VBA Code which would ask me to select a value between N or S.
If I select "N" then the pivot field items "Guj","Del","Mum" should get selected.
If I select "S" then the pivot field items "Bng","Kar","KER" and "TIR" should get selected.
I record macro and hit select all and that action won't record. what's the macro code for select all in excel. i assumed it was the same as word
selection.wholestory
but it's not
Is there a simple bit of code which I can add to a button which will always select the next tab along?
Looking to add a 'next tab' button at the top of each sheet so it can be run through quickly, almost as a presentation.
I could just do
Sheets("TabName").Select
But that would involve doing a new one for each sheet, and would need modifying if I then re-ordered the sheets.
What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View RelatedI have a code that gives me path of all files inside a folder. I want to modify it.
I want to select files (individually or in group) inside a folder and then get the path. All files are .xlsx in folder.
[Code] .....
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
I have a workbook and have created a filter across range A1 - BU1. I want to filter column BQ. In this column I want to use the filter to show all values except for 0.
View 2 Replies View RelatedI have 8 car models in column A of sheet1 and I have a list box control with every car model on sheet 1 as well. I would like code to select all the models from column a in the list box with code.
View 2 Replies View RelatedI am trying to copy/paste the same data range from many sheets into a summary sheet.
Specifically, I'm attempting to copy (B697:G710) from 100 or so sheets into the summary sheet, one after another
I don't know much about VBA and am using the macro recorder. Unfortunately, when I attempt to paste the data from the next sheet to the summary sheet, it overwrites the info from the prior sheet. I have attempted using the down arrow and Ctrl downarrow but the recorded macro continues to select the same cell in the summary sheet into which it pastes the data.
I have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
I have a row of formulas that reference other sheets in my workbook (i.e. Cell A4=Sheet2!A1, Cell B4=Sheet2!B1, etc). I need to have VBA find the last cell in that row with data. I tried "End(xlToRight).Column" but it goes all the way to the end because all of the cells have formulas. I need to find the last cell that is empty of data or maybe >0 would work.
View 9 Replies View RelatedI have created the following code by recording a macro. The ActiveCells (“A1.A5203”) were based upon the actual number of records at that time. I wish for this macro to be used in a template and the actual number of records will vary from time to time. What do I need to add to this code to allow the AutoFill function to operate and fill only the actual number of records that exist.
ActiveCell.FormulaR1C1 = "=LEN(RC[-2])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
ActiveCell.Offset(0, 1).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]=8,""0""&RC[-3],RC[-3])"
Selection.AutoFill Destination:=ActiveCell.Range("A1:A5203")
ActiveCell.Range("A1:A5203").Select
I have a macro which when run firstly unprotects the worksheet, makes a change,then protects the sheet again with line of code below.
Sheet.Protect Password:="whateveritis"
What do I need to add to that to ensure that it allows selecting unlocked cells only.
I have made a sheet where the user can insert/delete rows in a certain intervall of rows. The upper row is 17, that is I have named the cell "First" and then the last row "Last" and then I am using integers:
Dim intStartrow As Integer
Dim intLastrow As Integer
intStartrow = ActiveSheet.Range("First").Row + 1
intLastrow = ActiveSheet.Range("Last").Row - 1
So it is only possible to add/delete rows if the markerer is in between the above rows.
Now I would like to select the rows, from first to last. Since the rows are never the same, users add and delete rows all the time, I can not use
Range("A17:Z49").Select
Can I somehow make a range selection using the Integers, somethimg like
With ActiveSheet
Selection."intStartrow:intLastrow"
End With
In my macro, I need code that will select all the rows that contain data in a given column, minus the first row which has a header.
View 6 Replies View RelatedI am adding shapes with text (msoShapeOval) to an image on a worksheet but I cant get the size of the "ShapeRange" to work dependant on the value assigned to "sTxtlen".
I had msgbox's within each Case but none were triggered allthough using another msgbox to show the length of sTxtLen is correct prior to the Select Case.
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
correct below code?
Code:
Private Sub WorkSheet_Change(ByVal target As Range)
Dim rngdv As Range
Dim oldval As String
Dim newval As String
If target.Count > 1 Then GoTo exithandler
On Error Resume Next
Set rngdv = Cells.spcialcells(xlCellTypeAllValidation)
[code].....
i would like to select multiple options from dropdown... but it is not working...
I have a button set to bring up an inputbox. enter serial number.
What I need to do is enter the serial number and then have the macro look through a
single column of values to match it then go to that row.
This seemed so simple I thought I could get it but alas here I sit...
I have tried to search the forum for a similar code but haven't found one that was close enough to make sense to me. I have ut together alot of individual actions, but how to get the value inputed to "search" the column and once found go to that row.
I also need to make sure it accounts for new rows being added in the future. (no set row range)
I have a spreadsheet that contains multiple rows per user. I need a combo or list box that pops up asking them to select their name from the drop down list. The list would be based on column A and would only include their name once.
When they select their name, the macro would then open the Form option from the Data menu, the Criteria button would be pushed and their name entered into the form, to return the first record their name appears on, then they could forward through the records, and update using the Next record button.
I need to write some code that will write a sum formula and include all the cells to the left of the active cell, however this range is variable. I suspect it would be something like:
ActiveCell.FormulaR1C1 = "=SUM(xlLeft)"
but this just enters the formula "SUM(xlLeft)".
I've had a look through the forum and can't see an answer, so apologies if I'm duplicating something!
I have a spreadsheet where column O has five conditions:
1 PO in
2 High Probability
3 Medium Probability
4 Low Probability
Blank
I need to colour code the whole row based on the value in the cells; if there were four conditions, I could do this with conditional formatting, but with five (with white as the fifth condition), I need to look at VBA.
However, I'm having difficulty colouring the whole row; how do I do this?
e.g. what I need to do is:
If O2 = "1 PO in"; Select A2:T2; Colour green
In addition, I need to ensure that if there is no data in column D, but column O is "1 PO in", it is highlighted in a separate colour. I have a macro for that, but don't know whether in needs to be put into the code before or after the macro needed above...
How do i check a checkbox on an excel worksheet?
View 5 Replies View RelatedI have two worksheets. ws1 contains a large number of dates on column 3. ws3 contains around 20 dates on column 3.
I want to pick two dates randomly in ws1 that does not already exist in ws3.
Here is my working code, but it is really slow to process. How to optimize this code? Also I would like to add a function where if the macro is not able to find two random dates that aren't already in ws3 then exit loop.
VB:
Set ws1 = thisworkbook.sheets(1)
Set ws3 = thisworkbook.sheets(3)
lr = ws2.Cells.Find(What:="*", After:=[A1], SearchDirection:=xlPrevious).Row
Set rvis = ws2.Range("c2:c" & lr).SpecialCells(xlCellTypeVisible)
mynodate = 0
[Code] .....
this function I manage to select the result in terms of the objectives of the product code. and I need to search for a piece of the product code. The results will be the same in accordance with fragments but not the exact code.
View 5 Replies View RelatedI am looking for the code that I would use so that when the workbook is opened it would always open with "Main" sheet.
View 4 Replies View RelatedI need the code to allow a user to select a column of their choice in an open workbook of their choice so that data can be lookuped up and changed. I am happy to create the code to do the lookup/changing, however the nearest I have found is the use of an inputbox which is limited to the active spreadsheet only. Some people have said the input box could be used over to another spreadsheet but I have not found that to work.
What I will need returned is the workbook name, sheet name and column. That will allow me to point to that and do the task.
This code could be used by 5 people and those 5 people could be running it on 20 different spreadsheets.
I thought this would be easy to find but it has eluded me. When using Excel normally, if you do a simple lookup formula, or create pivot function, excel prompts the user to select the workbook/sheet.
I have worksheet with data . Everytime number of rows with some data in it changes . Like sometime there are 100 rows with data or other tome it may be 57 only. I want to write VB code to select only those rows which have data. Thereafter I will use Pivot Table code to get required information. I know VB code to generate Pivot Code. But what happens is that if any blank row gets selected in data range for Pivot Tables, thereafter grouping by "Month" is not done.
go through attached file? In Module 1 ( which contains macro ) instead of R1C1:R8C4 , I want range with data only.
I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2()
ActiveSheet. Range("a1").Copy _
Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0)
End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next
Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8)
On Error Goto 0
If userInputCell Is Nothing Then
MsgBox "Cancel pressed"
Else
Msgbox "You selected " & userInputCell.Address(,,,True)
End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub