Related
May 30, 2014
I want to add a website script to UserForm , WebBrowser Control.
[Code] .......
How Can I add this script to WebBrowser as VBA Code?
View 1 Replies
View Related
Jan 11, 2010
I have been trying to setfocus to any other object on my userform with absolutely no luck at all?
In the code below I open a dialog box to import a text file (with CommandButton1), if no file is selected the user is prompted, this works fine. However it leaves focus to the textbox and the user would have to click on some other object and re-enter the textbox to open the dialog box again.
View 3 Replies
View Related
May 29, 2013
I was just trying to work around a problem with multiple UserForms in project. I have assigned Object variables oUserForm1 and oUserForm2 to represent UserForms of specific names.
VB:
Dim oUserForm1 As Object
Dim oUserForm2 As Object
Set oUserForm1 = VBA.UserForms.Add("Data" & CStr(X))
oUserForm1.Y = Y
[Code] .....
When oUserForm1 shows new data are inserted and another macro runs with a line to hide the opened UserForm.
In my project manager this user form name is i.e. Data1 (for x = 1), but the syntax Data1.Hide returns error. After that line it ask me to close the TOP most modal UserForm.
But When I use Me.Hide all works well.
My question is: Does VBA not see the name of the userform ("Data1") because I have used the oUserForm1 variable to give it a focus to it?
View 1 Replies
View Related
Feb 28, 2013
Here is the scoop.
I have a userform that has a lot of textboxes that are formatted as date fields. Some of them have a default value and are locked=true, enabled=false. For those ones I have a checkbox next to them so the user can unlock and enable the textbox if they so desired.
Well the checkboxes and textboxes have a similar naming scheme, but are not numeric (they are not CheckBox1, CheckBox2, etc). As an example they one grouping is Cust1RelExpUnlock (this is the checkbox) and Cust1RelExpDateBox (this is the textbox). The difference in their name is the last portion (Unlock or DateBox).
Now when the checkbox is selected the code I want looks something like this:
Code:
Private Sub Cust1RelExpUnlock_Click()UnlockDateBox Cust1RelExpUnlockEnd Sub
Where UnlockDateBox is the function I'm having difficulty with and is supposed to be generic enough to work on any grouping assuming my naming scheme is consistent.
Using a combination of the Left() and Len() functions I can get the unique aspects of the name. Then concatenate it with "DateBox" as required. However I'm getting type mismatch errors, or object required erros. I tried various combinations of Dim _____ As Object, As Control, As Textbox... with no success.
I'm getting the correct name as a string, how do I make it work so I can reference the textbox.enabled/.locked?
Code:
Private Sub UnlockDateBox(Ck)
Dim CkDate As Control 'Tried control, textbox, object
Set CkDate = ProjectInputForm.MultiPage1.Object ' tried just using ProjectInputForm, and Object
Dim CkName As String
[Code] .........
View 4 Replies
View Related
May 22, 2009
I have a userform with 10 rows of data with 8 colums in each row... I am trying to figure out how to dynamically address the object names (ie Textboxes).
Short and simply let's say I have 10 Text boxes named textbox1, textbox2, textbox3, etc
I want to address them in a loop as follows
Private Sub Clear_Fields()
Dim field As Object
For x = 1 To 10
field = "textbox" & LTrim(Str(x))
field.Value = "1"
Next x
End Sub
Obviously I'm missing something here as I get the error Object Variable or With Block Variable not set
View 9 Replies
View Related
Oct 20, 2006
In design mode on my UserForm, I have an object on top of all other objects (it's hidden until a button is clicked). That's how I designed it and it was working fine when I ran the form. Now, when I run the form and click the button, the object appears at the bottom below all other objects. I've tried closing Excel & re-opening it, setting the ZOrder in design mode and in the CommandButton code--nothing works. If I did do something to cause this--I have no idea what it was. I've been moving and re-sizing some objects, but not adjusting the ZOrder.
View 9 Replies
View Related
Jun 3, 2009
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
View 9 Replies
View Related
Apr 19, 2006
I want to use the following to launch a userform I created.
Sub showuserform()
Dim ans As Boolean
ans = msgbox("do you want to show the userform?", vbYesno)
If ans = vbYes Then
userform.show
End If
End Sub
The trouble is that if I click yes, nothing happens.
View 4 Replies
View Related
Jan 20, 2008
I have been working on large project using Excel VBA for several days. My code seems to be working correctly, but I have more to do and now, when I drag an object from the toolbox onto a UserForm, the object is not added to the list of objects on the form. If I go back to versions of the project that I was working on several days ago, there is no problem. If I run "Workbook Rebuilder", the objects that I have dragged onto the form are then added to the object list, but I still can't add new objects to forms from within the VBA editor. Is the project corrupted, or is there some other explanation, and are there any fixes? The code runs about 50 pages, and there are over 20 forms, so redoing from scratch is only a last resort option.
View 3 Replies
View Related
Nov 6, 2013
Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
View 6 Replies
View Related
Jul 30, 2012
How do you use the Application.CommandBars in the CommandBar Object to find a button.
View 1 Replies
View Related
Aug 6, 2013
This was my attempt, it says 'Object required'
Private Sub Worksheet_BeforedoubleClick(ByVal Target As Range, cancel As Boolean)
If Target.Column = 16 Then
Select Case Mid(Target.Text, 1, Worksheet.Function.Find("to", Target.Text, 1) - 2)
Case "CAS"
MsgBox ("Cashiers")
View 2 Replies
View Related
Nov 10, 2008
Is there a way to find the embedded chart object name?
View 9 Replies
View Related
Nov 6, 2009
I am trying to run a macro that i have copied from another workbook (which works fine) and when i try to run the macro i am getting a 'compile error' which says "Can't Find Object or Library" and takes into VB editor which highlights the word "Trim", which is part of a formula. What does this mean? I can't understand why the same macro will work in another workbook but not in this one. Below is the full code, I would have attached the workbook but it would not work for you as it opens and saves files that you would not have. Hopefully someone can understand from the code.
View 10 Replies
View Related
Oct 21, 2006
I added this code to a userform initialize & now I get a message ' can't find object or library '. Which library do I have to activate in Tools, References.
Dim x As Integer
ComboBox1.AddItem "0"
For x = 1 To 20 Step 1
ComboBox1.AddItem Format(x, "0")
Next x
ComboBox1.Value = Sheet2.Range("E1").Value
ComboBox2.AddItem "0"
For x = 2 To 90 Step 2
ComboBox2.AddItem Format(x, "0")
Next x
ComboBox2.Value = Sheet2.Range("E2").Value
The word Format is highlited in userform initilize.
View 9 Replies
View Related
Jan 10, 2008
I'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
View 5 Replies
View Related
May 3, 2014
I am trying to find particular text in a cell then format adjacent cells in the same row. In my code below I am trying to search for "*[Tx]*" using Like, however this is formatting all text that contain "T".
View 7 Replies
View Related
Mar 29, 2009
I want to UserForm.Show and minimize Excel at the same time then restore Excel when the Form is closed.
View 4 Replies
View Related
May 10, 2014
I have worksheet with cell A1 always change simultaneously (input from other source), in cell A2 I put formula, so value in A2 always change depending value in cell A1. The problem is I want to show that value A2 in userform VBA. I tray using textbox (in property textbox control source I set to A2) but not working because Cell A2 change from formula to static value.
View 10 Replies
View Related
Sep 2, 2009
I have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
View 3 Replies
View Related
Sep 24, 2009
I have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.
View 6 Replies
View Related
Dec 20, 2012
I have created a user form where I have two Dates fields. Date Leave (three comboxes, CmbDay, CmbMonth and CmbYear) and then I have written the following code
Private Sub Label4_Click()
If CmbDay.ListIndex -1 And CmbMonth.ListIndex -1 And CmbYear.ListIndex -1 Then
If IsDate(CmbDay & " " & CmbMonth & " " & CmbYear) Then
MsgBox "You selected " & Format(CmbDay & " " & CmbMonth & " " & CmbYear, "dd/mm/yyyy"), , "Date selected"
[Code]....
I have got the code from there.
But I want the show the same date field in another field as Date Join. I have changed the names of Combo Boxes but it is not working.
I want to show the same combo boxes in another field. How do I do that?
View 2 Replies
View Related
Mar 6, 2013
I have a user form with several command buttons.
Is there a way to show that excel is calcutaing when one of the command buttons is pressed?
The button starts a series of calculation that take a while to complete.
It would appear to other users of my spreadsheet that excel or the user form is not functioning correctly.
It would be neat if there is a way to show a % complete bar. but a simple graphic or text will also work.
View 2 Replies
View Related
Nov 20, 2006
I'm trying to display a graph I've created in a worksheet, in a userform. But it won't work ..
Private Sub UserForm_Initialize()
Sheets("graphraw1").Select
image1 = ActiveChart.ChartArea.Select
End Sub
View 9 Replies
View Related
