I've got it mostly figured out (I thought), but Excel doesn't like something about the code. I'm using Office 2010. When it tries to run the second line of this code, I get a 438 error:
Code:
Selection.Characters(83, Len(Selection) - 82).Cut
I have a sheet with 3 columns, A B and C
column B has content such as:
term 1 (c: text a)
term 2
term 3
term 4 (c: text b)
etc.
desired output:
term 1
term 2
term 3
term 4
etc.
Can someone create a macro for me to delete the (c: ...) in Column B but leaves all of the other column data alone.
I have made a dynamic calculator which will calculate the total sale based on 3 criteria in 3 different cells as follows:-
I would like to derive the sales qty in cell C5 if all the 3 conditions in the range B2:B4 is true.
In this case the sales qty for Style-Colour-MRP combination(9103-PINK-399) should be 6.
I am unable to figure out with the formula for the same....
I'm trying to come up with a VBA function that would return cell values based on another cell value.
I can do this by comparing a range (column of cells) with the cell value to match and then return the value of the cell next to it.
For instance,
The function should search a column for partial text, as follows:
TS ID
PDT ID
TS 1.1
PDT 1
TS 1.2
PDT 2
TS 1.3
PDT 3
TS 2.1
PDT 4
TS 2.2
PDT 5
TS 3.1
PDT 6
TS 3.2
PDT 7
In the above table, the function should for partial text and return string as follows:
TS covered
PDTs
TS 1.1, TS 1.2, TS 1.3
PDT 1, PDT 2, PDT 3
TS 2.1, TS 2.2
PDT 4, PDT 5
TS 3.1, TS 3.2
PDT 6, PDT 7
So basically I am searching for partial text TS 1. and so on
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
My goal is following:
I do an inventory of my schools equipment and have much info in many columns. But I just want to concentrate on column A.
This is example of the room names at my school and look like this:
Column A
A01
A01
A02
A02
....
I am looking for a macro that will copy the text-based contents of a random cell in the range B100:B135 to a callout text box. The name of the callout is Autoshape 13. The callout should be cleared before pasting the contents of the next random cell into it. This macro will be assigned to a button.
View 5 Replies View RelatedI'm trying to obtain a result based on the number of characters in a cell. If the cell content is blank or contains 9 digits then leave blank.
Any other result must provide the outcome of "incorrect number supplied".
I've tried the following formula but it doesn't work.
This is for Excel 2007,I have two sets of model numbers. One set is the full model numbers of the units we use, and the other is an abbreviated form used to lookup up certificate numbers. I need a way to match these up so I can use one set of search criteria to find out if there is a match. Here is an example of what I need to match with a partial text match:
H,AE35(6,9)36+TD and AE3563636D145C2501AP
H,RE36(6,9)36 and RE36936C145B2505AP
if I could do this with a formula that matches multiple items at the same time (ie; if A & B & C match=true) with the above model number being one of those items (certificate numbers are issued for sets, but the other model numbers are fine).If that's not possible, a one time VBA run to match all of the abbreviations at once would also work. If these items are matched up with a one time VBA, the VBA needs to account for their being more than one match for each abbreviation depending on the size of the unit.
So H,AE35(6,9)36+TD could be matched to:
AE3563636D145C2501AP
AE3563636D175C2501AP
AE3563636D210C2501AP
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code:
Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1)
On Error GoTo TabErrorHandler
oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT()
Worksheets("DVD Lijssie").Activate
If ActiveCell.Value 0 Then ' Change all in to ... ... ...
ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "["
With ActiveCell.Font
.Name = "Arial Narrow"
.Size = 8
.ColorIndex = 16
End With
End If
End Sub
HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
how to combine the content of 2 cells into one cell and have the information separated by a comma.
For example:
CELL 1:
Software 1
CELL 2:
Spreadsheet Software
The desired results is:
CELL 3:
Software 1, Spreadsheet Software
I have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I am trying to use a cut and paste within a macro.
I have code working fine if I do a copy and paste which is as follows:
Got a bit of an issue with using the paste special function. I am trying to record a macro that would copy a group of cells that are verticle, and then paste them onto a new row in a different sheet.
I have done this in the past by enabling the record macro function and inserting a new row going back to the sheet with the data selecting the data copying it, and then selecting pasting area using paste special and enabling the "Transpose" box.
Although today i found this didin't work in fact it (this is the best i can describe it) merged each cell with the cell below givng a type of square function as can be seen below.
After i click ok, this happens
As you can see the cells are now twice the size.
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
It appears that my toolbar paste button has been disabled and I think this is due to an auto open macro.
Does anyone know what macro code I will need to run to regain the use of this button?
Can I write Copy and paste function in an IF statement
PTPO #Part #Line #DescriptionVendor #UOMLTPO Entry #Due DateAllowed DaysWork daysQty OrderQty RecvdUnder/ OverRectp dateDays Po lateMB550427917495072PANEL, SW MOLDED SLVR0BAY008EA204/16/20075/14/200728215014-365/7/200702013135/30/2007-280232023236/1/2007-28025
formulae in the column Q " days PO, Late" =IF(P3
I am creating a macro that will be copying values from one worksheet and pasting them in one of two possible locations into another worksheet - depending on a title for my data. The title I will search on is located in worksheet "Sheet1". If I find the title "WESTERN PERSPECTIVE" in Sheet1, I want to copy a range of values into one place on the other worksheet "Sheet2", otherwise if I find the title "EASTERN PERSPECTIVE" I want to copy a range of values into the 2nd place on my other worksheet "Sheet2".
My logic should follow:
If found "WESTERN PERSPECTIVE" in Sheet1, paste values into area 1 of Sheet2, else do nothing.
If found "EASTERN PERSPECTIVE" in Sheet1, paste values into area 2 of Sheet2, else do nothing.
I do not require coding for the copying and pasting, just the IF logic based on Found fields. I do have the coding which selects the field if the 'Find' is successful:
Cells.Find(What:="WESTERN PERSPECTIVE", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
How would I create a shortcut to automatically copy the contents of cell H1 to cell K1, in other word I would like to hit a shortcut key and have the contents of that cell pasted 3 cells to the right on the same line. I have to do this over and over again down the worksheet. I am working on taxes and want to copy values over to the expenses column as I find them.
I would also like to know if it is possible while having cell D1 highlighted I could have a shortcut created that would copy the value three cells over in H1 to cell K1. That would be the fastest, but I don't know if it is possible?
The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.
When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.
As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.
I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.
I am working with some data that consists of two types of messages: one containing vessel speed and another containing vessel type. Both messages share a common ship identifier number. What I'd like to do is run through column A (ship ID), check column B (ship type), and if column b has a value, to paste that value in all instances of that ship ID.
View 1 Replies View RelatedIs it possible to create a User Defined Function that replicates the "Copy/ Paste Special" function? I tried recording a Macro and using that as the basis for the User Defined Function but it didn't work.
View 7 Replies View RelatedFirst I want to copy the calculations from sheet "Calc" to sheet "Cost" then in column J in the same row, the background color will change like conditional format on numbers. The code works when copy the calculations from sheet "Calc" to sheet "Cost" but the color function (codes in sheet "Cost") does not work after pasted in sheet "Cost". But the color funtion does works when enter numbers in Column J alone. I know there must be a simple codes that can do this while paste from other sheet. This code is in module
View 3 Replies View RelatedI'd like to know if it's possible (Excel 2007) to insert a function/button into a cell, which when clicked, will paste whatever is on the clipboard?
You can see a screenshot of my document here, and I'd like to insert a paste funtion in the red circle. Is it possible?
[URL]
I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
View 3 Replies View Relatedwhat I do with excel: I have an excel sheet that has over 18,000 rows in it. Since it would be a nightmare to scroll around to find what I want, I use the Custom Sort and Filter options under Editing>Sort&Filter. So for example, I can omit 17,800 rows using a specific setting so that I can work with a more reasonable 200 rows. Moreover, the 200 rows comes from all over the spreadsheet. Meaning their row numbers are not always consecutive.
Here's the problem: Whenever I try to copy anything from this "edited or filtered" excel sheet, the resulting paste is not an exact copy. Excel perfectly copies the first rows up until the point where the row numbers ceases to be consecutive. So, the copy function messes up somehow when the data being copied comes from a different section of the original 18,000 rows.
In case this isn't clear enough...
Let's say that the original file has rows 1,2,3,4,5,6,7,8,9,10
Once I filter/custom sort, I see rows 1,2,3,8,9,10
When I try to copy/paste 2,3,8,9, excel copies 2,3, but messes up the rest of the 8,9. And I end up with a totally useless copy that's generally shorter than it's supposed to be.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....