How could I create a menu that displays cells from another sheet when the appropriate menu value is selected?
For example, the menu (on sheet 3) would have:
Week 1
Week 2
Week 3
If I select Week 1, I want to display cells B4:B10 from sheet 2 underneath the menu. If I select Week 2, I want it to display cells B19:B25 from sheet 2 under the menu.
I know how to turn the autocomplete on and off but I don´t have a clue where I configure the data range or the cells to display the list when the combo box is clicked.
I am assuming that this is done in the Edit mode at "linkedCell" and LisfFillRange ... yet I can´t get this to work.
is there a way to get a cell to display a list, but only in one cell? I know how to get multiple words into a cell, but can i make them go ontop of eachother.
ex)
a1=dog
b1=cat
I can make c1=dog cat , but is it possible to make
c1= dog
cat
When inserting "1" in the cell under soup, i was thinking it will bring up a list of its ingredients and how much of that ingredient. The values are listed in the same spread sheet below.
The amount of the ingredient is in D50 (80grams) and the item type next to it in E50(onion)
Is it possible to put in "1" soup then it displays all the items in both those cells range example(D50-E50 to D60-E60)?
Is it possible to put the value "2" in soup and it shows double the measurements? example (160grams) (onion)
How to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
I have designed a multiple list box on my userform and display it on one of the cells in the spreadsheet but with each list item separated by a comma when its display on excel.
The problem with my code is the delimiter appears at the first list item, but it should only appear if more than one list item is chosen.
|Apple|Orange
I was thinking if there is something like if gItem = 0 then only display sFruits Else display what I have below???
VB:
For gItem = 0 To FruitsList.ListCount - 1
If FruitsList.Selected(gItem) = True Then
sFruits = sFruits & delimiter4 & FruitsList.List(gItem)
End If
Next
.Cells(gRow, "AO").Value = sFruits
Hoping someone would be able to help me with this. I have a sheet (example attached) and this sheet has a number of varying description types in the W coloumn (usually approx 10,000 rows). This field is manually input so there could be spelling mistakes and/or non standard descriptions.
What I would like, if possible, is a macro that would look at the D column and if this is 'GENERAL LEDGER', it would then look at the W column.
An input box would come up, and would list the different descriptions it found in column W, and number them. It would only list each different description once.
e.g.
1. Bank charges
2. Bank charge
3. Cash
4. Fund Custodian Fees
5. Fund Manager fee
6. Interest income cash account
7. Interest income cash acc
8. Miscellaneous expenses
9. Miscellaneous income
10. Other income
11. Sec lending comm
12. Sec lending commission income
13. Tax Reclaimable - Dividends
14. Withholding tax dividend
The user would then be able to type in the corresponding numbers, if possible seperated by a space, comma or semicolon and the macro would then run through the sheet and delete the entire row if D was GENERAL LEDGER and W was the selected description.
I have a field called “Age”. What I want to do is; If I type in the person’s age say “26” then I want another cell to display an age range (i need to entered the age ranges i want eg “16-20, 21-29, 30-39” etc. So if I type in 26 in the first filed I want to second cell to display “20-29”.
View 3 Replies View RelatedWant to be able to select a month (Jan - Dec) set in a range A1:L1. When the selection is made, I want the selected cell to be displayed in a separate location e.g. cell C4, but if the selection is outside the range A1:L1 then C4 to remain blank.
View 5 Replies View RelatedIn cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
How can I get the last cell with data, show in other cell? For example last cell populated info in total cell.
Date Cases Within 30 Days
01-Sep-0622.83
02-Sep-0622.78
03-Sep-06
04-Sep-0622.86
05-Sep-0622.82
06-Sep-06
07-Sep-06
Total22.82
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedI'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View Relatedif i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
I cant seem to work around this in excel.
For example.
I got work sheet with all data, and i need something like, if cell A1 = Left, and cell A2 = right, display only a range of data, say all data in row P to R and row U to W only accordingly to the criteria i set in a new worksheet in same workbook. And i need the display data to update automatically everytime i change the criteria.
Can I have a formula in A1 cell to display the No. of cells in selection (in a range) any where in the sheet. Just the No. in A1 cell is sufficient
View 4 Replies View RelatedI have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side.
There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
scheduledemo.xlsx
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
In my example you will see my name list that changes with a array to data validation. Seems like you can find ways around things most of the time but this time
View 4 Replies View RelatedIs there a formula that can display values in a list? I can do this with a piviot table or a filter, but was wondering if I can do it with a formula?
i.e
[Data]
A B
Simon 24
Mike 31
Simon 18
Simon 51
David 71
Mike 61
Simon 47
David 12
I want to display only simon's Values i.e:
24
18
51
47
I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
View 1 Replies View RelatedI have the following table with weeks to display for the holidays and my column H has a drop down list of the first column in the table below with the Named Range, "SNCODE.Season_Codes".
The other two Named Ranges are, "SNCODE.Season_Codes.Start" and "SNCODE.Season_Codes.End"
I need my column K to display a list of weeks from the first week to the last week. For example, the cell in column K for Valentine's Day should have 1, 2, 3, 4.
Basic 1 53
Promotional 1 53
Seasonal Spring 1 13
Seasonal Summer 10 26
Seasonal Fall 23 39
Seasonal Winter 36 53
Valentine's Day 1 4
Halloween 31 40
Christmas 36 48
I have been trying to figure out how to use a named range (on another sheet) to validate the user entered data in a specific column. All my attempts at utilizing worksheet_change event have ended in errors. I've created a simple workbook that shows what I'm trying to do and have attached it to this message. The 'Sample (Data)' worksheet has the data table that would be completed by the user. On the 'Validation' worksheet I have named the range to be used to validate the data as 'rngVal'. So when something is entered under the 'Expense Type' heading, the code would verify that the value entered was contained in the 'myVal' validation list. If it was not present in the list, a msgbox would instruct you to try again. After stealing bits of knowledge and code from many of the posts on this site I cobbled together the following (which results in an error at the 'set rngFind' line):
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngFind As Range
'Set Target = Cells(ActiveCell.Row, ActiveCell.Column)
Set rngFind = Range("rngVal"). Find(Target.Value)
'If data in column C changes, do the following
If Target.Column = 3 Then
'If the value is found on the validation list, do nothing.
If rngFind Is Nothing Then
Else
MsgBox "You must enter one of the following in this cell:"
With Application
.EnableEvents = False
.Undo
.EnableEvents = True
End With
End If
Else
End If
End Sub
I am developing a workbook, one part of the book is to track discipline I have a page for this and a userform on the front page to enter data into it. I would like if you will a summary box (list box or whatever is best) displayed on the front page and I would like a line to appear in that box maybe saying john smith requires a warning. I need this to appear if john smith has been entered 3 times into the name column on the discipline sheet however only if the offence is the same 3 times for example 3 lates not 2 lates and 1 non attendance.
After it displays this line in the summary box I would like to be able to double click it where a small userform appears where a user can then select discipline received or something and for this lien to disappear in the summary and all 3 entries in the discipline sheet.
Any way to display the description of options (list) which in this case is a numbering code (like ECG201) in a data validation cell.
The length of the cell is not long enough for the users to know the appropriate description of the selected lists. I am now thinking there should be a way to display the description of each item so that users will know that ECG201 means "International College of Excellence", for example, instead of having to go from one worksheet (area) to another to know what an option means.
I'm trying to replicate the VBA code for displaying scenarios using a drop-down list that I found on this website: http://www.tvmcalcs.com/blog/comment...rop_down_list/
However, I've not quite been able to get it to work on my worksheet. This is my
I have a workbook that lists various shipment numbers and their contents to several locations. What I am trying to do is, on a different worksheet in the same workbook, list all shipments to one location; having different worksheets for each specific location.
I am sure there must be an extremely simple solution to this, however I am unable to locate it.
Also I would like the separate location worksheets to autoupdate when new shipments are entered on the main worksheet.