VBA Selecting Cells Only With A Specified Value
Mar 15, 2008To make things simple, I have a range of A1:A10. Within this range I only need to select cells thats contain "Tax".
View 9 RepliesTo make things simple, I have a range of A1:A10. Within this range I only need to select cells thats contain "Tax".
View 9 RepliesI have 2 Cells
Cells( 2,1) and Cells ( i , 1) with "i" a While Counter, and i need to Select All the Cells between that, including both cells.
I'm tring Cells(2,1):Cells(i,1) but obviously this didn't work
A macro that only selects cells which are coloured light green. I need this so that I can add it to an existing macro that I've written to remove conditional formatting from these cells only.
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
when run a macro to make the macro select all the cells in a specific column that only contain data i.e. i have a spreadsheet 5 columns wide by 23 rows deep, the macro at the moment selects the 5 columns (this never changes) but the number of rows always changes 123, 56, 1, etc i need to to always select the rows that have data.
View 14 Replies View RelatedI found the code below which randomly selects number and places them into column "I". However, I need the code to search through column "F" and randomly select numbers from column "F" and place the result in column "I".
' Select the indicated number of items from the
' currently selected cells.
Public Sub SelectRandom(ByVal num_to_select As Integer)
Dim num_items As Integer
Dim indexes() As Integer
[Code] ........
I use this code to select highlighted cells within a column
Code:
For Each CELL In Range("A1:A" & Cells(Rows.Count, "A").End(xlUp).Row)
If CELL.Interior.ColorIndex xlNone Then
CELL.Select
End If
Next
the thing is that it is working from bottom to top, is there a way to make it work from top to bottom?
how do I select all cells from say B6 to the one above the active cell, and all the cells below the active cell, ie i want to select all cells in a column except the active cell and the first 5 cells. (in VBA of course).
View 8 Replies View Relatedsomeone the VBA code which only selects visible cells in a sheet.
i.e. if for example, range("a1:d5") contained data BUT
range("a6:d100") contained formulae but NO data
the macro would only highlight range("a1:d5")
However, when say range("a6:d10") contained data, then the macro would highlight range("a1:d10")
and so on.
I want the mcro to do this without me having to manually change the ranges when running the macro.
How do I use SpeciaCells to select cells in a range with a certain value?
In the same manner that you can use SpecialCells to select blank cells and then delete that entire row I want to do the same for a cell containing a specific value/text
I have been using SpecialCells to assign a value in blank cells as a temporary marker. I then need to delete the rows with the temporary markers. I have not been able to use SpecialCells to select the temporary markers .
I have two excel sheets with lots of data in, that i import from a database. Based on these two sheets I make four other sheets that are suppose to get input from this two sheet. To decide what lines I shall copy to the other sheets, I use a filter. But my problem is that there can occur new data too the two main sheet....
View 6 Replies View RelatedUsing VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I have two simple columns of data: one with names (Column A) and the other with numbers (Column B).
I am looking for the most efficient way of selecting cells in Column B of a certain value and also selecting the cells to the left of those selected cells in Column A.
I have the current code based on SpecialCells, it works most of the time but for some reason it's buggy and sometimes returns an error. Is there another way doing this without using Special Cells?
Code:
Sub SelectbyValue()
Dim Cell As Object
Dim FoundCells As Range 'Range that's found
Dim WorkRange As Range 'Range to search
Range("E1:F4").ClearContents
[code]....
I'm working with Excel 2003 on a peice for work that requires users to enter their current grade and, if they have one, a temporary grade. Another sheet in the workbook needs to add together all those in a certain grade and who answered a certain way to a drop-down table, so that I can use it to figure out what percentage of staff are of each grade. At the moment it looks like this:
=SUMPRODUCT(--(Work_Data!F2:F9827="Grade 1"),--(RIGHT(Work_Data!K2:K9827,3)="Top 25%"))
Which only draws information from the current grade (column F) and the answer they give (Column K). What I can't come up with is a formula that will only take column F as long as column G hasn't got a temporary grade, but if it does have a temporary grade will take column G instead.
When I click on a cell, for example T13, cell U13 will also automatically be selected. I have looked everywhere for something that is making it do that, but can't find an answer.
It doesn't happen with every cell. I have to do some more clicking around to see if there is a pattern.
I'm trying to write a VBA code that'll select cells in column B that contains text until it comes to a blank row, the amount of data changes each time, i've tried two different approches but i'm unable to get it to hold the cell, it only moves down one cell each time i run the macro, no errors though.
View 14 Replies View RelatedI'm working on a macro that's supposed to copy certain cells from a sheet, and paste them in another. But the problem is that I can't find a way to get them all in one go. The sheet that I am copying from has a mile-long list that looks something like this:
OR0220018NO-RING 21,95 x 1,78 N270 BS-0205,00
OR0220018N90O-RING 21,95 x 1,78 N290 BS 02022,00
OR0220018VO-RING 21,95 x 1,78 V275 BS-02010,00
OR0220018V90O-RING 21,95 x 1,78 V290 BS 02013,00
OR0220020NO-RING 22,00 x 2,00 N2709,00
OR0220020VO-RING 22,00 x 2,00 V28024,00
OR0220025NO-RING 22,00 x 2,50 N2705,00
It goes over 3 columns. I want to select column A, B and C in every row that contains the letters "N270".
I'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
I'm working with Excel 2007 and all of a sudden its selecting two cells. I've tried what others suggested of the F8, I even shut it down and opened it again. I took my template and saved it as a normal book, opened that one and again same thing.
View 1 Replies View RelatedIn the routine:
Private Sub bttnPCsFind_Click()
Application.ScreenUpdating = False
Cells.Select
ActiveWindow.ScrollColumn = 10
Application.ScreenUpdating = True
Application.Dialogs(xlDialogFormulaFind).Show
Application.ScreenUpdating = False
ActiveCell.Select
ActiveCell.Select
ActiveWindow.ScrollColumn = 10
End Sub
Is there a way to set the range of cells for the DialogFormulaFind to search against that doesn't involve Cells.Select? Functionally the above routine works perfectly but, if given the option, I would prefer to not have the cells highlighted (and thus darkened) while performing the search. If I remove this line altogether then nothing in the search is ever found. It is a visual glitch I am looking to get around.
Does anybody know how Excel manages the selection of the cells when performing a find using Ctrl + F (when performing a find using the hot key or menu item the cell range isn't selected (highlighted) ahead of time and thus, remain white during the search/Find Next). Is this possible to code this behavior using VBA?
I have some code as below
Range(ActiveCell, ActiveCell.End(xlDown)).Select
This should basically go down a list and stop when there is a blank cell. However due to a previous operation in my excel program, it is not doing so.
Basically this list has been formed from copy and pasting from a list of formulas. some of these formulas return a result and others return "" leaving the cell empty.
When i have pasted i have used paste special/values... but it still seems to paste something into these cells because this macro wont work.
I even went and manually selected the first blank cell and pressed the delete button and when i do this it correctly selects the cells only with content, so clearly when pasting a "" value it stops the activecell operation from working..
I'm trying to use the SUM function with non sequenced cell but the Range or any other function won't allow me to activate the selecting cells if there are more then 41 cell, I wrote somthing like so:
Sub Test()
Dim str AS String
Dim R AS Range
str = "A1,A3 ...... ,A57" 'this is only an example, assum that there are _
more then 41 cells
Set R = Range(str) 'Here is the Problem, I get a Runtime error 1004 _
Application-defined or object-defined error
R.select
End Sub
But if the str input was a 41 or less Cells address string then it works
I am currently setting up protection on an excel sheet - I have a proceedure to open a specific worsheet and lock and unlock cells according to whether or not certain information exisit. My question is, although I can lock cells and prevent users changing them using code I can't seem to stop them selecting cells in the first place - this is obviously achieveable from the 'Protection'>'protect workbook' menu but I want to do it from code since the sheet is unprotected and reprotected a number of times during a session....
View 4 Replies View RelatedI have created a userform to get cells from the user using the selection property. The userform is supposed to do the following: prompt the user to select the first range. When the OK button is clicked, the selected range is stored to the variable first_range. Then the userform prompts the user to select the second range, and stores the selected range to second_range once the OK button is clicked. My problem is that I am unable to select cells while my userform is open. Is there a userform property allowing one to select cells while a userform is open?
View 8 Replies View Relatedhow can i (in VBA) select 1 row (eacht time, it's an ? iteration? (repeating)), while the first 2 cells are merged, like:
a b c d .....
1
2 merged
3 merged
and i need to select row 3 only
and if someone could explain me how i can use the " find" function (on another sheet)
How to get Excel to select all cells within a specific column that contain a specific character. In this instance, I need to select all the cells which contain a comma...
And even better would be if I could get Excel to not just select all the cells in a specific column containing a comma, but each of the rows in which those cells reside.
I am looking to produce a Macro to select conditionally formatted cell's from a worksheet, i got as far as selecting those cell's but i need it to only select cells that have been filled.
View 6 Replies View RelatedI have a spreadsheet wherein if I press ctrl-A (normally Select All) it is only selecting a limited range of cells ($B$12:$M$22). If I press ctrl-A again from there then it selects all.
I can see something like that being useful in some cases and annoying in others, but I have no idea what is causing it. Some of the cells in that range are locked and others are not. Some of the cells outside that range are also locked while others are not. In any case, the sheet is not protected.
I have a column of values D1:D200. Using this =CELL("address",INDEX(D1:D200,MATCH(MAX(D1:D200),D1:D200,0))) it displays the cell with the largest value in. I have been trying to using VBA to select the 10 cells above and below the displayed CELL reference and so far I have failed. The largest value will always be somewhere in the centre of the column of values (between D50 and D150). I am looking to chart the trends leading up to and passed the largest value. I have been trying Range and Cells with no success
View 3 Replies View RelatedI have a column that has mostly empty cells. I want to select only the ones that have data so I can perform an operation on all of them. Empty cells must be excluded from selection. I do not know where the bottom of the data is.
The solution needs to be in VBA where it is part of a larger macro affecting the user's worksheet.